提交 ebe07ef7 编写于 作者: T Tim Harvey 提交者: Stefano Babic

imx: ventana: add support for GW5908

The GW5908 is a small single board computer based on the i.MX6DL SoC
with the same peripheral set as the GW530x but with 1GiB density DRAM
(64bit 512MiB).
Signed-off-by: NTim Harvey <tharvey@gateworks.com>
上级 00606b51
......@@ -1112,6 +1112,27 @@ struct ventana gpio_cfg[GW_UNKNOWN] = {
.wdis = IMX_GPIO_NR(7, 12),
.nand = true,
},
/* GW5908 */
{
.gpio_pads = gw53xx_gpio_pads,
.num_pads = ARRAY_SIZE(gw53xx_gpio_pads)/2,
.dio_cfg = gw53xx_dio,
.dio_num = ARRAY_SIZE(gw53xx_dio),
.leds = {
IMX_GPIO_NR(4, 6),
IMX_GPIO_NR(4, 7),
IMX_GPIO_NR(4, 15),
},
.pcie_rst = IMX_GPIO_NR(1, 29),
.mezz_pwren = IMX_GPIO_NR(2, 19),
.mezz_irq = IMX_GPIO_NR(2, 18),
.gps_shdn = IMX_GPIO_NR(1, 27),
.vidin_en = IMX_GPIO_NR(3, 31),
.wdis = IMX_GPIO_NR(7, 12),
.msata_en = GP_MSATA_SEL,
.rs232_en = GP_RS232_EN,
},
};
#define SETUP_GPIO_OUTPUT(gpio, name, level) \
......
......@@ -107,6 +107,8 @@ read_eeprom(int bus, struct ventana_board_info *info)
type = GW5906;
else if (info->model[4] == '0' && info->model[5] == '7')
type = GW5907;
else if (info->model[4] == '0' && info->model[5] == '8')
type = GW5908;
break;
}
return type;
......
......@@ -217,6 +217,46 @@ static struct mx6_mmdc_calibration mx6sdl_64x16_mmdc_calib = {
.p0_mpwrdlctl = 0x33382C31,
};
/* TODO: update with calibrated values */
static struct mx6_mmdc_calibration mx6dq_64x64_mmdc_calib = {
/* write leveling calibration determine */
.p0_mpwldectrl0 = 0x00190017,
.p0_mpwldectrl1 = 0x00140026,
.p1_mpwldectrl0 = 0x0021001C,
.p1_mpwldectrl1 = 0x0011001D,
/* Read DQS Gating calibration */
.p0_mpdgctrl0 = 0x43380347,
.p0_mpdgctrl1 = 0x433C034D,
.p1_mpdgctrl0 = 0x032C0324,
.p1_mpdgctrl1 = 0x03310232,
/* Read Calibration: DQS delay relative to DQ read access */
.p0_mprddlctl = 0x3C313539,
.p1_mprddlctl = 0x37343141,
/* Write Calibration: DQ/DM delay relative to DQS write access */
.p0_mpwrdlctl = 0x36393C39,
.p1_mpwrdlctl = 0x42344438,
};
/* TODO: update with calibrated values */
static struct mx6_mmdc_calibration mx6sdl_64x64_mmdc_calib = {
/* write leveling calibration determine */
.p0_mpwldectrl0 = 0x003C003C,
.p0_mpwldectrl1 = 0x001F002A,
.p1_mpwldectrl0 = 0x00330038,
.p1_mpwldectrl1 = 0x0022003F,
/* Read DQS Gating calibration */
.p0_mpdgctrl0 = 0x42410244,
.p0_mpdgctrl1 = 0x4234023A,
.p1_mpdgctrl0 = 0x022D022D,
.p1_mpdgctrl1 = 0x021C0228,
/* Read Calibration: DQS delay relative to DQ read access */
.p0_mprddlctl = 0x484A4C4B,
.p1_mprddlctl = 0x4B4D4E4B,
/* Write Calibration: DQ/DM delay relative to DQS write access */
.p0_mpwrdlctl = 0x33342B32,
.p1_mpwrdlctl = 0x3933332B,
};
static struct mx6_mmdc_calibration mx6dq_256x16_mmdc_calib = {
/* write leveling calibration determine */
.p0_mpwldectrl0 = 0x001B0016,
......@@ -530,6 +570,10 @@ static void spl_dram_init(int width, int size_mb, int board_model)
} else if (width == 64 && size_mb == 512) {
mem = &mt41k64m16jt_125;
debug("1gB density\n");
if (is_cpu_type(MXC_CPU_MX6Q))
calib = &mx6dq_64x64_mmdc_calib;
else
calib = &mx6sdl_64x64_mmdc_calib;
} else if (width == 64 && size_mb == 1024) {
mem = &mt41k128m16jt_125;
if (is_cpu_type(MXC_CPU_MX6Q))
......
......@@ -117,6 +117,7 @@ enum {
GW5905,
GW5906,
GW5907,
GW5908,
GW_UNKNOWN,
GW_BADCRC,
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册