Rsync all defconfig files using moveconfig.py
Signed-off-by: NTom Rini <trini@konsulko.com>

- Merge a fix to the gpio uclass and a test for it.

currently gpio hog function is not tested with "ut dm gpio"
so add some basic tests for gpio hog functionality.

For this enable GPIO_HOG in sandbox_defconfig, add
in DTS some gpio hog entries, and add testcase in
"ut dm gpio" command.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>

save the GPIOD_ flags also in the gpio descriptor.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPatrick Delaunay <patrick.delaunay@st.com>
Fixes: 788ea834 ("gpio: add function _dm_gpio_set_dir_flags")
Reviewed-by: NSimon Glass <sjg@chromium.org>
Tested-by: NWalter Lozano <walter.lozano@collabora.com>

- sbi: Add newline to error message
- fu540: dts: Correct reg size of otp and dmc nodes
- Enhance reserved memory fixup about PMP information passed from OpenSBI
- sifive: fu540: Add gpio-restart support
- qemu-riscv: Update QEMU run command
- Assorted fixes related to reserved memory
- fu540: enable all cache ways from U-Boot proper
- use log functions in fdt_fixup

Replace printf() and debug() by log_err() and log_debug().

"No reserved memory region found in source FDT\n" is not an error but a
debug information.

%s/can not/cannot/ - use the more common spelling.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: NBin Meng <bin.meng@windriver.com>
Reviewed-by: NAtish Patra <atish.patra@wdc.com>

Add L2 cache node to enable all cache ways from U-Boot proper.
Signed-off-by: NPragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Tested-by: NBin Meng <bmeng.cn@gmail.com>

fdtdec_get_addr_size_no_parent is not an optimized version if parent
node is already available with the caller.

Use fdtdec_get_addr_size_auto_parent to read the "reg" property
Signed-off-by: NAtish Patra <atish.patra@wdc.com>
Reviewed-by: NBin Meng <bin.meng@windriver.com>

Not all errors are fatal. If a reserved memory node already exists in the
destination device tree, we can continue to boot without failing.
Signed-off-by: NAtish Patra <atish.patra@wdc.com>
Reviewed-by: NBin Meng <bin.meng@windriver.com>

Explicitly pass the "-bios" option to QEMU to run U-Boot, instead
of the "-kernel" option, as we know that "-bios" behavior will be
changed since QEMU 5.1.0.

This also updates validated QEMU version to 5.0.0.
Signed-off-by: NBin Meng <bin.meng@windriver.com>
Reviewed-by: NAtish Patra <atish.patra@wdc.com>

The HiFive Unleashed board wires GPIO pin#10 to the input of the
system reset signal. This adds gpio reboot support.
Signed-off-by: NBin Meng <bin.meng@windriver.com>
Reviewed-by: NSagar Kadam <sagar.kadam@sifive.com>
Tested-by: NSagar Kadam <sagar.kadam@sifive.com>
Reviewed-by: NPragnesh Patel <pragnesh.patel@sifive.com>

SYSRESET uclass driver already provides all the reset APIs, hence
exclude our own ad-hoc reset.c implementation.
Signed-off-by: NBin Meng <bin.meng@windriver.com>
Reviewed-by: NSagar Kadam <sagar.kadam@sifive.com>
Reviewed-by: NPragnesh Patel <pragnesh.patel@sifive.com>

Starting from OpenSBI v0.7, the SBI firmware inserts/fixes up the
reserved memory node for PMP protected memory regions. All RISC-V
boards need to copy the reserved memory node from the device tree
provided by the firmware to the device tree used by U-Boot.

Turn on CONFIG_OF_BOARD_FIXUP by default for OF_SEPARATE.
Signed-off-by: NBin Meng <bin.meng@windriver.com>
Reviewed-by: NAtish Patra <atish.patra@wdc.com>
Reviewed-by: NRick Chen <rick@andestech.com>

The FDT blob might not have sufficient space to hold a copy of
reserved memory node. Expand it before the copy.
Reported-by: NRick Chen <rick@andestech.com>
Signed-off-by: NBin Meng <bin.meng@windriver.com>
Reviewed-by: NAtish Patra <atish.patra@wdc.com>
Reviewed-by: NRick Chen <rick@andestech.com>

The copy of reserved memory node from source dtb to destination dtb
can be avoided if they point to the same place. This is useful when
OF_PRIOR_STAGE is used.
Signed-off-by: NBin Meng <bin.meng@windriver.com>
Reviewed-by: NRick Chen <rick@andestech.com>
Reviewed-by: NAtish Patra <atish.patra@wdc.com>

Signed-off-by: NBin Meng <bin.meng@windriver.com>
Reviewed-by: NPragnesh Patel <pragnesh.patel@sifive.com>

Signed-off-by: NBin Meng <bin.meng@windriver.com>
Reviewed-by: NPragnesh Patel <pragnesh.patel@sifive.com>

Signed-off-by: NSean Anderson <seanga2@gmail.com>
Reviewed-by: NAtish Patra <atish.patra@wdc.com>
Reviewed-by: NBin Meng <bin.meng@windriver.com>

Pull request for UEFI sub-system for efi-2020-07-rc6 (2)

Fix an incorrect update of the GD register in efi_get_variable_common().
Fix an incorrect check for an FDT reg property.
Fix a device tree used for Python testing.

test_efi_fit tests fail on RISC-V currently. This is due to the
RISC-V arch_fixup_fdt() checks the #size-cells of the root node
in order to correctly fix up the reserved memory node.

Per the DT binding, the /reserved-memory node requires both
<#address-cells> and <#size-cells> and they should use the same
values as the root node. For the root node, it's not very useful
if <#size-cells> is zero.

Update #size-cells to 1 so tests can pass.
Signed-off-by: NBin Meng <bin.meng@windriver.com>

With commit 0d7c2913 ("cmd: bootefi: Honor the address & size cells
properties correctly") addr was replaced by fdt_addr. But not in the check
against FDT_ADDR_T_NONE.

Fixes: 0d7c2913 ("cmd: bootefi: Honor the address & size cells properties
correctly")
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

- fix "Synchronous Abort" when using rk3399 4K HDMI

3480 is not valid XRES, use 3840 as default.

Fixes: 05c65a82 ("video: rockchip: Support 4K resolution for rk3399, HDMI")
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # roc-rk3399-pc

efi_get_variable_common() does not use EFI_ENTRY(). So we should not use
EFI_EXIT() either.

Fixes: 767f6eeb ("efi_loader: variable: support variable authentication")
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

- fix logo on mx6ul_14x14_evk with DM_VIDEO enabled
- fix banner string overwriting the logo on small displays
- fix splash warning when building for ARM64
- fix STM32 DSI driver to probe only on supported hardware
- fix memory corruption with DSI panel drivers

- rk3188 cpu init and APLL fix;
- rk3399: Add BOOTENV_SF command;
- rk3288 correct vop0 vop1 setting;

The EDP_LCDC_SEL bit has to be set correctly to select vop0 or
vop1, but so far we have set it in both conditions, which is not
correct.

Can someone verify this is the correct way round?  vop1 -> set,
vop0 -> clear?
Signed-off-by: NPatrick Wildt <patrick@blueri.se>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

Fill characteristics of DSI data link to platform data instead of
mipi device to avoid memory corruption.
Signed-off-by: NYannick Fertre <yannick.fertre@st.com>
Reviewed-by: NPatrick Delaunay <patrick.delaunay@st.com>

Fill characteristics of DSI data link to platform data instead of
mipi device to avoid memory corruption.
Signed-off-by: NYannick Fertre <yannick.fertre@st.com>
Reviewed-by: NPatrick Delaunay <patrick.delaunay@st.com>

Copy the DSI data link characteristics from panel
platform data to mipi DSI device.
Signed-off-by: NYannick Fertre <yannick.fertre@st.com>
Reviewed-by: NPatrick Delaunay <patrick.delaunay@st.com>

Add new fields "lanes, format & mode_flags" to structure
mipi_dsi_panel_plat.
Signed-off-by: NYannick Fertre <yannick.fertre@st.com>
Reviewed-by: NPatrick Delaunay <patrick.delaunay@st.com>

Check the hardware version of DSI. Versions 1.30 & 1.31 are only
supported.
Signed-off-by: NYannick Fertre <yannick.fertre@st.com>
Reviewed-by: NPatrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: NPhilippe Cornu <philippe.cornu@st.com>

Get below warning on ARM64 platform, because the bmp_load_addr
is defined to u32.

common/splash.c: In function ‘splash_video_logo_load’:
common/splash.c:74:9: warning: cast to pointer from integer
of different size [-Wint-to-pointer-cast]
   74 |  memcpy((void *)bmp_load_addr, bmp_logo_bitmap,
Signed-off-by: NYe Li <ye.li@nxp.com>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # bpi-m1+, bpi-m64

Fix the bug that multiple lines wraps to overwrite logo bmp
display.
Signed-off-by: NYe Li <ye.li@nxp.com>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # bpi-m1+, bpi-m64

Update video bmp code so that we can display 8 bits logo on
24 or 32 bpp framebuffer.
Signed-off-by: NYe Li <ye.li@nxp.com>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # bpi-m1+, bpi-m64

The commit 84a6a27a ("rockchip: rk3188: init CPU freq in clock
driver") changed ARM clock from 600MHz to 1600MHz. It made boot
unstable due to the fact that PMIC at the start generates insufficient
voltage for operation. See also: commit f4f57c58 ("rockchip:
rk3188: Setup the armclk in spl").

Fixes commit 84a6a27a ("rockchip: rk3188: init CPU freq in clock
driver").
Signed-off-by: NAlexander Kochetkov <al.kochet@gmail.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

Move the setting for noc remap out of SPL code. Changing
noc remap inside SPL results in breaking back to BROM
boot.

Fixes commit c14fe2a8 ("rockchip: rk3188: Move SoC
one time setting into arch_cpu_init()").
Signed-off-by: NAlexander Kochetkov <al.kochet@gmail.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

Add missing BOOTENV_SF command in rk3399 config.

Fix it.

Fixes: f263b860 ("rk3399: Enable SF distro bootcmd")
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Reported-by: NSuniel Mahesh <sunil@amarulasolutions.com>
Tested-by: NSuniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

- arm: socfpga: misc_s10: Fix EMAC register address calculation

Fix EMAC register address calculation, address need to multiply
with sizeof(u32) or 4.

This fixes write to invalid address.
Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>