- 13 10月, 2016 3 次提交
-
-
- 12 10月, 2016 36 次提交
-
-
-
-
-
-
git://git.denx.de/u-boot-fsl-qoriq由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com> Conflicts: include/configs/ls1021aqds.h include/configs/ls1021atwr.h
-
由 Lokesh Vutla 提交于
Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Lokesh Vutla 提交于
Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Bin Meng 提交于
Legacy video driver macros are not needed. Clean them up. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Now that all x86 boards have been converted to DM video, drop the legacy drivers. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
This converts coreboot to use DM framebuffer driver. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
With DM VESA driver on x86 boards, plat->base/size/align are all zeroes and starting address passed to alloc_fb() happens to be 1MB aligned, so this routine does not trigger any issue. On QEMU with U-Boot as coreboot payload, the starting address is within 1MB range (eg: 0x7fb0000), thus causes failure in video_post_bind(). Actually if plat->size is zero, it makes no sense to do anything in this routine. Add such check there. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
This adds a DM driver for coreboot framebuffer device. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
vbe_setup_video_priv() might be useful to other drivers. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
The kernel load address for zboot should be 0x1000000. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
At present only chromebook boards are converted to DM video. Other x86 boards are still using the legacy cfb_console driver. This switches to use DM version drivers. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
With DM conversion, information like "Video: 1024x768x16" is not shown anymore. Now add these verbose output back. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
This adds a DM driver for VESA-compatible device. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
For some unknown reason, coreboot framebuffer driver never works on QEMU since day 1. It seems the driver only works on real hardware. Document this issue. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Moritz Fischer 提交于
Move crosec commands from drivers/misc/cros_ec.c to cmd/cros_ec.c Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMoritz Fischer <moritz.fischer@ettus.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Miao Yan <yanmiaobest@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de> Cc: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Nishanth Menon <nm@ti.com> Cc: u-boot@lists.denx.de
-
由 Stefan Brüns 提交于
The "hostfs ls" command prefixes each directory entry with either DIR, LNK or " " if it is a directory, symlink resp. regular file, or "???" for any other or unknown type. The latter only works if the type is set correctly, as the entry defaults to OS_FILET_REG and e.g. socket files show up as regular files. Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present these functions do not touch addr, which can raising warnings about unused variables. This fixes the following warnings: sandbox_spl defconfig drivers/core/regmap.c: In function ‘regmap_read’: drivers/core/regmap.c:125:12: warning: unused variable ‘ptr’ [-Wunused-variable] uint32_t *ptr = map_physmem(map->base + offset, 4, MAP_NOCACHE); ^ drivers/core/regmap.c: In function ‘regmap_write’: drivers/core/regmap.c:134:12: warning: unused variable ‘ptr’ [-Wunused-variable] uint32_t *ptr = map_physmem(map->base + offset, 4, MAP_NOCACHE); Signed-off-by: NSimon Glass <sjg@chromium.org> Fixes: 3bfb8cb4 (dm: regmap: Implement simple regmap_read & regmap_write)
-
由 Stefan Brüns 提交于
Using readdir_r limits the maximum file name length and may even be unsafe, and is thus deprecated in since glibc 2.24. Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stefan Brüns 提交于
The readdir linux manpage explicitly states (quoting POSIX.1) that sizeof(d_name) is not correct for determining the required size, but to always use strlen. Grow the buffer if needed. Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stefan Brüns 提交于
Previously, after reading/creating the second dirent, the second entry would be chained to the first entry and the first entry would be linked to head. Instead, immediately link the first entry to head. Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stefan Brüns 提交于
Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Keerthy 提交于
The driver provides regulator set/get voltage enable/disable functions for lp873x family of PMICs. Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Keerthy 提交于
Add support to bind the regulators/child nodes with the pmic. Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Keerthy 提交于
Enable CMD_REG option. Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Keerthy 提交于
Enable palmas PMIC config options. Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Keerthy 提交于
Enable palmas PMIC config options. Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Keerthy 提交于
The driver provides regulator set/get voltage enable/disable functions for palmas family of PMICs. Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Keerthy 提交于
Add support to bind the regulators/child nodes with the pmic. Also adds the pmic i2c based read/write funtions to access pmic registers. Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Keerthy 提交于
The ctrl reg contains bit fields to enable and disable regulators, and volt_reg has the bit fields to configure the voltage values. The registers are frequently accessed hence make them part of dm_regulator_uclass_platdata structure. Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Keerthy 提交于
Add support for gpio regulators. As of now this driver caters to gpio regulators with one gpio. Supports setting voltage values to gpio regulators and retrieving the values. Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
These two options go together and it is best to do the conversion in one step. So enable DM_MMC_OPS by default if DM_MMC is enabled. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
To speed up conversion to CONFIG_BLK, enable it by default when DM_MMC is enabled. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 11 10月, 2016 1 次提交
-
-
由 Simon Glass 提交于
This should return normal errors, not device-tree errors. Fix it. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-