- 06 11月, 2019 1 次提交
-
-
由 Heiko Schocher 提交于
add DM based PCI Configuration space access support for MPC85xx PCI Bridge. This driver is based on arch/powerpc/cpu/mpc85xx/pci.c In the old driver there is a fix for a hw issue on the TARGET_MPC8555CDS and TARGET_MPC8541CDS boards. As I have no such hardware I did not port this part. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
- 05 11月, 2019 25 次提交
-
-
由 Tom Rini 提交于
With python3 we're now tripping over a long-standing problem with how we add to the buildman file with some toolchains. We cannot have multiple toolchain-alias sections as that leads to a parse error. Signed-off-by: NTom Rini <trini@konsulko.com>
-
git://git.denx.de/u-boot-fdt由 Tom Rini 提交于
Update to latest libfdt and pylibfdt, with added size control Update binman, dtoc, patman, buildman to Python 3 Update move_config, rkmux, microcode_tool to Python 3
-
由 Simon Glass 提交于
Update this tool to use Python 3 to meet the 2020 deadline. Unfortunately this introduces a test failure due to a problem in pylibfdt on Python 3. I will investigate. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Drop the now-unused Python 2 code to keep code coverage at 100%. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Some tests have crept in with Python 2 strings and constructs. Convert then. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
When preparing to possible expand or contract an entry we reset the size to the original value from the binman device-tree definition, which is often None. This causes binman to forget the original size of the entry. Remember this so that it can be used when needed. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This function should use a void * type, not char *. This causes an error: TypeError: in method 'fdt_property_stub', argument 3 of type 'char const *' Fix it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Sync up the libfdt Python bindings with upstream, commit: 430419c (tests: fix some python warnings) Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Build this swig module with Python 3. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Convert this tool to Python 3 and make it use that, to meet the 2020 deadline. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Convert this tool to Python 3 and make it use that, to meet the 2020 deadline. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Convert this tool to Python 3 and make it use that, to meet the 2020 deadline. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update this test to use Python 3 to meet the 2020 deadline. Also make it executable while we are here. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update this test to use Python 3 to meet the 2020 deadline. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Convert buildman to Python 3 and make it use that, to meet the 2020 deadline. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update this tool to use Python 3 to meet the 2020 deadline. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present patman test fail in some environments which don't use utf-8 as the default file encoding. Add this explicitly. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present all the 'command' methods return bytes. Most of the time we actually want strings, so change this. We still need to keep the internal representation as bytes since otherwise unicode strings might break over a read() boundary (e.g. 4KB), causing errors. But we can convert the end result to strings. Add a 'binary' parameter to cover the few cases where bytes are needed. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Bring over the fdt from this commit: 430419c (origin/master) tests: fix some python warnings adding in the 'assumptions' series designed to reduce code size. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This board appears to be very near its size limit and cannot accept the new checking code in libfdt. Disable this code so this the board can continue to build. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
For better or worse libfdt recent grew a lot of code that checks the validity of the device tree in great detail. When using unsigned or unverified data this makes things safer, but it does add to code size. Add some controls to select the trade-off between safety and code size. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
Unfortunately libfdt needs this value now, which is present in the stdint.h header. That file is just a placeholder in U-Boot and these sorts of constants appear in the linux/kernel.h header instead. To keep libfdt happy, add INT32_MAX too. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-imx由 Tom Rini 提交于
u-boot-imx-20191104 ------------------- - i.MX NAND: nandbcb support for MX6UL / i.MX7 - i.MX8: support for HAB - Convert to DM (opos6ul, mccmon6) - Toradex i.MX6ull colibri - sync DTS with kernel Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/606853416
-
由 Tom Rini 提交于
- Various CPSW related improvements, DTS resync
-
由 Grygorii Strashko 提交于
Conver TI CPSW driver to use dev/ofnode api. Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com> [trini: Add <dm/ofnode.h> to provide the prototype to ofnode] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 04 11月, 2019 14 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-x86由 Tom Rini 提交于
- Add support for Intel FSP-S and FSP-T in binman - Correct priority selection for image loaders for SPL - Add a size check for TPL - Various small SPL/TPL bug fixes and changes - SPI: Add support for memory-mapped flash
-
由 Tom Rini 提交于
We have once again reached a point where this board does not build in some cases with supported toolchains due to reaching a size constraint. To regain some space, disable support for Plan 9 / RTEMS images with the bootm command. Acked-by: NStefano Babic <sbabic@denx.de> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Igor Opaniuk 提交于
Add subcommand for add writing BCB only, where we provide appropriate offsets for firmware1 and firmware2 and size. Example of usage: > nandbcb bcbonly 0x00180000 0x00080000 0x00200000 Writing 1024 bytes to 0x0: randomizing OK Writing 1024 bytes to 0x20000: randomizing OK Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Tested-by: NMax Krummenacher <max.krummenacher@toradex.com> Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>
-
由 Igor Opaniuk 提交于
Move code for writing FCB/DBBT pages to a separate function Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Tested-by: NMax Krummenacher <max.krummenacher@toradex.com> Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>
-
由 Igor Opaniuk 提交于
Add support for updating FCB/DBBT on i.MX7: - additional new fields in FCB structure - Leverage hardware BCH/randomizer for writing FCB Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Tested-by: NMax Krummenacher <max.krummenacher@toradex.com> Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>
-
由 Igor Opaniuk 提交于
On i.MX7 in a sake of reducing the disturbances caused by a neighboring cells in the FCB page in the NAND chip, a randomizer is enabled when reading the FCB page by ROM bootloader. Add API for setting BCH to specific layout (and restoring it back) used by ROM bootloader to be able to burn it in a proper way to NAND using nandbcb command. Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: NAnti Sullin <anti.sullin@artecdesign.ee> Tested-by: NMax Krummenacher <max.krummenacher@toradex.com> Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>
-
由 Igor Opaniuk 提交于
Extend GPMI Integrated ECC Control Register Description, include additional defines for enabling randomizer function and providing proper randomizer type. For additional details check i.MX7 APR, section 9.6.6.3 GPMI Integrated ECC Control Register Description (GPMI_ECCCTRLn) Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Tested-by: NMax Krummenacher <max.krummenacher@toradex.com> Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>
-
由 Tom Rini 提交于
We have once again reached a point where this board does not build in some cases with supported toolchains due to reaching a size constraint. To regain some space, disable support for Plan 9 / RTEMS images with the bootm command. Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NStefano Babic <sbabic@denx.de>
-
由 Oliver Graute 提交于
Add i.MX8QM ROM 7720a1 board support Boot log as below: U-Boot 2019.10-rc3-00004-gd073e0242f (Sep 20 2019 - 08:24:13 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Advantech iMX8QM Qseven series Board: ROM-7720-A1 4GB Build: SCFW 65afe5f6 Boot: SD2 DRAM: 4 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: eth0: ethernet@5b040000Could not get PHY for FEC1: addr 1 , eth-1: ethernet@5b050000 Hit any key to stop autoboot: 0 Signed-off-by: NOliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
-
由 Peng Fan 提交于
Sync dts for i.MX8MM from Linux Kernel 5.4.0-rc1 Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Hannes Schmelzer 提交于
This commit adds support for the brppt2 board. The board is based on the i.mx6 dual-lite SoC. Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>
-
由 Anatolij Gustschin 提交于
Borrow ID reading code from Ye Li (NXP U-Boot, commit ID 5b443e3e2617) but drop imx-mkimage commit ID reading since we now use in tree mkimage. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Reviewed-by: NPeng Fan <peng.fan@nxp.com>
-
由 Ye Li 提交于
Need to pass total 5 arguments for SIP HAB call on i.MX8MQ, so update the interface to add new argument. Signed-off-by: NYe Li <ye.li@nxp.com> [agust: fixed imx8m-power-domain build] Signed-off-by: NAnatolij Gustschin <agust@denx.de> Reviewed-by: NPatrick Wildt <patrick@blueri.se> Reviewed-by: NPeng Fan <peng.fan@nxp.com>
-
由 Peng Fan 提交于
Add secure boot script, use ahab to verify image Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-