- 09 3月, 2018 3 次提交
-
-
由 Tuomas Tynkkynen 提交于
The following config symbols are only defined once and never referenced anywhere else: CONFIG_DBAU1X00 CONFIG_PB1X00 Most of them are config symbols named after the respective boards which seems to have been a standard practice at some point. Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
由 Mario Six 提交于
The @gdsys.cc addresses are supposed to be used for mailing lists. Switch all occurrences of @gdsys.de mail addresses to their @gdsys.cc equivalent. Also, Dirk's address was wrong in one place; fix that as well. Signed-off-by: NMario Six <six@gdsys.cc>
-
由 Tuomas Tynkkynen 提交于
CONFIG_SYS_CBSIZE determines the maximum length of the kernel command line, and the default value of 256 is too small for booting some Linux images in the wild. Signed-off-by: NTuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
-
- 06 3月, 2018 2 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
-
- 05 3月, 2018 32 次提交
-
-
由 Tom Rini 提交于
This was missing the 'S' line causing a warning from genboardscfg.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Adam Ford 提交于
This should clean up a warning about a missing phy-cells Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Heinrich Schuchardt 提交于
POWER should be after ONENAND Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Fabio Estevam 提交于
Keep spelling.txt in sync with the version from kernel 4.16-rc4. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Adam Ford 提交于
Due to evolution of the MMC driver and better support, let's remove unnecessary undefs. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
With the migration to Kconfig, the I2C block no longer exists in here. Let's clean up the comment. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Ed Bartosh 提交于
Enable DHCP support for this board. Signed-off-by: NEd Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: NMarek Vasut <marex@denx.de> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Masahiro Yamada 提交于
Thomas reported U-Boot failed to build host tools if libfdt-devel package is installed because tools include libfdt headers from /usr/include/ instead of using internal ones. This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.h and replaces include directives: #include <libfdt.h> -> #include <linux/libfdt.h> #include <libfdt_env.h> -> #include <linux/libfdt_env.h> Reported-by: NThomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Paul Kocialkowski 提交于
There are no headers for libfdt in lib/libfdt, as they are instead located in scripts/dtc/libfdt. Specifying lib/libfdt for headers inclusion in host tools results in using the system libfdt headers, which is not what we want. Change this to the proper path. Signed-off-by: NPaul Kocialkowski <contact@paulk.fr>
-
由 Heinrich Schuchardt 提交于
Add a comment indicating that the German key map assumes code page 437. Add support for character ² (square sign) in the German key map. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Marek Behún 提交于
Signed-off-by: NMarek Behun <marek.behun@nic.cz>
-
由 Mario Six 提交于
The PCA953x driver uses "gpio@%x_" as the GPIO bank name, where "%x" is instantiated with the I2C address of the chip. While this works, it becomes very confusing if a board has multiple PCAs with the same address on different I2C busses, and it also becomes an issue when a GPIO's value is to be set via the 'gpio' command, because this command only ever sets the value of the first device it encounters, leaving the other devices inaccessible to the command. As to not break boards that rely on this naming scheme, we introduce a new device tree string property "label" for the driver. If it exists, it is used to build a bank name of the form "%s@%x_" (where %x is still instantiated with the I2C address). If it does not exist, the legacy labeling scheme is used. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Faiz Abbas 提交于
Rename CONFIG_SPL_USBETH_SUPPORT to CONFIG_SPL_USB_ETHER. This enables users to block text using CONFIG_IS_ENABLED() instead of resorting to #if ladders with SPL and non-SPL cases. Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
-
由 Stefan Agner 提交于
Treat the first equal sign as a key/value separation too. This makes the script files compatible with mkenvimage input file format. It won't support variables with equal signs anymore, but this seems not really like a loss. Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Jeremy Boone 提交于
Ensure that the Atmel TPM driver performs sufficient validation of the length returned in the TPM response header. This patch prevents memory corruption if the header contains a length value that is larger than the destination buffer. Signed-off-by: NJeremy Boone <jeremy.boone@nccgroup.trust>
-
由 Jeremy Boone 提交于
Ensure that the Infineon I2C and SPI TPM driver performs adequate validation of the length extracted from the TPM response header. This patch prevents integer underflow when the length was too small, which could lead to memory corruption. Signed-off-by: NJeremy Boone <jeremy.boone@nccgroup.trust>
-
由 Jeremy Boone 提交于
This patch prevents integer underflow when the length was too small, which could lead to memory corruption. Signed-off-by: NJeremy Boone <jeremy.boone@nccgroup.trust>
-
由 Marek Vasut 提交于
This patch got dropped during the update of DTs to 4.14, re-add it back. This adds reset GPIOs to the ethernet PHYs. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
These do not need to be available early on Gen3 , so move them to the respective DT files. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Add R8A77965 M3N Salvator-XS development kit support. This kit is similar to the other Salvator-X(S) ones, except is has M3N SoC on it. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Add SDHI nodes to r8a77965.dtsi to get eMMC and SD slots operational. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Add xHCI node to r8a77965.dtsi to get xHCI USB operational. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Add generic EHCI nodes to r8a77965.dtsi to get EHCI USB operational. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Add RAVB node to r8a77965.dtsi to get ethernet operational. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Import the R8A77965 M3N DT from Linux 4.16-rc1 . Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Add entries for the R8A77965 M3N SoC. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Add entries for the R8A77965 M3N SoC. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Add entries for the R8A77965 M3N SoC. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@ni.com>
-
由 Marek Vasut 提交于
Add entries for the R8A77965 M3N SoC. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
-
由 Marek Vasut 提交于
Add entries for the R8A77965 M3N SoC. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Add entries for the R8A77965 M3N SoC. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Add CPU and PRR IDs for R8A77965 M3N SoC. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 02 3月, 2018 3 次提交
-
-
-
-
git://www.denx.de/git/u-boot-microblaze由 Tom Rini 提交于
Xilinx Kconfig changes for v2018.03 - Moving some macros to Kconfig # gpg: Signature made Thu 01 Mar 2018 10:45:58 AM EST using DSA key ID 294A0C21 # gpg: Good signature from "Michal Simek <monstr@monstr.eu>" # gpg: aka "Michal Simek (Xilinx) <michals@xilinx.com>" # gpg: aka "Michal Simek (Xilinx) <michal.simek@xilinx.com>"
-