- 17 1月, 2008 2 次提交
-
-
由 Dave Liu 提交于
The TSEC emergency priority definition of 831x/837x is different than the definition of 834x in SPCR register. Add the other config of TSEC emergency priority into cpu_init.c Signed-off-by: NDave Liu <daveliu@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Dave Liu 提交于
The MPC8360ERDK board support patch is added before the commit 2c5b48fc so, miss clean up it. The patch clean up the miss cache config. Signed-off-by: NDave Liu <daveliu@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
- 16 1月, 2008 5 次提交
-
-
由 Anton Vorontsov 提交于
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Kyungmin Park 提交于
OneNAND: Separate U-Boot dependent code from OneNAND Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
adjust default environment; disable SCC ethernet (not used on this board). Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 14 1月, 2008 8 次提交
-
-
-
由 Dave Liu 提交于
qe.c: In function 'qe_upload_firmware': qe.c:390: warning: pointer targets in passing argument 2 uec.c: In function 'uec_initialize': uec.c:1236: warning: 'uec_info' may be used uninitialized Signed-off-by: NDave Liu <daveliu@freescale.com>
-
由 Stefan Roese 提交于
Now that bit 29 is the USB PHY reset bit, update the Kilauea port to remove the USB PHY reset after powerup. The CPLD will keep the USB PHY in reset (active low) until the bit is set to 1 in board_early_init_f(). Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 John Rigby 提交于
Signed-off-by: NJohn Rigby <jrigby@freescale.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 13 1月, 2008 16 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Michael Schwingen 提交于
Signed-off-by: NMichael Schwingen <michael@schwingen.org> Acked-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
- get rid of "version" target whichdidn't really work - make autoconf.mk depend on version_autogenerated.h to make sure to rebuild files as needed - add XECHO macro to allow for silent build using "make -s" Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Oliver Weber 提交于
Signed-off-by: NOliver Weber <almoeli@gmx.de>
-
由 Andreas Engel 提交于
Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work. This patch fixes the problem. Signed-off-by: NAndreas Engel <andreas.engel@ericsson.com>
-
由 Larry Johnson 提交于
Signed-off-by: NLarry Johnson <lrj@acm.org>
-
由 Larry Johnson 提交于
Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the "i2c sdram" command. This patch provides correct alternative interpretations when DDR2 memory is detected. Signed-off-by: NLarry Johnson <lrj@acm.org>
-
由 Wolfgang Denk 提交于
With recent toolchain versions, some boards would not build because or errors like this one (here for ocotea board when building with ELDK 4.2 beta): ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab] For many boards, the .bss section is big enough that it wraps around at the end of the address space (0xFFFFFFFF), so the problem will not be visible unless you use a 64 bit tool chain for development. On some boards however, changes to the code size (due to different optimizations) we bail out with section overlaps like above. The fix is to add the NOLOAD attribute to the .bss and .sbss sections, telling the linker that .bss does not consume any space in the image. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 12 1月, 2008 9 次提交
-
-
由 TsiChung Liew 提交于
(needed for M5475EVB) Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
-
由 Wolfgang Denk 提交于
boards. Signed-off-by: NHeiko Schocher <hs@denx.de> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Grzegorz Bernacki 提交于
Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com>
-
由 Grzegorz Bernacki 提交于
Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com>
-
由 Grzegorz Bernacki 提交于
Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Heiko Schocher 提交于
Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de>
-