- 28 11月, 2009 13 次提交
-
-
由 Nick Thompson 提交于
Creates a method allowing pin settings to be logically grouped into data structure arrays and provides an API to configure the pinmux settings to enable the relevant pin functions. Signed-off-by: NNick Thompson <nick.thompson@gefanuc.com>
-
由 Nick Thompson 提交于
Remove volatiles and memory mapped structure accesses and replace with readl and writel macro usage. Signed-off-by: NNick Thompson <nick.thompson@gefanuc.com>
-
由 Grazvydas Ignotas 提交于
When the board is booted without serial cable attached (which is how most of them will be used) UART RX is left floating and sometimes picks noise, which interrupts countdown and enters U-Boot prompt instead of booting the kernel. Fix this by setting up internal pullup on UART RX pin. This does not prevent serial from working as the internal pullup is weak. Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
-
This patch adds a unified s3c24x0 cpu header file that selects the header file for the specific s3c24x0 cpu from the SOC and CPU configs defined in board config file. This removes the current chain of s3c24-type #ifdef's from the s3c24x0 code. Signed-off-by: NKevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Seunghyeon Rhee 提交于
Fix stack_setup to place the stack on the correct address in DRAM accroding to U-Boot standard and remove conditional compilation by CONFIG_MEMORY_UPPER_CODE macro that is not necessry. This macro was introduced and used only by this board for some unclear reason. The definition of this macro is also removed because it's not referenced elsewhere. Signed-off-by: NSeunghyeon Rhee <seunghyeon@lpmtec.com> Tested-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Minkyu Kang 提交于
Because of Frame error, Parity error and Overrun error are occured only receive operation, need to masking when error checking. Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
Cleans up the s3c24x0 header files: s4c24x0.h: removes the use of 'volatile' from the S3C24X0_REG8, S3C24X0_REG16 and S3C24X0_REG32 register typedef's. Registers are always accessed using the IO accessor functions which cast the register address as 'volatile' anyway so it isn't required here. s3c2400.h and s3c2410.h: insert a blank line between the static inline functions Signed-off-by: NKevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
-
由 Minkyu Kang 提交于
This patch moves the s3c64xx header files from include/ to include/asm-arm/arch-s3c64xx Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
This patch moves the s3c24x0 header files from include/ to include/asm-arm/arch-s3c24x0/. checkpatch.pl showed 2 errors and 3 warnings. The 2 errors were both due to a non-UTF8 character in David M?ller's name: ERROR: Invalid UTF-8, patch and commit message should be encoded in UTF-8 #489: FILE: include/asm-arm/arch-s3c24x0/s3c2410.h:3: + * David M?ller ELSOFT AG Switzerland. d.mueller@elsoft.ch As David's name correctly contains a non-UTF8 character I haven't fixed these errors. The 3 warnings were all because of the use of 'volatile' in s3c24x0.h: WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt #673: FILE: include/asm-arm/arch-s3c24x0/s3c24x0.h:35: +typedef volatile u8 S3C24X0_REG8; +typedef volatile u16 S3C24X0_REG16; +typedef volatile u32 S3C24X0_REG32; I'll fix these errors in another patch. Tested by running MAKEALL for ARM8 targets and ensuring there were no new errors or warnings. Signed-off-by: NKevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Tom Rix 提交于
Fetched from http://www.arm.linux.org.uk/developer/machines/download.php And built with repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm commit 156171c71a0dc4bce12b4408bb1591f8fe32dc1a Signed-off-by: NTom Rix <Tom.Rix@windriver.com>
-
由 Mark Asselstine 提交于
value The SheevaPlug DevKit is shipped with 4x8 by 1Gb DDR devices in two banks for a total of 512MB of RAM. Based on this configuration the existing values for SDRAM address control register are incorrect and result in random kernel oops as memory is incorrectly accessed (while for example extracting a large tarball such as a rootfs). Based on the hardware configuration along with the supporting documentation from Marvell these are the correct values, as well this change mimics values previously used in Marvell's own u-boot git tree for the SheevaPlug. Other variants of the hardware such as the PogoPlug and TonidoPlug may have different memory configurations but to properly support those additional board directories should be maintained or a better system to support other kwb*.cfg is needed. Tested on SheevaPlug DevKit. Signed-off-by: NMark Asselstine <mark.asselstine@windriver.com>
-
由 Sandeep Paulraj 提交于
Void function was returning 0 in the m41t94 rtc driver. This makes it similar to m41t62 rtc driver. Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Tom Rix 提交于
From http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm Commit id 0996391139f43d032335b5360db11da62a2cbb39 Signed-off-by: NTom Rix <Tom.Rix@windriver.com>
-
- 25 11月, 2009 1 次提交
-
-
- 23 11月, 2009 6 次提交
-
-
由 Stefan Roese 提交于
This patch cleans up the PPC4xx I2C intrastructure: - Use C struct to describe the I2C registers instead of defines - Coding style cleanup (braces, whitespace, comments, line length) - Extract common code from i2c_read() and i2c_write() - Remove unneeded IIC defines from ppc405.h & ppc440.h Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This code got included accidentally. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Daniel Gorsulowski 提交于
While hard_i2c support is not available (see http://lists.denx.de/pipermail/u-boot/2009-March/049751.html), this patch enables soft_i2c on AT91SAM9263 SoC. Signed-off-by: NDaniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
-
由 Peter Tyser 提交于
These commands are only enabled when the hush shell is enabled and can be useful in scripts such as: while true do echo "Booting OS..."; run $bootcmd; echo "Booting OS failed"; sleep 10; done Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
Shorten the overly-verbose help message of 'help' and clean up some redundant ifdefery while we're at it. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
command.c should contain common code related to commands, not miscellaneous command implementations. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
- 22 11月, 2009 2 次提交
-
-
- 21 11月, 2009 1 次提交
-
-
由 Sandeep Paulraj 提交于
This patch adds support for NAND devices with a page size of 4K in the DaVinci NAND driver. The layout matches the layout that TI uses for 4K page size NAND devices in the kernel NAND driver. Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 19 11月, 2009 9 次提交
-
-
由 Matthias Fuchs 提交于
This patch shrinks the PMC440 u-boot binary (from next branch) to fit into 384kB again. Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Matthias Fuchs 提交于
This is not the sequoia board. Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
The latest changes in the u-boot/next branch increased the size of the alpr image a bit more. Now it doesn't fit into the 256k reserved for it. This patch now removes the commands "askenv" and "irq" which are not needed in the production systems. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
-
由 Stefan Roese 提交于
This patch removes the duplicted implementations of the pci_master_init() function by introducing a weak default function for it. It can be overridden by a board specific version. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch removes the duplicted implementations of the pci_pre_init() function by introducing a weak default function for it. This weak default has a different implementation for some PPC variants. It can be overridden by a board specific version. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch removes the duplicted implementations of the pci_target_init() function by introducing a weak default function for it. This weak default has a different implementation for 440EP(x)/GR(x) PPC's. It can be overridden by a board specific version (e.g. PMC440, korat). Signed-off-by: NStefan Roese <sr@denx.de> Acked-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
-
由 Hui.Tang 提交于
This patch add nand_read_buf() for S3C2410 NAND SPL. In nand_spl/nand_boot.c, nand_boot() will check nand->select_chip, so nand->select_chip should also be initialized. Signed-off-by: NHui.Tang <zetalabs@gmail.com>
-
由 Sandeep Paulraj 提交于
This patch updates a check condition in the NAND driver. The check condition is similat to what is in linux/next. Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Sandeep Paulraj 提交于
NANDs with page size of lesser than and equal to 2K are reaching EOL. They are bing replaced with NANDs of page size 4K and above. To support this we have to extend the eccpos field Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 16 11月, 2009 5 次提交
-
-
由 Dirk Behme 提交于
Add support to use second and third I2C bus, too. Bus 0 is still the default, but by calling i2c_set_bus_num(1/2) before doing I2C accesses, code can switch to bus 1 and 2, too. Don't forget to switch back afterwards, then. Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>
-
由 Wolfgang Denk 提交于
-
-
-
-
- 14 11月, 2009 3 次提交
-
-
由 Amul Kumar Saha 提交于
Define and use CONFIG_ENV_ADDR_FLEX and CONFIG_ENV_SIZE_FLEX for storing environment variables. Signed-off-by: NRohit Hagargundgi <h.rohit@samsung.com> Signed-off-by: NAmul Kumar Saha <amul.saha@samsung.com>
-
由 Amul Kumar Saha 提交于
This patch adds support for Flex-OneNAND devices. Signed-off-by: NRohit Hagargundgi <h.rohit@samsung.com> Signed-off-by: NAmul Kumar Saha <amul.saha@samsung.com>
-
由 Mingkai Hu 提交于
The commit 66372fe2 manually relocated the bbt pattern pointer, which can be removed by using full relocation. Signed-off-by: NMingkai Hu <Mingkai.hu@freescale.com>
-