- 12 9月, 2015 22 次提交
-
-
由 Simon Glass 提交于
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NStefano Babic <sbabic@denx.de>
-
由 Simon Glass 提交于
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NStefano Babic <sbabic@denx.de>
-
由 Simon Glass 提交于
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 04 9月, 2015 1 次提交
-
-
由 Marek Vasut 提交于
The SoCFPGA probes mostly from OF and the OF is mandatory both in U-Boot itself and U-Boot SPL. Enable it by default. Signed-off-by: NMarek Vasut <marex@denx.de>
-
- 03 9月, 2015 2 次提交
-
-
由 Simon Glass 提交于
Add code for starting up U-Boot SPL and U-Boot proper. This is generic and makes use of devices provided by the board- or SoC-specific code. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
In 21782828 we accidentally dropped out hilsilicon and cm_t43. Bring these back in. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 02 9月, 2015 4 次提交
-
-
由 Peng Fan 提交于
To i.MX6UL, SYS_L2CACHE_OFF is selected, but there is no Kconfig entry for SYS_L2CACHE_OFF. Then "select SYS_L2CACHE_OFF" does not effect for i.MX6UL, which is not expected. Since SYS_L2CACHE_OFF is mainly used by ARM architecture, add it to arch/arm/Kconfig. Signed-off-by: NPeng Fan <Peng.Fan@freescale.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@konsulko.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Peng Fan 提交于
Move TARGET_xx Kconfig option based on mx6 to arch/arm/cpu/armv7/mx6/Kconfig. Add enable "CONFIG_ARCH_MX6" for boards based on mx6. Then we can choose target boards using "make ARCH=arm menuconfig" with ARCH_MX6 defined. If using original way, we have no chance to enable ARCH_MX6 when "make menuconfig". Even define CONFIG_ARCH_MX6=y in xx_defconfig, kconfig will complains "arch/../configs/platinum_titanium_defconfig:3: warning: override: TARGET_PLATINUM_TITANIUM changes choice state" Signed-off-by: NPeng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Eric Bénard <eric@eukrea.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Marek Vasut <marex@denx.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Stefan Roese <sr@denx.de> Cc: Soeren Moch <smoch@web.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Acked-by: NStefano Babic <sbabic@denx.de> Acked-by: NSoeren Moch <smoch@web.de> Acked-by: NOtavio Salvador <otavio@ossystems.com.br> Acked-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
-
由 Lucile Quirion 提交于
This commit adds basic support including: MMC, Serial console, TS4800 watchdog The config use CONFIG_SKIP_LOWLEVEL_INIT as U-boot is used as a second stage bootloader. Signed-off-by: NLucile Quirion <lucile.quirion@savoirfairelinux.com> signed-off-by: NDamien Riegel <damien.riegel@savoirfairelinux.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 vpeter4 提交于
Currently we need to build one U-boot image for each of the udoo variants: quad and dual-lite. By switching to SPL we can support all two variants with a single binary. Based on the SPL for wandboard. Tested with OpenELEC (Open Embedded Linux Entertainment Center) on both boards. Signed-off-by: NPeter Vicman <peter.vicman@gmail.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: NStefano Babic <sbabic@denx.de> Signed-off-by: NPeter Vicman <peter.vicman@gmail.com> Acked-by: NFabio Estevam <fabio.estevam@freescale.com>
-
- 30 8月, 2015 2 次提交
-
-
由 Masahiro Yamada 提交于
Device Tree really improves code maintainability and is now available for SPL too. This is the state-of-the-art implementation in U-boot. The board files (platform data) are no longer needed. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NMarek Vasut <marex@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Now UniPhier SoCs highly depend on Driver Model for SPL, too. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 19 8月, 2015 1 次提交
-
-
由 Masahiro Yamada 提交于
As we discussed a couple of times, negative CONFIG options make our life difficult; CONFIG_SYS_NO_FLASH, CONFIG_SYS_DCACHE_OFF, ... and here is another one. Now, there are three boards enabling OF_CONTROL on SPL: - socfpga_arria5_defconfig - socfpga_cyclone5_defconfig - socfpga_socrates_defconfig This commit adds CONFIG_SPL_OF_CONTROL for them and deletes CONFIG_SPL_DISABLE_OF_CONTROL from the other boards to invert the logic. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 17 8月, 2015 1 次提交
-
-
由 Thomas Abraham 提交于
Move arch/arm/cpu/armv7/exynos/* to arch/arm/mach-exynos/* to allow reuse of existing code for ARMv8 based Exynos platforms. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Reviewed-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Tested-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Acked-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 13 8月, 2015 5 次提交
-
-
由 Masahiro Yamada 提交于
Since commit a26cd049 ("arch: Make board selection choices optional"), Kconfig could create such an insane .config file that no SoC/board is selected. This is now a real problem for Buildroot, for example. (http://lists.busybox.net/pipermail/buildroot/2015-July/135125.html) This commit drops the "optional" from the ARM target select menu in favor of "Versatile family". Rationale: - Historically, Linux chose versatile_defconfig as the default of ARM defconfig. (arch/arm/Makefile of Linux describes: KBUILD_DEFCONFIG := versatile_defconfig) - It was published by ARM Ltd. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Nikita Kiryanov 提交于
Add initial support for CM-T43, an AM437x based SoM. This support includes: serial, MMC/eMMC, NAND, USB, ETH, I2C, GPIO, DRAM detection. Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
-
由 Peter Griffin 提交于
HiKey is the first 96boards consumer edition compliant board. It features a hi6220 SoC which has eight ARM A53 cpu's. This initial port adds support for: - 1) Serial 2) eMMC / SD card 3) USB 4) GPIO It has been tested with Arm Trusted Firmware running u-boot as the BL33 executable. Notes: eMMC has been tested with basic reading of eMMC partition into DDR. I have not tested writing / erasing. Due to lack of clock control it won't be running in the most performant high speed mode. SD card slot has been tested for reading and booting kernels into DDR. It is also currently configured to save the u-boot environment to the SD card. USB has been tested with ASIX networking adapter to tftpboot kernels into DDR. On v2015.07-rc2 dhcp now works, and also USB mass storage are correctly enumerated. GPIO has been tested using gpio toggle GPIO4_1-3 to flash the LEDs. Basic SoC datasheet can be found here: - https://github.com/96boards/documentation/blob/master/hikey/ Hi6220V100_Multi-Mode_Application_Processor_Function_Description.pdf Board schematic can be found here: - https://github.com/96boards/documentation/blob/master/hikey/ 96Boards-Hikey-Rev-A1.pdf Signed-off-by: NPeter Griffin <peter.griffin@linaro.org>
-
由 Linus Walleij 提交于
This switches the Integrator boards over to using the device model for its serial ports. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Vladimir Zapolskiy 提交于
The change adds SPL build support to Timll DevKit3250 board, the generated SPL image can be uploaded over UART5, JTAG or stored on NAND. SPL is designed to load U-boot image from NAND. All new NAND chip defines in board configuration are needed by SPL NAND "simple" framework, the framework is used to reduce potentially duplicated code from LPC32xx SLC NAND driver. Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>
-
- 05 8月, 2015 1 次提交
-
-
由 Hans de Goede 提交于
USB_KEYBOARD is now defined in drivers/usb/Kconfig, drop our own duplicate definition. Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
- 02 8月, 2015 1 次提交
-
-
由 Peng Fan 提交于
1. Add USDHC, I2C, UART, 74LV, USB, QSPI support. 2. Support SPL 3. CONFIG_MX6UL_14X14_EVK_EMMC_REWORK is introduced, this board default supports sd for usdhc2, but can do hardware rework to make usdhc2 support emmc. Boot Log: U-Boot SPL 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59) reading u-boot.img reading u-boot.img U-Boot 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C)CPU: Thermal invalid data, fuse: 0x0 - invalid sensor device Reset cause: POR Board: MX6UL 14x14 EVK I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: NPeng Fan <Peng.Fan@freescale.com>
-