- 20 3月, 2018 1 次提交
-
-
由 Alex Kiernan 提交于
Pass tools/env/fw_env.c through indent to correct style violations. This commit consists of only one non-whitespace change: tools/env/fw_env.c:549: error: do not use assignment in if condition Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com>
-
- 19 3月, 2018 15 次提交
-
-
由 Jun Nie 提交于
U-boot proper signature is not verified by SPL on most platforms even config SPL_FIT_SIGNATURE is enabled. Only fsl-layerscape platform support secure boot in platform specific code. So verified boot cannot be achieved if u-boot proper is loaded by SPL. This patch add signature verification to u-boot proper images when loading FIT image in SPL. It is tested on Allwinner bananapi zero board with H2+ SoC. Signed-off-by: NJun Nie <jun.nie@linaro.org>
-
-
由 yannick fertre 提交于
Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
-
由 yannick fertre 提交于
Support several pixel format (8bits, 16bits, 24bits & 32bits). Add new file st_logo_data.h which contains logo stmicroelectronics_uboot_logo_8bit_rle.bmp. Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
-
由 yannick fertre 提交于
Enable the display controller, panel & backlight. Set panel display timings & set the RGB data bus. Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
-
由 Philippe CORNU 提交于
Add display controller node in device-tree. Signed-off-by: Nyannick fertre <yannick.fertre@st.com> [agust: rebased on master] Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 yannick fertre 提交于
Set the blending factor regarding the pixel format Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
-
由 yannick fertre 提交于
Set LIPCR (line interrupt position conf) register with line length. Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
-
由 yannick fertre 提交于
pxclk is useless to set pixel clock. Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
-
由 yannick fertre 提交于
Modified copyright & driver name. Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
-
由 yannick fertre 提交于
Add reset of LTDC display controller. Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
-
由 Heinrich Schuchardt 提交于
No need to initialize variables if the next usage is an assignment. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
If an event does not occur the current coding stays in an endless loop. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Eliminate (x2 - x2) which is always zero. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
(A || !A && B) == (A || B) Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
- 17 3月, 2018 15 次提交
-
-
由 Patrick Delaunay 提交于
Merge init_helpers.h in the new file init.h with only prototypes for init_cache_f_r used in common/board_f.c Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Move function prototype for common/init/board_init.c from common.h to init.h Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Move function prototypes used in common/board_r.c from common.h to init.h Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Move function prototypes for common/init/board_init.c from common.h to init.h Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Move prototypes for function used in common/board_f.c from common.h to init.h Remove weak for arch_reserve_stacks in prototype (checkpatch issue) Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Michal Simek 提交于
This file is completely unused and it should be removed as the part of ppc405/ppc440 xilinx platform removal. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Heinrich Schuchardt 提交于
Remove a link to a non-existent file. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: NAndrew F. Davis <afd@ti.com>
-
由 Heinrich Schuchardt 提交于
Remove non-existing paths. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Remove non-existing directories. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Heinrich Schuchardt 提交于
Change due to commit b08c8c48 ("libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>") Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Fix an incorrect path. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
arch/arm/cpu/armv7/mx*/ does not relate to any existing directory. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Patrick Delaunay 提交于
The 2 functions board_power_mode and board_poweroff are no more existing in U-Boot code (check with grep) This patch updates the documentation and removes the unnecessary prototypes. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Remove the prototypes for 4 functions no more existing in U-Boot code (checked by grep): - checkflash - checkdram - mdm_init - setup_board_extra Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Add a new file init.h with the prototype for arch_cpu_init Add a prototype for mach_cpu_init() to avoid a warning: no previous prototype for ‘mach_cpu_init’ It is a first step to move all the functions prototype used during U-Boot initialization (board_f.c / board_r.c) from common.h to init.h Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 16 3月, 2018 9 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
It is safe to always setup the pinmux for UART1 and UART3 to be used in early_padconf and then if these pins are needed later on, they will be re-muxed. This allows us to drop the usage of CONFIG_CONS_INDEX here. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Jagan Teki 提交于
Due to adding various new functionalities with SPI and SPI-FLASH subsystems which are rounding in Mailing list for year these long term supporting spi driver which never seen any update with driver-model conversion. So added migration plan for DM_SPI and DM_SPI_FLASH with deadline v2018.09 Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
由 Madan Srinivas 提交于
Adds a dedicated defconfig to build TI K2L secure devices and updates MAINTAINERS. k2l_hs_evm_defconfig is created from the k2l_evm_defconfig and removes support for SPL, as SPL is not supported on K2 HS devices. Corrects SYS_TEXT_BASE for HS devices. Also adds TI_SECURE_DEVICE and FIT_IMAGE_POST_PROCESS to include support for secure image creation and authentication Signed-off-by: NMadan Srinivas <madans@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com> Acked-by: NAndrew F. Davis <afd@ti.com>
-
由 Madan Srinivas 提交于
This patch updates the default u-boot env for K2L HS devices to install the secure boot monitor and load the fitImage during boot. Signed-off-by: NMadan Srinivas <madans@ti.com> Acked-by: NAndrew F. Davis <afd@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Ruslan Bilovol 提交于
Remove busy looping during watchdog reset. Each polling of W_PEND_WTGR bit ("finish posted write") after watchdog reset takes 120-140us on BeagleBone Black board. Current U-Boot code has watchdog resets in random places and often there is situation when watchdog is reset few times in a row in nested functions. This adds extra delays and slows the whole system. Instead of polling W_PEND_WTGR bit, we skip watchdog reset if the bit is set. Anyway, watchdog is in the middle of reset *right now*, so we can just return. This noticeably increases performance of the system. Below are some measurements on BBB: - DFU upload over USB 15% faster - fastboot image upload 3x times faster - USB ep0 transfers with 4k packets 20% faster Signed-off-by: NRuslan Bilovol <ruslan.bilovol@gmail.com> Tested-by: NSam Protsenko <semen.protsenko@linaro.org> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com> Reviewed-by: NLukasz Majewski <lukma@denx.de> Tested-by: NAlex Kiernan <alex.kiernan@gmail.com>
-
由 Sam Protsenko 提交于
serial# variable is needed to show the device correctly in "fastboot devices" output. It's useful when we have several devices (in fastboot mode) connected to single host and want to choose which one to flash. We can't use omap_die_id_serial() for this, because AM335x lacks DIE_ID, as can be seen from AM335x TRM. Let's do next: - reuse board_serial variable (obtained from EEPROM in set_board_info_env() function) to set serial# - if board_serial is "unknown", reuse ethaddr variable to set serial# Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Wenyou Yang 提交于
To support set/get the clock rate, add set/get_rate operations. Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
-
由 Wenyou Yang 提交于
As said in the SAMA5D2 datasheet, the PLLA clock must be divided by 2 by writing the PLLADIV2 bit in PMC_MCKR, if the ratio between PCK and MCK is 3 (MDIV = 3). This is the purpose of the driver. Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
-