- 05 3月, 2018 10 次提交
-
-
由 Masahiro Yamada 提交于
Thomas reported U-Boot failed to build host tools if libfdt-devel package is installed because tools include libfdt headers from /usr/include/ instead of using internal ones. This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.h and replaces include directives: #include <libfdt.h> -> #include <linux/libfdt.h> #include <libfdt_env.h> -> #include <linux/libfdt_env.h> Reported-by: NThomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Paul Kocialkowski 提交于
There are no headers for libfdt in lib/libfdt, as they are instead located in scripts/dtc/libfdt. Specifying lib/libfdt for headers inclusion in host tools results in using the system libfdt headers, which is not what we want. Change this to the proper path. Signed-off-by: NPaul Kocialkowski <contact@paulk.fr>
-
由 Heinrich Schuchardt 提交于
Add a comment indicating that the German key map assumes code page 437. Add support for character ² (square sign) in the German key map. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Marek Behún 提交于
Signed-off-by: NMarek Behun <marek.behun@nic.cz>
-
由 Mario Six 提交于
The PCA953x driver uses "gpio@%x_" as the GPIO bank name, where "%x" is instantiated with the I2C address of the chip. While this works, it becomes very confusing if a board has multiple PCAs with the same address on different I2C busses, and it also becomes an issue when a GPIO's value is to be set via the 'gpio' command, because this command only ever sets the value of the first device it encounters, leaving the other devices inaccessible to the command. As to not break boards that rely on this naming scheme, we introduce a new device tree string property "label" for the driver. If it exists, it is used to build a bank name of the form "%s@%x_" (where %x is still instantiated with the I2C address). If it does not exist, the legacy labeling scheme is used. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Faiz Abbas 提交于
Rename CONFIG_SPL_USBETH_SUPPORT to CONFIG_SPL_USB_ETHER. This enables users to block text using CONFIG_IS_ENABLED() instead of resorting to #if ladders with SPL and non-SPL cases. Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
-
由 Stefan Agner 提交于
Treat the first equal sign as a key/value separation too. This makes the script files compatible with mkenvimage input file format. It won't support variables with equal signs anymore, but this seems not really like a loss. Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Jeremy Boone 提交于
Ensure that the Atmel TPM driver performs sufficient validation of the length returned in the TPM response header. This patch prevents memory corruption if the header contains a length value that is larger than the destination buffer. Signed-off-by: NJeremy Boone <jeremy.boone@nccgroup.trust>
-
由 Jeremy Boone 提交于
Ensure that the Infineon I2C and SPI TPM driver performs adequate validation of the length extracted from the TPM response header. This patch prevents integer underflow when the length was too small, which could lead to memory corruption. Signed-off-by: NJeremy Boone <jeremy.boone@nccgroup.trust>
-
由 Jeremy Boone 提交于
This patch prevents integer underflow when the length was too small, which could lead to memory corruption. Signed-off-by: NJeremy Boone <jeremy.boone@nccgroup.trust>
-
- 02 3月, 2018 3 次提交
-
-
-
-
git://www.denx.de/git/u-boot-microblaze由 Tom Rini 提交于
Xilinx Kconfig changes for v2018.03 - Moving some macros to Kconfig # gpg: Signature made Thu 01 Mar 2018 10:45:58 AM EST using DSA key ID 294A0C21 # gpg: Good signature from "Michal Simek <monstr@monstr.eu>" # gpg: aka "Michal Simek (Xilinx) <michals@xilinx.com>" # gpg: aka "Michal Simek (Xilinx) <michal.simek@xilinx.com>"
-
- 01 3月, 2018 11 次提交
-
-
由 Vipul Kumar 提交于
This patch added Kconfig support for CONFIG_ZYNQ_SDHCI_MIN_FREQ and enabled it in respective defconfig. Signed-off-by: NVipul Kumar <vipulk@xilinx.com> Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Vipul Kumar 提交于
This patch added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ and enabled it in respective defconfig. Signed-off-by: NVipul Kumar <vipulk@xilinx.com> Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Vipul Kumar 提交于
This patch added Kconfig support for CONFIG_XILINX_GPIO and enabled it in respective defconfig. Signed-off-by: NVipul Kumar <vipulk@xilinx.com> Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Vipul Kumar 提交于
This patch added Kconfig support for CONFIG_ZYNQ_I2C0 and CONFIG_ZYNQ_I2C1 and enabled it in respective defconfig. Signed-off-by: NVipul Kumar <vipulk@xilinx.com> Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Vipul Kumar 提交于
This patch added Kconfig support for CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET and enabled it in respective defconfig. Signed-off-by: NVipul Kumar <vipulk@xilinx.com> Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Vipul Kumar 提交于
This patch added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SPEED and set it to default value 100000. Signed-off-by: NVipul Kumar <vipulk@xilinx.com> Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Vipul Kumar 提交于
This patch added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SLAVE and set it default to 0. Signed-off-by: NVipul Kumar <vipulk@xilinx.com> Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Vipul Kumar 提交于
This patch enabled CONFIG_SYS_I2C_ZYNQ in the respective defconfig. Signed-off-by: NVipul Kumar <vipulk@xilinx.com> Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Vipul Kumar 提交于
This patch added Kconfig support for CONFIG_SYS_I2C_ZYNQ. Signed-off-by: NVipul Kumar <vipulk@xilinx.com> Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Vipul Kumar 提交于
This patch added Kconfig support for CONFIG_FPGA_ZYNQPL and migrates the values over to the defconfigs. Signed-off-by: NVipul Kumar <vipulk@xilinx.com> Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com>
-
由 Vipul Kumar 提交于
This patch added Kconfig support for FPGA_SPARTAN3 and migrates the values over to the defconfigs. Signed-off-by: NVipul Kumar <vipulk@xilinx.com> Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com>
-
- 28 2月, 2018 7 次提交
-
-
-
由 Michal Simek 提交于
Enable networking command only when NET is enabled. And remove selecting NET for CMD_NET Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Marek Vasut 提交于
The u-boot-spl.srec is needed for the minimon update on Gen2 SoCs, conveniently generate this file if SPL is enabled. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Tom Rini <trini@konsulko.com>
-
由 Marek Vasut 提交于
The u-boot-spl.srec is needed for some platforms, add target to generate this file. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Tom Rini <trini@konsulko.com>
-
由 Masaru Nagai 提交于
The u-boot-elf.srec is needed for the minimon update on Gen3 SoCs, conveniently generate this file. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Masaru Nagai 提交于
The u-boot-elf.srec is needed for some platforms, add target to generate this file. Signed-off-by: NMasaru Nagai <masaru.nagai.vx@renesas.com> Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Chin Liang See 提交于
Enable Macronix flash support for Cyclone5 SoC Signed-off-by: NChin Liang See <chin.liang.see@intel.com>
-
- 27 2月, 2018 9 次提交
-
-
由 Arno Steffens 提交于
Signed-off-by: NArno Steffens <star@gmx.li> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Bernhard Messerklinger 提交于
Fix commit f1bcad22 ("net: e1000: add support for writing to EEPROM"). Signed-off-by: NBernhard Messerklinger <bernhard.messerklinger@br-automation.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Eugeniy Paltsev 提交于
After commit ba1f9667 ("net: designware: add clock support") we got NET broken on axs101 and axs103 platforms. Some clock don't support gating so their clock drivers don't implement .enable/.disable callbacks. In such case clk_enable returns -ENOSYS. Also some clock drivers implement .enable/.disable callbacks not for all clock IDs and return -ENOSYS (or -ENOTSUPP) for others. If we have such clock in 'clocks' list of designware ethernet controller node we fail to probe designware ethernet. Fix it. Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by: NPatrice Chotard <patrice.chotard@st.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Mario Six 提交于
Fix some style violations in the generic PHY management code. Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Fix some style violations in the MDIO command. Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Commit 68e6ecad ("net: phy: marvell 88e151x: Fix handling of RGMII interface types") fixed the initialization of 88e151x phys, but made it so that interfaces of type PHY_INTERFACE_MODE_RGMII had both RX and TX delay bits cleared. The default (like in m88e1111s_config) is to have both bits set. Hence, this patch changes the behavior in the PHY_INTERFACE_MODE_RGMII case so that both bits are set. Signed-off-by: NMario Six <mario.six@gdsys.cc> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Mario Six 提交于
Fix some style violations (mostly wrong indentions) in the Marvell PHY driver. Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
Make the tsec ethernet driver compatible with a live device tree. Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
tsec_initialize allocates a private driver structure using malloc. Should the memory allocation of this private structure fail, the function execution is aborted with a return 0, but the previously allocated device structure is never freed, hence leaked. Free the device structure in the error case. Signed-off-by: NMario Six <mario.six@gdsys.cc> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-