- 14 7月, 2019 3 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-stm由 Tom Rini 提交于
- syscon: add support for power off - stm32mp1: add op-tee config - stm32mp1: add specific commands: stboard and stm32key - add stm32 mailbox driver - solve many stm32 warnings when building with W=1 - update stm32 gpio driver
-
由 Tom Rini 提交于
- First round of TI Davinci updates - Some OMAP3 DM updates - Other misc updates
-
由 Tom Rini 提交于
This test is currently broken so disable it for now. Cc: Ramon Fried <ramon.fried@gmail.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 13 7月, 2019 24 次提交
-
-
由 Adam Ford 提交于
Since we have limited resources in SPL, it is the best interest to keep the SPL as small as possible and that includes the DTB. There are a few items in the device tree that can be removed, because these boards don't use them. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Sven Schwermer 提交于
Fixed regulators don't have a set_value method. Therefore, trying to set their value will always return -ENOSYS. Signed-off-by: NSven Schwermer <sven@svenschwermer.de> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Peng Fan <peng.fan@nxp.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heiko Schocher 提交于
add gpio-hog support. GPIO hogging is a mechanism providing automatic GPIO request and configuration as part of the gpio-controller's driver probe function. for more infos see: doc/device-tree-bindings/gpio/gpio.txt Signed-off-by: NHeiko Schocher <hs@denx.de> Tested-by: Michal Simek <michal.simek@xilinx.com> (zcu102) Tested-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Adam Ford 提交于
The MMC card-detect pin was incorrectly defined which was fixed. This patch resync's the dts and removes the u-boot specific fix. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
The da850.dtsi file had some changes. This patch pulls in the changes from Kernel 5.1.9 Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
With a recent update to the pinctrl-single driver and the fact that the da850evm has both DM and OF_CONTROL working in both SPL and U-Boot, some of the manual pinmuxing can be setup to only be activated when either the driver doesn't have DM for it, or when CONFIG_PINMUX isn't available (only during SPL). If the code ever shrinks enough to support PINCTRL in SPL, a lot of this can go away. This also remove some manual pinmuxing not needed by SPL to give SPL a little more breathing room. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
The TI Davinci (da850/l138/am1808) use pinctrl-single,bits for pinmuxing peripherals. This patch allosw the pinctrl-single driver to parse the pinctrl-single,bits options and correctly setup devices. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Tom Rini 提交于
The USE_TINY_PRINTF symbol only changes things within SPL and TPL builds, so make it depend on that support. Next, make it default as within these cases we should rarely have need of more advanced print formats outside of the debug context. To do this, in a few cases we need to correct our Kconfig dependencies as we had cases of non-SPL targets select'ing this symbol. Finally, in the case of a few boards we really do need the full printf functionality. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Keerthy 提交于
Add SPL_DM_REGULATOR configs for palmas/lp873x/lp87565. These were missing and the Makefile already assumes them to be defined. Add the corresponding SPL config options. This enables the regulator support in SPL. Signed-off-by: NKeerthy <j-keerthy@ti.com>
-
由 Keerthy 提交于
Add SPL_PMIC configs for palmas/lp873x/lp87565. These were missing and the Makefile already assumes them to be defined. Add the corresponding SPL config options. This enables the pmics in SPL. Signed-off-by: NKeerthy <j-keerthy@ti.com>
-
由 Niel Fourie 提交于
Support for Phytech phyCORE AM335x R2 SOM (PCL060) on the Phytec phyBOARD-Wega AM335x. CPU : AM335X-GP rev 2.1 Model: Phytec AM335x phyBOARD-WEGA DRAM: 256 MiB NAND: 256 MiB MMC: OMAP SD/MMC: 0 eth0: ethernet@4a100000 Working: - Eth0 - i2C - MMC/SD - NAND - UART - USB (host) Device trees were taken from Linux mainline: commit 37624b58542f ("Linux 5.1-rc7") Signed-off-by: NNiel Fourie <lusus@denx.de> Signed-off-by: NParthiban Nallathambi <pn@denx.de> Reviewed-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com> Tested-by: NMarek Vasut <marex@denx.de>
-
由 David Lechner 提交于
This converts LEGO MINDSTORMS EV3 to the driver model. MMC, SERIAL, SPI and SPI_FLASH are converted. The device tree contains only the minimal nodes required by U-Boot since the size of U-Boot is limited to 256K on this device. Signed-off-by: NDavid Lechner <david@lechnology.com>
-
由 Michael Walle 提交于
Signed-off-by: NMichael Walle <michael@walle.cc>
-
由 Derald D. Woods 提交于
This commit addresses the following warning, when _NOT_ USB_MUSB_HOST: [...] CC drivers/usb/gadget/f_mass_storage.o CC drivers/usb/musb-new/omap2430.o CC drivers/usb/gadget/f_fastboot.o CC env/common.o CC env/env.o /src/etinker/software/u-boot-master/drivers/usb/musb-new/omap2430.c: In function ‘omap2430_musb_probe’: /src/etinker/software/u-boot-master/drivers/usb/musb-new/omap2430.c:239:6: warning: assignment to ‘int’ from ‘struct musb *’ makes integer from pointer without a cast [-Wint-conversion] ret = musb_register(&platdata->plat, ^ LD drivers/usb/host/built-in.o CC drivers/usb/gadget/f_sdp.o CC fs/ext4/ext4fs.o [...] Signed-off-by: NDerald D. Woods <woods.technical@gmail.com>
-
由 Derald D. Woods 提交于
This addresses the following warning message: ===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== As USB support for older OMAP3 SoC's improves, OMAP3 EVM can be readily adapted. There is some additional 'gpio-hog' support needed to fully setup USB in a similar manner to Linux. Signed-off-by: NDerald D. Woods <woods.technical@gmail.com>
-
由 Derald D. Woods 提交于
Signed-off-by: NDerald D. Woods <woods.technical@gmail.com>
-
由 Heiko Schocher 提交于
add m41t11 support in ds1307 driver. changes: - add compatible string for m41t11 - check if RTC clock is running, if not enable the clock Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Ezequiel Garcia 提交于
When MMC_TINY is enabled, support for only one MMC device is provided. Boards that register more than one device, will just write over mmc_static keeping only the last one registered. This commit prevents this, keeping only the first MMC device created. A debug warning message is added, if nothing else, as a hint/documentation for developers. Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com>
-
由 Ezequiel Garcia 提交于
The SPL_MMC_TINY implements feature-reduced MMC support on SPL, and as such, it's more consistent and convenient to find it as part of the SPL configuration. Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com>
-
由 Leo Ruan 提交于
Add sub-command 'env info' to display environment information: - env_valid : is environment valid - env_ready : is environment imported into hash table - env_use_default : is default environment using This command can be optionally used for evaluation in scripts: [-d] : evaluate whether default environment is used [-p] : evaluate whether environment can be persisted The result of multiple evaluations will be combined with AND. Signed-off-by: NLeo Ruan <tingquan.ruan@cn.bosch.com> Signed-off-by: NMark Jonas <mark.jonas@de.bosch.com> Reviewed-by: NSimon Glass <sjg@chromium.org> [trini: Do not enable by default] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Peng Fan 提交于
`if (!strncmp(dev->name, name, strlen(name)))` might find out the wrong device, it might find out `dram_pll_ref_sel`, when name is `dram_pll`. So use strcmp to avoid such issue. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Peng Fan 提交于
"keyb" is not the real device name, "keyb@3" is. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Peng Fan 提交于
"adc" is not the real device name, "adc@0" is. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Marek Behún 提交于
Use the uclass_first_device_check and uclass_next_device_check functions instead of uclass_first_device and uclass_next_device in pci_init. This ensures that all PCI devices are tried to be probed. Currently if a device fails to probe, the enumeration stops and the devices which come after the failed device are not probed. Signed-off-by: NMarek Behún <marek.behun@nic.cz> Cc: Stefan Roese <sr@denx.de> Cc: Anton Schubert <anton.schubert@gmx.de> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Mario Six <mario.six@gdsys.cc> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Phil Sutter <phil@nwl.cc> Cc: VlaoMao <vlaomao@gmail.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: NStefan Roese <sr@denx.de> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 12 7月, 2019 13 次提交
-
-
由 Ilko Iliev 提交于
Convert the board to support the USB and video driver model and remove the unnecessary code.
-
由 Ilko Iliev 提交于
Convert the board to support the USB and video driver model and remove the unnecessary code.
-
由 Patrice Chotard 提交于
This fixes the following error message: U-Boot 2019.07-rc4-00103-g5eea874b (Jun 25 2019 - 15:09:31 +0200) DRAM: 8 MiB gpio@40021800: dir_output: error: gpio GPIOG14 not reserved gpio@40021800: dir_output: error: gpio GPIOG13 not reserved gpio@40021800: set_value: error: gpio GPIOG14 not reserved Flash: 2 MiB .... Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
As compatible string "st,stm32-gpio" is no more used, .ofmatch callback becomes useless, remove it. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrice Chotard 提交于
Since pinctrl_stm32 driver update, each gpio bank is now binded by pinctrl driver. The compatible string "st,stm32-gpio" becomes useless, remove it. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrice Chotard 提交于
Update .bind callback in order to bind all pinctrl subnodes with "gpio-controller" property to gpio_stm32 driver. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrice Chotard 提交于
As this driver is used on stm32f4/f7/h7 and stm32mp1 SoCs, rename it with a more generic name. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
This patch solves the following warnings: drivers/spi/stm32_spi.c: In function 'stm32_spi_write_txfifo': drivers/spi/stm32_spi.c:116:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (priv->tx_len >= sizeof(u32) && ^~ drivers/spi/stm32_spi.c:122:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] } else if (priv->tx_len >= sizeof(u16) && ^~ drivers/spi/stm32_spi.c: In function 'stm32_spi_read_rxfifo': drivers/spi/stm32_spi.c:150:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] (priv->rx_len >= sizeof(u32) || (sr & SPI_SR_RXWNE))) { ^~ drivers/spi/stm32_spi.c:156:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] (priv->rx_len >= sizeof(u16) || ^~ drivers/core/simple-bus.c:15:12: warning: no previous prototype for 'simple_bus_translate' [-Wmissing-prototypes] fdt_addr_t simple_bus_translate(struct udevice *dev, fdt_addr_t addr) ^~~~~~~~~~~~~~~~~~~~ drivers/spi/stm32_spi.c: In function 'stm32_spi_set_speed': drivers/spi/stm32_spi.c:335:10: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] div > STM32_MBR_DIV_MAX) ^ drivers/spi/stm32_spi.c:344:19: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if ((mbrdiv - 1) < 0) ^ drivers/spi/stm32_spi.c: In function 'stm32_spi_probe': drivers/spi/stm32_spi.c:531:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] for (i = 0; i < ARRAY_SIZE(priv->cs_gpios); i++) { ^ Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
This patch solves the following warnings: cmd/pinmux.c: In function 'do_dev': cmd/pinmux.c:26:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (ret) { ^ cmd/pinmux.c:30:2: note: here case 1: ^~~~ Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
This patch solves warnings detected by setting W=1 when building. Warnings type detected: - [-Wtype-limits] - [-Wsign-compare] Signed-off-by: NChristophe Kerello <christophe.kerello@st.com> Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
This patch solves warnings detected by setting W=1 when building. Warnings type detected: - [-Wsign-compare] - [-Wtype-limits] Signed-off-by: NChristophe Kerello <christophe.kerello@st.com> Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
This patch solves the following warnings: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
This patch solves the following warnings: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if (*idx < 0) ^ drivers/pinctrl/pinctrl_stm32.c: At top level: warning: no previous prototype for 'stm32_pinctrl_probe' [-Wmissing-prototypes] int stm32_pinctrl_probe(struct udevice *dev) ^~~~~~~~~~~~~~~~~~~ Signed-off-by: NPatrice CHOTARD <patrice.chotard@st.com> Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-