- 25 7月, 2018 7 次提交
-
-
由 Alexander Graf 提交于
The EFI image loader tries to determine which target architecture we're working with to only load PE binaries that match. So far this has worked based on CONFIG defines, because the target CPU was always indicated by a config define. With sandbox however, this is not longer true as all sandbox targets only encompass a single CONFIG option and so we need to use compiler defines to determine the CPU architecture. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Mark Kettenis 提交于
This reverts commit c524997a. Booting ARMv7 in non-secure mode using bootefi works now. Signed-off-by: NMark Kettenis <kettenis@openbsd.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Mark Kettenis 提交于
ARMV7_LPAE is required in order to enable the MMU in HYP mode. And we really want to enable the MMU in HYP mode such that we can enable the the caches. Otherwise U-Boot code (such as the EFI implementation) that runs in HYP mode will run at a snils pace. Signed-off-by: NMark Kettenis <kettenis@openbsd.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Mark Kettenis 提交于
Multiple EFI binaries may be executed in sequence. So if we already are in non-secure mode after running the first one we should skip the switching code since it no longer works once we're non-secure. Signed-off-by: NMark Kettenis <kettenis@openbsd.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Mark Kettenis 提交于
If desired (and possible) switch into HYP mode or non-secure SVC mode before calling the entry point of an EFI application. This allows U-Boot to provide a usable PSCI implementation and makes it possible to boot kernels into hypervisor mode using an EFI bootloader. Based on diffs from Heinrich Schuchardt and Alexander Graf. Signed-off-by: NMark Kettenis <kettenis@openbsd.org> [agraf: Fix indentation] Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Mark Kettenis 提交于
The current code that switches into HYP mode doesn't bother to set up a stack for HYP mode. This doesn't work for EFI applications as they expect a usable stack. Fix this by migrating the stack pointer from SP_svc to SP_hyp while in Monitor mode. This restores the stack pointer when we drop into HYP mode. Signed-off-by: NMark Kettenis <kettenis@openbsd.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
The following generated files should be ignored by git: efi_miniapp_file_image_exit.h efi_miniapp_file_image_return.h *.so files are normally deleted during the build but should be ignored too. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 24 7月, 2018 15 次提交
-
-
由 Rafał Miłecki 提交于
Our nand_ecc_modes_t is already a bit abused by value NAND_ECC_SOFT_BCH. This enum should store ECC mode only and putting algorithm details there is a bad idea. It would result in too many values impossible to support in a sane way. To solve this problem let's add a new enum. We'll have to modify all drivers to set it properly but once it's done it'll be possible to drop NAND_ECC_SOFT_BCH. That will result in a cleaner design and more possibilities like setting ECC algorithm for hardware ECC mode. Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> [Linux commit: b0fcd8ab7b3c89b5da7fff5224d06ed73e7a33cc] [Philippe Reynes: adapt code to u-boot] Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com>
-
由 Adam Ford 提交于
Only the MUSB driver is currently supported on the omap3_logic boards. The driver is using the new-musb and not the legacy version, so this patch removes the dead code references. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_DA8XX_GPIO Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
In order to use the device tree for MMC, the card-detect pin needs to be inverted. This patch places this into the am3517-evm-u-boot.dtsi file to keep the main DTS and DTSI files clean and in-sync with Linux Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
With the resync of the omap3.dtsi file, the reg-shift was removed so it breaks the UART. Adding the reg-shift into the am3517-evm-u-boot.dtsi keeps the reg-shift for U-Boot, but keeps the dts/dtsi files clean from Linux. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Mario Six 提交于
The Linux kernel moved to sphinx-based documentation and got rid of the DocBook based documentation quite a while ago. Hence, the DocBook documentation for U-Boot should be converted as well. To achieve this, import the necessary files from Linux v4.17, and convert the current DocBook documentation (three files altogether) to sphinx/reStructuredText. For now, all old DocBook documentation was merged into a single handbook, tentatively named "U-Boot Hacker Manual". For some source files, the documentation style was changed to comply with kernel-doc; no functional changes were applied. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Adam Ford 提交于
There have been some significant changes to the DM37 SOM-LV device tree. This patch re-syncs it with Linux. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
There have been some refactoring of the DTS files for the Logic PD DM37 Torpedo. This patch re-sync's the DTS files with Linux Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
There have been several minor changes to the OMAP3.dtsi, so this patch re-syncs it with Linux. An addition include/dt-binding was also brought with it. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
Several changes have been made to the AM3517-evm and the underlying am3517.dtsi file. This patch re-sync's the DTS and DTSI files with Linux. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Tom Rini 提交于
The m5253evbe board has been marked as orphan since June of 2014 and should have been dropped a while ago. Do so now. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Christophe Kerello 提交于
This patch solves quad read issue with Macronix/Micron spi nor. Signed-off-by: NChristophe Kerello <christophe.kerello@st.com> Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Christophe Kerello 提交于
This patch assigns the functional operation mode in _stm32_qspi_gen_ccr function. Signed-off-by: NChristophe Kerello <christophe.kerello@st.com> Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Heinrich Schuchardt 提交于
Assigning a parameter which is not used afterwards has not effect. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
git://git.denx.de/u-boot-imx由 Tom Rini 提交于
trini: Update colibri-imx6ull to use Kconfig for mtdparts related options. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 23 7月, 2018 18 次提交
-
-
由 Adam Ford 提交于
There are already definitions for ramdisk_addr_r and fdt_addr_r, so having a duplicate copy called ramdiskaddr and fdtaddr is confusing. This patch converts any references to ramdisk_addr_r and fdt_addr_r and removes the duplicates. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Martin Kaiser 提交于
The USBOH module on imx25 chips contains two USB controllers which are called USB OTG Controller and USB Host Controller. Each one has its EHCI root hub. The OTG Controller's EHCI registers start at offset 0, the Host Controller's registers start at offset 0x400. We set CONFIG_MXC_USB_PORT=0 to select the OTG Controller and 1 for the Host Controller. Therefore, IMX_USB_PORT_OFFSET must be 0x400. Using this setting, the Host Controller starts working on my imx25 board. Please note that the imx25 reference manual claims that the Host Controller's registers start at 0x200. This is not correct. The Linux Kernel uses the correct offset 0x400 in imx25.dtsi. Signed-off-by: NMartin Kaiser <martin@kaiser.cx> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Holger Dengler 提交于
Signing parts of a u-boot imximage for image verification in High Assurance Boot (HAB) in a post-build process, requires some information from the imximage header. Currently, this information is only provided during the image build, which makes the transfer of this information to the post-build process harder than necessary. The i.MX HAB information (start and length) can be calculated either by using information from the image-configuration file, or from the information in the flash header of the imximage. The advantage of using information from flash header is, that they are not only available during image creation, but also available if existing images are processed. Example: $ tools/mkimage -l u-boot.imx Image Type: Freescale IMX Boot Image Image Ver: 2 (i.MX53/6/7 compatible) Mode: DCD Data Size: 483328 Bytes = 472.00 KiB = 0.46 MiB Load Address: 877ff420 Entry Point: 87800000 HAB Blocks: 0x877ff400 0x00000000 0x00071c00 DCD Blocks: 0x00910000 0x0000002c 0x00000208 Signed-off-by: NHolger Dengler <dengler@linutronix.de> Tested-by: NBryan O'Donoghue <bryan.odonoghue@linaro.org>
-
由 Ludwig Zenz 提交于
In preparation for delivery bottlenecks, enable support for GigaDevice, Macronix, and Winbond nor flash chips. Signed-off-by: NLudwig Zenz <lzenz@dh-electronics.de>
-
由 Adam Ford 提交于
Since the vast majority of i.MX6 boards are migrating to SPL, this patch converts im6q_logic to SPL and enables the SDP for loading SPL and u-boot.img over USB. The Falcon mode only supports NAND flash as of now due to limited space/RAM, but all i.MX6D/Q SOM's from Logic PD have internal NAND from which to boot. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Ludwig Zenz 提交于
Support 1GIB + 2GIB DDR3 with 64bit bus width and 512MIB + 1GIB with 32bit bus width Signed-off-by: NLudwig Zenz <lzenz@dh-electronics.de>
-
由 Ludwig Zenz 提交于
Preperation for conditional DDR3 initialization based on GPIO codes. Signed-off-by: NLudwig Zenz <lzenz@dh-electronics.de>
-
由 Ludwig Zenz 提交于
This reverts commit a637fe6f. The DDR DRAM calibration was enhanced by write leveling correction code. It can be used with T-topology now. Signed-off-by: NLudwig Zenz <lzenz@dh-electronics.de>
-
由 Otavio Salvador 提交于
The new config skips the boot menu which asks which board is in use. This is useful to allow direct booting of image without user iteration. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Otavio Salvador 提交于
Our default config already has the secure mode supported, so the manual step is not required anymore. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Otavio Salvador 提交于
The DFU allows a more user friendly use as the details where the bootloader is installed are abstracted. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Otavio Salvador 提交于
This enables the "bootaux" command so a firmware can be loaded inside the M4 MCU. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Otavio Salvador 提交于
This allow the addition of extra default configurations for each baseboard, removing the boot menu when user boots for the first time. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Fabio Estevam 提交于
The addrmap5 value is the same for the 512MB and 1GB variants, so there is no need to override it. Signed-off-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Fabio Estevam 提交于
Currently the CAAM driver fails to be probed: caam 30900000.caam: Entropy delay = 3200 caam 30900000.caam: failed to acquire DECO 0 caam 30900000.caam: failed to instantiate RNG CAAM needs to be initialized in secure world, so enable CONFIG_ARMV7_BOOT_SEC_DEFAULT to allow the driver to probe successfully. Tested with kernel mainline version 4.17.2. Signed-off-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Fabio Estevam 提交于
Falcon mode boots the kernel directly from SPL, without loading the full U-Boot. As pico-imx7d does not have a GPIO for selecting Falcon versus normal mode, enter in Falcon mode when the customer selects the CONFIG_SPL_OS_BOOT option in menuconfig. Signed-off-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Otavio Salvador 提交于
Currently the baseboards do not offer a way to autodetect which one is in use, so we ask the user if no value has been set. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Fabio Berton 提交于
Add spl entry on dfu_alt_info to be able to update U-Boot with SPL for pico imx7d board. Signed-off-by: NFabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-