s3c64xx: move s3c64xx header files to asm-arm/arch-s3c64xx

This patch moves the s3c64xx header files from include/
to include/asm-arm/arch-s3c64xx
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

board/samsung/smdk6400/lowlevel_init.S

@@ -34,7 +34,7 @@
 #include <config.h>
 #include <version.h>
 
-#include <s3c6400.h>
+#include <asm/arch/s3c6400.h>
 
 #ifdef CONFIG_SERIAL1
 #define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART0_OFFSET)

board/samsung/smdk6400/smdk6400.c

@@ -30,7 +30,7 @@
 
 #include <common.h>
 #include <netdev.h>
-#include <s3c6400.h>
+#include <asm/arch/s3c6400.h>
 
 /* ------------------------------------------------------------------------- */
 #define CS8900_Tacs	0x0	/* 0clk		address set-up		*/

cpu/arm1176/cpu.c

@@ -33,7 +33,7 @@
 
 #include <common.h>
 #include <command.h>
-#include <s3c6400.h>
+#include <asm/arch/s3c6400.h>
 #include <asm/system.h>
 
 static void cache_flush (void);

cpu/arm1176/s3c64xx/cpu_init.S

@@ -24,7 +24,7 @@
  */
 
 #include <config.h>
-#include <s3c6400.h>
+#include <asm/arch/s3c6400.h>
 
 	.globl mem_ctrl_asm_init
 mem_ctrl_asm_init:

cpu/arm1176/s3c64xx/reset.S

@@ -21,7 +21,7 @@
  * MA 02111-1307 USA
  */
 
-#include <s3c6400.h>
+#include <asm/arch/s3c6400.h>
 
 .globl reset_cpu
 reset_cpu:

cpu/arm1176/s3c64xx/speed.c

@@ -31,7 +31,7 @@
  */
 
 #include <common.h>
-#include <s3c6400.h>
+#include <asm/arch/s3c6400.h>
 
 #define APLL 0
 #define MPLL 1

cpu/arm1176/s3c64xx/timer.c

@@ -40,7 +40,7 @@
 
 #include <common.h>
 #include <asm/proc-armv/ptrace.h>
-#include <s3c6400.h>
+#include <asm/arch/s3c6400.h>
 #include <div64.h>
 
 static ulong timer_load_val;

cpu/arm1176/start.S

@@ -35,7 +35,7 @@
 #ifdef CONFIG_ENABLE_MMU
 #include <asm/proc/domain.h>
 #endif
-#include <s3c6400.h>
+#include <asm/arch/s3c6400.h>
 
 #if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE)
 #define CONFIG_SYS_PHY_UBOOT_BASE	CONFIG_SYS_UBOOT_BASE

drivers/mtd/nand/s3c64xx.c

@@ -28,7 +28,7 @@
 #include <common.h>
 
 #include <nand.h>
-#include <s3c6400.h>
+#include <asm/arch/s3c6400.h>
 
 #include <asm/io.h>
 #include <asm/errno.h>

drivers/serial/s3c64xx.c

@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#include <s3c6400.h>
+#include <asm/arch/s3c6400.h>
 
 #ifdef CONFIG_SERIAL1
 #define UART_NR	S3C64XX_UART0

drivers/usb/host/s3c64xx-hcd.c

@@ -25,7 +25,7 @@
  */
 
 #include <common.h>
-#include <s3c6400.h>
+#include <asm/arch/s3c6400.h>
 
 int usb_cpu_init(void)
 {