提交 c14fe2a8 编写于 作者: K Kever Yang

rockchip: rk3188: Move SoC one time setting into arch_cpu_init()

The setting for noc remap should goto arch_cpu_init().
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
上级 cca3b091
......@@ -7,13 +7,9 @@
#include <clk.h>
#include <dm.h>
#include <ram.h>
#include <syscon.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/grf_rk3188.h>
#include <asm/arch-rockchip/periph.h>
#include <asm/arch-rockchip/pmu_rk3288.h>
#include <asm/arch-rockchip/boot_mode.h>
__weak int rk_board_late_init(void)
......@@ -23,18 +19,7 @@ __weak int rk_board_late_init(void)
int board_late_init(void)
{
struct rk3188_grf *grf;
setup_boot_mode();
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
if (IS_ERR(grf)) {
pr_err("grf syscon returned %ld\n", PTR_ERR(grf));
} else {
/* enable noc remap to mimic legacy loaders */
rk_clrsetreg(&grf->soc_con0,
NOC_REMAP_MASK << NOC_REMAP_SHIFT,
NOC_REMAP_MASK << NOC_REMAP_SHIFT);
}
return rk_board_late_init();
}
......
......@@ -3,8 +3,11 @@
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
*/
#include <common.h>
#include <dm.h>
#include <syscon.h>
#include <asm/io.h>
#include <asm/arch-rockchip/bootrom.h>
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/grf_rk3188.h>
#include <asm/arch-rockchip/hardware.h>
......@@ -42,11 +45,17 @@ void board_debug_uart_init(void)
}
#endif
#ifdef CONFIG_SPL_BUILD
int arch_cpu_init(void)
{
#ifdef CONFIG_ROCKCHIP_USB_UART
struct rk3188_grf * const grf = (void *)GRF_BASE;
struct rk3188_grf *grf;
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
if (IS_ERR(grf)) {
pr_err("grf syscon returned %ld\n", PTR_ERR(grf));
return 0;
}
#ifdef CONFIG_ROCKCHIP_USB_UART
rk_clrsetreg(&grf->uoc0_con[0],
SIDDQ_MASK | UOC_DISABLE_MASK | COMMON_ON_N_MASK,
1 << SIDDQ_SHIFT | 1 << UOC_DISABLE_SHIFT |
......@@ -64,8 +73,15 @@ int arch_cpu_init(void)
BYPASSSEL_MASK | BYPASSDMEN_MASK,
1 << BYPASSSEL_SHIFT | 1 << BYPASSDMEN_SHIFT);
#endif
/* enable noc remap to mimic legacy loaders */
rk_clrsetreg(&grf->soc_con0,
NOC_REMAP_MASK << NOC_REMAP_SHIFT,
NOC_REMAP_MASK << NOC_REMAP_SHIFT);
return 0;
}
#endif
#ifdef CONFIG_SPL_BUILD
static int setup_led(void)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册