- get rid of "version" target whichdidn't really work
- make autoconf.mk depend on version_autogenerated.h to make sure
  to rebuild files as needed
- add XECHO macro to allow for silent build using "make -s"
Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NOliver Weber <almoeli@gmx.de>

Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
This patch fixes the problem.
Signed-off-by: NAndreas Engel <andreas.engel@ericsson.com>

Signed-off-by: NLarry Johnson <lrj@acm.org>

Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
"i2c sdram" command.  This patch provides correct alternative
interpretations when DDR2 memory is detected.
Signed-off-by: NLarry Johnson <lrj@acm.org>

With recent toolchain versions, some boards would not build because
or errors like this one (here for ocotea board when building with
ELDK 4.2 beta):
ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]

For many boards, the .bss section is big enough that it wraps around
at the end of the address space (0xFFFFFFFF), so the problem will not
be visible unless you use a 64 bit tool chain for development. On
some boards however, changes to the code size (due to different
optimizations) we bail out with section overlaps like above.

The fix is to add the NOLOAD attribute to the .bss and .sbss
sections, telling the linker that .bss does not consume any space in
the image.
Signed-off-by: NWolfgang Denk <wd@denx.de>

(needed for M5475EVB)
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

boards.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com>

Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com>

Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NHeiko Schocher <hs@denx.de>

Signed-off-by: NHeiko Schocher <hs@denx.de>

Signed-off-by: NHeiko Schocher <hs@denx.de>

Signed-off-by: NHeiko Schocher <hs@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
isn't defined. This patch fix this.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

Signed-off-by: NHeiko Schocher <hs@denx.de>

Signed-off-by: NHeiko Schocher <hs@denx.de>

Signed-off-by: NHeiko Schocher <hs@denx.de>

Signed-off-by: NHeiko Schocher <hs@denx.de>

There were some size and unsigned problems.
Also add support for "ll" size modifier in format string like glibc
Signed-off-by: NJames Yang <James.Yang@freescale.com>
Acked-by: NJon Loeliger <jdl@freescale.com>

(1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".

(2) Use conditional Makefile.o.
Signed-off-by: NLarry Johnson <lrj@acm.org>

The TK885D board uses a TQM885D module from TQ, this port adds an
own configuration file and adds a last_stage_init() method to
configure the two PHYs, depending on the phy_auto_nego environment
variable.
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>

main.c: In function 'readline_into_buffer':
main.c:927: warning: unused variable 'p_buf'
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NRodolfo Giometti <giometti@linux.it>

Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
are not displayed correctly. This is an attempt to fix
this issue. Also add carriage return handling.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NRodolfo Giometti <giometti@linux.it>

Clear possible errors in MCSR resulting from data-eye-search.
If not done, then we could get an interrupt later on when
exceptions are enabled.
Signed-off-by: NStefan Roese <sr@denx.de>

Rework Lime support for lwmon5 using new video driver
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>

The DDR doesn't work on the 266MHz data rate,
the patch fix the bug.
Signed-off-by: NDave Liu <daveliu@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>