- 19 2月, 2019 9 次提交
-
-
由 Meenakshi Aggarwal 提交于
Flush L3 cache after uboot relocated to DDR. Signed-off-by: NMeenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: NUdit Kumar <udit.kumar@nxp.com> Reviewed-by: NStefan Roese <sr@denx.de> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Priyanka Jain 提交于
As per hardware documentation, CONFIG_SYS_FSL_PEBUF_BASE for lx2160a is 0x1c00000000 Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Jean-Jacques Hiblot 提交于
Enable CONFIG_DM_SCSI and CONFIG_BLK. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Jean-Jacques Hiblot 提交于
CONFIG_BLK can be safely enabled as DM_MMC and DM_USB are already enabled. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com> Tested-by: NVignesh R <vigneshr@ti.com>
-
由 Alexander Graf 提交于
Heinrich is going to take over maintainership of the efi_loader tree going forward. To ensure that I will still receive review mails at least, add me as reviewer with a stable email address. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Alexander Graf 提交于
Matthias Brugger agreed to take over maintainership from me for the Raspberry Pi tree. Add him to the MAINTAINERS file instead. Signed-off-by: NAlexander Graf <agraf@suse.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Hannes Schmelzer 提交于
The commit 1bac199e ("configs: Resync with savedefconfig") did remove ethernet driver from following boards defconfig: - brppt1_mmc - brppt1_nand - brppt1_spi With this commit we add ethernet and responsible phy support again. Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>
-
https://github.com/xypron2/u-boot由 Tom Rini 提交于
The patches fix multiple errors. Mentionable are: - EFI unit tests (bootefi selftest) can run on i386. - `make tests` executes the Unicode unit tests. The LoadImage patch is preparing for further rework to be delivered in v2019.07.
-
- 17 2月, 2019 5 次提交
-
-
git://git.denx.de/u-boot-video由 Tom Rini 提交于
- sunxi display DDC probe fallback - support 24bpp BMP files on 16bpp displays
-
-
由 Marek Vasut 提交于
The DT2FF register must be configured differently for HS400 mode and for HS200/SDR104 mode. Configure the DT2FF register according to the recommended datasheet settings for each mode. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
-
由 Marek Vasut 提交于
Set the HOST_MODE register WMODE bit according to the SDHI bus width, that is 0 for 64bit bus and 1 for 16/32bit bus. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
-
由 Marek Vasut 提交于
Older kernel versions or systems which do not connect eMMC reset line properly may not be able to handle situations where either the eMMC is left in HS200/HS400 mode or SD card in UHS modes by the bootloader and may misbehave. Downgrade the eMMC to HS/HS52 mode and/or SD card to non-UHS mode before booting the kernel to allow such older kernels to work with modern U-Boot. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
-
- 16 2月, 2019 26 次提交
-
-
由 Heinrich Schuchardt 提交于
If the last block in the relocation table contains only a single relocation, the current coding ignores it. Fix the determination of the end of the relocation table. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
- Add missing function descriptions. - Update existing function descriptions to match Sphinx style. - Add lib/efi_loader/efi_image_loader.c to the input files for Sphinx generated documentation. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Free resources upon failure. Correct the function description. As there is no need for any special address in the dummy memory device path passed via the EFI_LOADED_IMAGE_PROTOCOL simply use 0 as address. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
`bootefi selftest` fails on qemu-x86_defconfig if efi_selftest() is not invoked using EFI_CALL(). Likewise we call the entry point of EFI payloads with EFI_CALL(efi_start_image()). entry_count indicates if we are in U-Boot (1) or in EFI payload code (0). As we start in U-Boot code the initial value has to be 1. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Remove the duplicate code in efi_do_enter() and use efi_start_image() to start the image invoked by the bootefi command. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Up to now efi_load_pe() returns the entry point or NULL in case of an error. This does not allow to return correct error codes from LoadImage(). Let efi_load_pe() return a status code and fill in the entry point in the corresponding field of the image object. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
If we want to properly unload images in Exit() the memory should always be allocated in the same way. As we allocate memory when reading from file we should do the same when the original image is in memory. A further patch will be needed to free the memory when Exit() is called. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
In case of an error we should set the returned pointers to NULL. This ensures that an illegal free does not occur even if the caller calls free() for the handles. If protocols cannot be installed, release all resources. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
In test/py/conftest.py the assumption is made that for if a test is called with `ut unicode` the test function name starts with 'unicode_test_'. As the Unicode tests did not follow this naming scheme they were not executed by `make tests`. Rename the Unicode test functions. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Commit 0e66c10a ("lib: vsprintf: avoid overflow printing UTF16 strings") broke the Unicode unit tests: an illegal UTF16 code point should be printed as '?'. Fixes: 0e66c10a ("lib: vsprintf: avoid overflow printing UTF16 strings") Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Provide a unit test that calls LoadImage() with a file device path and executes the application via StartImage(). Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Add more comments for efi_file_from_path(). Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
If the path passed to efi_dp_split_file_path() does not contain a reference to a file it returns EFI_OUT_OF_RESOURCES. This does not properly indicate the kind of the problem that occurred. Return EFI_INVALID_PARAMETER instead. Update function description. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
In efi_selftest we are in EFI land. We cannot call U-Boot library functions malloc() and free() but should use the boot time services instead. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
In efi_selftest we are in EFI land. We should not use U-Boot library functions but boot time services for memory management. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NAlexander Graf <agraf@suse.de>
-
git://git.denx.de/u-boot-imx由 Tom Rini 提交于
u-boot-imx-2019-02-16 --------------------- - vhybrid: add calibration - gw_ventana: fixes - Improve documentation for Secure Boot (HABv4) - Fix Marvell Switch - MX6 Sabre, switch to DM - Fixes for NAND
-
git://git.denx.de/u-boot-microblaze由 Tom Rini 提交于
Xilinx changes for v2019.04-rc2 xilinx: - Start to use distro boot commands first - Setup fdtfile on ZynqMP - Move mac addr eeprom read to common location - Convert to OF_SEPARATE - Switch all board to DM_I2C - Some DT syncs i2c: - Remove !DM_I2C zynq driver versal: - Enable some more features - Add mini configurations
-
https://github.com/mbgg/u-boot由 Tom Rini 提交于
- add compute module 3+ - fix 64 bit warning in bmp command
-
由 Max Krummenacher 提交于
This makes get_imx_reset_cause() accessible in SPL, but keeps the SRSR register content intact so that U-Boot proper can evaluated the reset_cause again should this be needed. Signed-off-by: NMax Krummenacher <max.krummenacher@toradex.com> Acked-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
-
由 Max Krummenacher 提交于
If the UART is used in DTE mode the RI and DCD bits in UCR3 become irq enable bits. Both are set to enabled after reset and both likely are pending. Disable the bits to prevent an interrupt storm when Linux enables the UART interrupts. Signed-off-by: NMax Krummenacher <max.krummenacher@toradex.com> Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
-
由 Marcel Ziswiler 提交于
This fixes the following warnings: arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size): /clocks: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size): /soc/aips-bus@02100000/mipi@021e0000: unnecessary #address-cells/ #size-cells without "ranges" or child "reg" property arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size): /soc/ipu@02400000/port@2: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size): /soc/ipu@02400000/port@3: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size): /soc/ipu@02800000/port@2: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size): /soc/ipu@02800000/port@3: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
-
由 Tim Harvey 提交于
device-tree paths should never be used that reference node addresses making an assumption about leading zeros. They should not be there per the device-tree specification however they have been there until Linux 4.15 when they were removed via kernel commit 8dccafaa281aa1d240a58bbcdff338aec114a021. This fixes various issues which will occur when using Linux 4.15+ that are being fixed up on a per model per PCB revision basis such as: - enabling MMC UHS-I on board revisions that support it - enabling PWM based on hwconfig - fixing PCIe reset on GW552x - removing cpu external watchdog reset on boards that do not support it - populate PCI dt nodes based on PCI scan in order to fix GW16082 interrupt mapping and inject MAC address for PCI based GbE Signed-off-by: NTim Harvey <tharvey@gateworks.com>
-
由 Tim Harvey 提交于
The GW5904/GW5909 have a SP33E multi-protocol serial transceiver which we want to configure to RS232 by default (by de-asserting RS485_EN) Signed-off-by: NTim Harvey <tharvey@gateworks.com>
-
由 Tim Harvey 提交于
Signed-off-by: NTim Harvey <tharvey@gateworks.com>
-
由 Tim Harvey 提交于
The GW5909 is a small single board computer based on the i.MX6DL SoC with the same peripheral set as the GW5904 but with half the DRAM loaded and an additional RS232 transceiver off UART2. Signed-off-by: NTim Harvey <tharvey@gateworks.com>
-
由 Tim Harvey 提交于
The GW5908 is a small single board computer based on the i.MX6DL SoC with the same peripheral set as the GW530x but with 1GiB density DRAM (64bit 512MiB). Signed-off-by: NTim Harvey <tharvey@gateworks.com>
-