Skip to content

U
U-Boot.Mirror

OS / U-Boot.Mirror

通知 1
Star 0
Fork 0
U
U-Boot.Mirror

体验新版 GitCode，发现更多精彩内容 >>

提交 452ef830 编写于 作者: S Simon Glass 提交者： Tom Rini
浏览文件
操作

arm: Remove vpac270_nor_128 board 

This board has not been converted to generic board by the deadline.
Remove it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
上级 6e830dfc
隐藏空白更改
内联 并排
Showing with 0 addition and 634 deletion
arch/arm/Kconfig
浏览文件 @ 452ef830
......@@ -619,11 +619,6 @@ config TARGET_PALMTREO680
select CPU_PXA
select SUPPORT_SPL
config TARGET_VPAC270
bool "Support vpac270"
select CPU_PXA
select SUPPORT_SPL
config TARGET_XAENIAX
bool "Support xaeniax"
select CPU_PXA
......@@ -785,7 +780,6 @@ source "board/timll/devkit3250/Kconfig"
source "board/toradex/colibri_pxa270/Kconfig"
source "board/toradex/colibri_vf/Kconfig"
source "board/technologic/ts4800/Kconfig"
source "board/vpac270/Kconfig"
source "board/vscom/baltos/Kconfig"
source "board/woodburn/Kconfig"
source "board/work-microwave/work_92105/Kconfig"
......
board/vpac270/Kconfig 已删除 100644 → 0
浏览文件 @ 6e830dfc
if TARGET_VPAC270
config SYS_BOARD
default "vpac270"
config SYS_CONFIG_NAME
default "vpac270"
endif
board/vpac270/MAINTAINERS 已删除 100644 → 0
浏览文件 @ 6e830dfc
VPAC270 BOARD
M: Marek Vasut <marek.vasut@gmail.com>
S: Maintained
F: board/vpac270/
F: include/configs/vpac270.h
F: configs/vpac270_nor_128_defconfig
F: configs/vpac270_nor_256_defconfig
F: configs/vpac270_ond_256_defconfig
board/vpac270/Makefile 已删除 100644 → 0
浏览文件 @ 6e830dfc
#
# Voipac PXA270 Support
#
# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
#
# SPDX-License-Identifier: GPL-2.0+
#
ifndef CONFIG_SPL_BUILD
obj-y := vpac270.o
else
obj-y := onenand.o
endif
board/vpac270/onenand.c 已删除 100644 → 0
浏览文件 @ 6e830dfc
/*
* Voipac PXA270 OneNAND SPL
*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <config.h>
#include <asm/io.h>
#include <onenand_uboot.h>
#include <asm/arch/pxa.h>
void board_init_f(unsigned long unused)
{
extern uint32_t _end;
uint32_t tmp;
asm volatile("mov %0, pc" : "=r"(tmp));
tmp >>= 24;
/* The code runs from OneNAND RAM, copy SPL to SRAM and execute it. */
if (tmp == 0) {
tmp = (uint32_t)&_end - CONFIG_SPL_TEXT_BASE;
onenand_spl_load_image(0, tmp, (void *)CONFIG_SPL_TEXT_BASE);
asm volatile("mov pc, %0" : : "r"(CONFIG_SPL_TEXT_BASE));
}
/* Hereby, the code runs from (S)RAM, copy U-Boot and execute it. */
arch_cpu_init();
pxa2xx_dram_init();
onenand_spl_load_image(CONFIG_SPL_ONENAND_LOAD_ADDR,
CONFIG_SPL_ONENAND_LOAD_SIZE,
(void *)CONFIG_SYS_TEXT_BASE);
asm volatile("mov pc, %0" : : "r"(CONFIG_SYS_TEXT_BASE));
for (;;)
;
}
void __attribute__((noreturn)) hang(void)
{
for (;;)
;
}
board/vpac270/u-boot-spl.lds 已删除 100644 → 0
浏览文件 @ 6e830dfc
/*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*
* January 2004 - Changed to support H4 device
* Copyright (c) 2004-2008 Texas Instruments
*
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_start)
SECTIONS
{
. = CONFIG_SPL_TEXT_BASE;
.text.0 :
{
*(.vectors)
arch/arm/cpu/pxa/start.o (.text*)
arch/arm/lib/built-in.o (.text*)
board/vpac270/built-in.o (.text*)
drivers/built-in.o (.text*)
}
/* Start of the rest of the SPL */
. = CONFIG_SPL_TEXT_BASE + 0x800;
.text.1 :
{
*(.text*)
}
. = ALIGN(4);
.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
. = ALIGN(4);
.data : {
*(.data*)
}
. = ALIGN(4);
__image_copy_end = .;
.rel.dyn : {
__rel_dyn_start = .;
*(.rel*)
__rel_dyn_end = .;
}
. = ALIGN(0x800);
.end :
{
*(.__end)
}
_image_binary_end = .;
.bss __rel_dyn_start (OVERLAY) : {
__bss_start = .;
*(.bss*)
. = ALIGN(4);
__bss_end = .;
}
.dynsym _image_binary_end : { *(.dynsym) }
.dynbss : { *(.dynbss) }
.dynstr : { *(.dynstr*) }
.dynamic : { *(.dynamic*) }
.hash : { *(.hash*) }
.plt : { *(.plt*) }
.interp : { *(.interp*) }
.gnu : { *(.gnu*) }
.ARM.exidx : { *(.ARM.exidx*) }
}
board/vpac270/vpac270.c 已删除 100644 → 0
浏览文件 @ 6e830dfc
/*
* Voipac PXA270 Support
*
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/hardware.h>
#include <asm/arch/regs-mmc.h>
#include <asm/arch/pxa.h>
#include <netdev.h>
#include <serial.h>
#include <asm/io.h>
#include <usb.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Miscelaneous platform dependent initialisations
*/
int board_init(void)
{
/* We have RAM, disable cache */
dcache_disable();
icache_disable();
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
/* Arch number of vpac270 */
gd->bd->bi_arch_number = MACH_TYPE_VPAC270;
/* adress of boot parameters */
gd->bd->bi_boot_params = 0xa0000100;
return 0;
}
int dram_init(void)
{
#ifndef CONFIG_ONENAND
pxa2xx_dram_init();
#endif
gd->ram_size = PHYS_SDRAM_1_SIZE;
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
#ifdef CONFIG_RAM_256M
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
#endif
}
#ifdef CONFIG_CMD_MMC
int board_mmc_init(bd_t *bis)
{
pxa_mmc_register(0);
return 0;
}
#endif
#ifdef CONFIG_CMD_USB
int board_usb_init(int index, enum usb_init_type init)
{
writel((UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
UHCHR);
writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
while (readl(UHCHR) & UHCHR_FSBIR)
;
writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
/* Clear any OTG Pin Hold */
if (readl(PSSR) & PSSR_OTGPH)
writel(readl(PSSR) | PSSR_OTGPH, PSSR);
writel(readl(UHCRHDA) & ~(0x200), UHCRHDA);
writel(readl(UHCRHDA) | 0x100, UHCRHDA);
/* Set port power control mask bits, only 3 ports. */
writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
/* enable port 2 */
writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
return 0;
}
int board_usb_cleanup(int index, enum usb_init_type init)
{
return 0;
}
void usb_board_stop(void)
{
writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
udelay(11);
writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
writel(readl(UHCCOMS) | 1, UHCCOMS);
udelay(10);
writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
return;
}
#endif
#ifdef CONFIG_DRIVER_DM9000
int board_eth_init(bd_t *bis)
{
return dm9000_initialize(bis);
}
#endif
configs/vpac270_nor_128_defconfig 已删除 100644 → 0
浏览文件 @ 6e830dfc
CONFIG_ARM=y
CONFIG_TARGET_VPAC270=y
CONFIG_SYS_EXTRA_OPTIONS="NOR,RAM_128M"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_SYS_PROMPT="$ "
configs/vpac270_nor_256_defconfig 已删除 100644 → 0
浏览文件 @ 6e830dfc
CONFIG_ARM=y
CONFIG_TARGET_VPAC270=y
CONFIG_SYS_EXTRA_OPTIONS="NOR,RAM_256M"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_SYS_PROMPT="$ "
configs/vpac270_ond_256_defconfig 已删除 100644 → 0
浏览文件 @ 6e830dfc
CONFIG_ARM=y
CONFIG_TARGET_VPAC270=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="ONENAND,RAM_256M"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_SYS_PROMPT="$ "
include/configs/vpac270.h 已删除 100644 → 0
浏览文件 @ 6e830dfc
/*
* Voipac PXA270 configuration file
*
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Board Configuration Options
*/
#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
#define CONFIG_VPAC270 1 /* Voipac PXA270 board */
#define CONFIG_SYS_TEXT_BASE 0xa0000000
#ifdef CONFIG_ONENAND
#define CONFIG_SPL_ONENAND_SUPPORT
#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x2000
#define CONFIG_SPL_ONENAND_LOAD_SIZE \
(512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
#define CONFIG_SPL_TEXT_BASE 0x5c000000
#define CONFIG_SPL_LDSCRIPT "board/vpac270/u-boot-spl.lds"
#endif
/*
* Environment settings
*/
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_MALLOC_LEN (128*1024)
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOOTCOMMAND \
"if mmc init && fatload mmc 0 0xa4000000 uImage; then " \
"bootm 0xa4000000; " \
"fi; " \
"if usb reset && fatload usb 0 0xa4000000 uImage; then " \
"bootm 0xa4000000; " \
"fi; " \
"if ide reset && fatload ide 0 0xa4000000 uImage; then " \
"bootm 0xa4000000; " \
"fi; " \
"bootm 0x60000;"
#define CONFIG_EXTRA_ENV_SETTINGS \
"update_onenand=" \
"onenand erase 0x0 0x80000 ; " \
"onenand write 0xa0000000 0x0 0x80000"
#define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200"
#define CONFIG_TIMESTAMP
#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_LZMA /* LZMA compression support */
#define CONFIG_OF_LIBFDT
/*
* Serial Console Configuration
*/
#define CONFIG_PXA_SERIAL
#define CONFIG_FFUART 1
#define CONFIG_CONS_INDEX 3
#define CONFIG_BAUDRATE 115200
/*
* Bootloader Components Configuration
*/
#define CONFIG_CMD_ENV
#define CONFIG_CMD_MMC
#define CONFIG_CMD_USB
#undef CONFIG_LCD
#define CONFIG_CMD_IDE
#ifdef CONFIG_ONENAND
#define CONFIG_CMD_ONENAND
#else
#undef CONFIG_CMD_ONENAND
#endif
/*
* Networking Configuration
* chip on the Voipac PXA270 board
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_DRIVER_DM9000 1
#define CONFIG_DM9000_BASE 0x08000300 /* CS2 */
#define DM9000_IO (CONFIG_DM9000_BASE)
#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
#define CONFIG_NET_RETRY_COUNT 10
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#endif
/*
* MMC Card Configuration
*/
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_PXA_MMC_GENERIC
#define CONFIG_SYS_MMC_BASE 0xF0000000
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
#define CONFIG_DOS_PARTITION
#endif
/*
* KGDB
*/
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */
#endif
/*
* HUSH Shell Configuration
*/
#define CONFIG_SYS_HUSH_PARSER 1
#define CONFIG_SYS_LONGHELP
#ifdef CONFIG_SYS_HUSH_PARSER
#else
#endif
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_DEVICE_NULLDEV 1
#define CONFIG_CMDLINE_EDITING 1
#define CONFIG_AUTO_COMPLETE 1
/*
* Clock Configuration
*/
#define CONFIG_SYS_CPUSPEED 0x190 /* 312MHz */
/*
* DRAM Map
*/
#define CONFIG_NR_DRAM_BANKS 2 /* 2 banks of DRAM */
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
#ifdef CONFIG_RAM_256M
#define PHYS_SDRAM_2 0x80000000 /* SDRAM Bank #2 */
#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */
#endif
#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
#ifdef CONFIG_RAM_256M
#define CONFIG_SYS_DRAM_SIZE 0x10000000 /* 256 MB DRAM */
#else
#define CONFIG_SYS_DRAM_SIZE 0x08000000 /* 128 MB DRAM */
#endif
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000
/*
* NOR FLASH
*/
#define CONFIG_SYS_MONITOR_BASE 0x0
#define CONFIG_SYS_MONITOR_LEN 0x80000
#define CONFIG_ENV_ADDR \
(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_SIZE 0x20000
#define CONFIG_ENV_SECT_SIZE 0x20000
#if defined(CONFIG_CMD_FLASH) /* NOR */
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
#ifdef CONFIG_RAM_256M
#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */
#endif
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255)
#ifdef CONFIG_RAM_256M
#define CONFIG_SYS_MAX_FLASH_BANKS 2
#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
#else
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#endif
#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
#define CONFIG_SYS_FLASH_PROTECTION 1
#define CONFIG_ENV_IS_IN_FLASH 1
#elif defined(CONFIG_CMD_ONENAND) /* OneNAND */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_ONENAND_BASE 0x00000000
#define CONFIG_ENV_IS_IN_ONENAND 1
#else /* No flash */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_IS_NOWHERE
#endif
/*
* IDE
*/
#ifdef CONFIG_CMD_IDE
#define CONFIG_LBA48
#undef CONFIG_IDE_LED
#undef CONFIG_IDE_RESET
#define __io
#define CONFIG_SYS_IDE_MAXBUS 1
#define CONFIG_SYS_IDE_MAXDEVICE 1
#define CONFIG_SYS_ATA_BASE_ADDR 0x0c000000
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0
#define CONFIG_SYS_ATA_DATA_OFFSET 0x120
#define CONFIG_SYS_ATA_REG_OFFSET 0x120
#define CONFIG_SYS_ATA_ALT_OFFSET 0x120
#define CONFIG_SYS_ATA_STRIDE 2
#endif
/*
* GPIO settings
*/
#define CONFIG_SYS_GPSR0_VAL 0x01308800
#define CONFIG_SYS_GPSR1_VAL 0x00cf0000
#define CONFIG_SYS_GPSR2_VAL 0x922ac000
#define CONFIG_SYS_GPSR3_VAL 0x0161e800
#define CONFIG_SYS_GPCR0_VAL 0x00010000
#define CONFIG_SYS_GPCR1_VAL 0x0
#define CONFIG_SYS_GPCR2_VAL 0x0
#define CONFIG_SYS_GPCR3_VAL 0x0
#define CONFIG_SYS_GPDR0_VAL 0xcbb18800
#define CONFIG_SYS_GPDR1_VAL 0xfccfa981
#define CONFIG_SYS_GPDR2_VAL 0x922affff
#define CONFIG_SYS_GPDR3_VAL 0x0161e904
#define CONFIG_SYS_GAFR0_L_VAL 0x00100000
#define CONFIG_SYS_GAFR0_U_VAL 0xa5da8510
#define CONFIG_SYS_GAFR1_L_VAL 0x6992901a
#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a0aa
#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
#define CONFIG_SYS_GAFR2_U_VAL 0x4109a401
#define CONFIG_SYS_GAFR3_L_VAL 0x54010310
#define CONFIG_SYS_GAFR3_U_VAL 0x00025401
#define CONFIG_SYS_PSSR_VAL 0x30
/*
* Clock settings
*/
#define CONFIG_SYS_CKEN 0x00500240
#define CONFIG_SYS_CCCR 0x02000290
/*
* Memory settings
*/
#define CONFIG_SYS_MSC0_VAL 0x3ffc95f9
#define CONFIG_SYS_MSC1_VAL 0x02ccf974
#define CONFIG_SYS_MSC2_VAL 0x00000000
#ifdef CONFIG_RAM_256M
#define CONFIG_SYS_MDCNFG_VAL 0x8ad30ad3
#else
#define CONFIG_SYS_MDCNFG_VAL 0x88000ad3
#endif
#define CONFIG_SYS_MDREFR_VAL 0x201fe01e
#define CONFIG_SYS_MDMRS_VAL 0x00000000
#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
#define CONFIG_SYS_SXCNFG_VAL 0x40044004
/*
* PCMCIA and CF Interfaces
*/
#define CONFIG_SYS_MECR_VAL 0x00000001
#define CONFIG_SYS_MCMEM0_VAL 0x00014307
#define CONFIG_SYS_MCMEM1_VAL 0x00014307
#define CONFIG_SYS_MCATT0_VAL 0x0001c787
#define CONFIG_SYS_MCATT1_VAL 0x0001c787
#define CONFIG_SYS_MCIO0_VAL 0x0001430f
#define CONFIG_SYS_MCIO1_VAL 0x0001430f
/*
* LCD
*/
#ifdef CONFIG_LCD
#define CONFIG_VOIPAC_LCD
#endif
/*
* USB
*/
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_BOARD_INIT
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "vpac270"
#define CONFIG_USB_STORAGE
#endif
#endif /* __CONFIG_H */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或