This patch adds QSPI boot support for LS2080AQDS board.
The QSPI boot image need to be programmed into the QSPI flash
first. Then we can switch to booting from QSPI memory space.
Signed-off-by: NYuan Yao <yao.yuan@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Signed-off-by: NYuan Yao <yao.yuan@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Signed-off-by: NYuan Yao <yao.yuan@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Enable QSPI flash related configure options.
Signed-off-by: NYuan Yao <yao.yuan@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

When QSPI is enabled, NOR flash and QIXIS can't be accessed
through IFC due to pin mux. Enable I2C QIXIS access and I2C
early init to read the sysclk and ddrclk.
Signed-off-by: NYuan Yao <yao.yuan@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Create an entry for "config USB_XHCI_DWC3" in Kconfig and
switch over to it for all boards.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Move CONFIG_USB_XHCI to defconfig files for all boards, renaming it
into CONFIG_USB_XHCI_HCD.

As commented in the help of "config USB_XHCI" entry, this has been
a TODO for a long time; now CONFIG_USB_XHCI_HCD and CONFIG_USB_XHCI
have been unified in favor of the former.

Note:
Some boards define CONFIG_USB_XHCI in their headers without
CONFIG_USB, which does not meet the "depends on" in Kconfig.
I added CONFIG_USB=y for those boards when converting.
Otherwise, they would fail to build.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

As per new PHY framework, DPNI naming convetion is no more used.
Use new naming convention.
Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

This option currently enables both the command and the SCSI functionality.
Rename the existing option to CONFIG_SCSI since most of the code relates
to the feature.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Update the config.h and defconfig files for the commands that 8e3c036
converted over to Kconfig
Signed-off-by: NTom Rini <trini@konsulko.com>

A number of moveconfig.py runs have left a instances of multiple empty
lines in a row.  Correct this to a single empty line.
Signed-off-by: NTom Rini <trini@konsulko.com>

This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND.  Due to how we have used this historically
we need to take further care here when converting.
Signed-off-by: NTom Rini <trini@konsulko.com>

Sec_init has been called at the beginning to initialize SEC Block
(CAAM) which is used by secure boot validation later for both ls2080a
qds and rdb. 64-bit address in ESBC Header has been enabled. Secure
boot defconfigs are created for boards (NOR boot).
Signed-off-by: NSaksham Jain <saksham.jain@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Define mcinitcmd env variable to load Management complex during
u-boot boot sequence.
Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

kernel_size env variable is defined as 0x28000000, it is beyond NOR
flash range. Update kernel_size with 40MB kernel size.
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Freescale ARM-based Layerscape contains a SATA controller
which comply with the serial ATA 3.0 specification and the
AHCI 1.3 specification.
This patch adds SATA feature on ls2080aqds, ls2080ardb and
ls1043aqds boards.
Signed-off-by: NTang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP
personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc.
So renaming existing LS2085A code base to reflect LS2080A (Prime personality)
Signed-off-by: NPratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com>
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
[York Sun: Dropped #ifdef in cpu.c for cpu_type_list]
Reviewed-by: NYork Sun <yorksun@freescale.com>

Management complex Firmware, DPL and DPC are depolyed during u-boot boot
sequence.

Add new DPAA2 commands to manage Management Complex (MC) i.e. start mc, aiop
and apply DPL from u-boot command prompt.
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

There are already Kconfig options for SPI flash drivers, but we
have not moved them from config.h to defconfig files. This commit
does this in a batch.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

For most PPC platforms, they will call the first get_clocks() in
init_sequence_f[] as they define CONFIG_PPC. CONFIG_SYS_FSL_CLK is
then defined to call the second get_clocks(), which should be
redundant for PPC.
Signed-off-by: NGong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

get_clocks() should not be limited by ESDHC.
Signed-off-by: NGong Qianyu <Qianyu.Gong@freescale.com>

The X-QSGMII-16PORT is a 4xQSGMII/8xSGMII riser card with eighth SerDes
interfaces implemented in PCIe form factor board.
It supports followings
 - Card can operate with up to 4 QSGMII lane simultaneously
 - Card can operate with up to 8 SGMII lane simultaneously

Add support of X-QSGMII-16PORT riser card.
This patch also take care of back-ward compatiblity with old SGMII rise cards
used on LS2085QDS Platform.
Signed-off-by: NKing Chung Lo@freescale.com <KingChungLo@freescale.com>
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Move config for the E1000 Ethernet driver to Kconfig and tidy up affected
boards.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

Add USB XHCI support for ls2085qds platform
Signed-off-by: NNikhil Badola <nikhil.badola@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Enable DSPI flash related configurations.
Signed-off-by: NHaikun Wang <haikun.wang@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Linux itb image size has been increased from 30MB.

So updating kernel_size to 40MB in env variable.
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Load AIOP image from NOR flash into DDR so that the MC firmware
the MC fw can start it at boot time
Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com>
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

LS2085A supports 6 personalities i.e. LS2045AE, LS2045A, LS2080AE,
LS2080A, LS2085AE and LS2085A personlities.

Instead of hard-coding, board name should change as per selected
personality.

Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Increases the kernel size supported for LS2085A platforms:-
 - Update environment variables
 - Add ramdisk_size in bootargs env variable
 - Define  CONFIG_SYS_BOOTM_LEN to 64MB

Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Enable "date" command for QDS and RDB boards

Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: NTom Rini <trini@konsulko.com>

CONFIG_NET_MULTI is not used anywhere and thus can safely be removed
from the configs.
Acked-by: NMarek Vasut <marex@denx.de>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NLars Poeschel <poeschel@lemonage.de>

This also selects CONFIG_NET for any CONFIG_CMD_NET board.

Remove the imx default for CONFIG_NET.

This moves the config that was defined by 60296a83 (commands: add more
command entries in Kconfig).
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

This patch adds esdhc support for ls2085a.
Signed-off-by: NYangbo Lu <yangbo.lu@freescale.com>
Signed-off-by: NYork Sun <yorksun@freescale.com>

This adds NAND boot support for LS2085AQDS, using SPL framework.
Details of forming NAND image can be found in README.
Signed-off-by: NScott Wood <scottwood@freescale.com>
[York Sun: Remove +S from defconfig after commit 252ed872]
Signed-off-by: NYork Sun <yorksun@freescale.com>

Add support of ethernet:
 - eth.c: mapping lane to slot for (0x2A, 0x07)
 - ls2085a.c: To enable/disable dpmac and get link type
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: NYork Sun <yorksun@freescale.com>

The LS2085AQDS is an evaluatoin platform that supports the LS2085A
family SoCs. This patch add basic support of the platform.
Signed-off-by: NYork Sun <yorksun@freescale.com>
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: NBhupesh Sharma <bhupesh.sharma@freescale.com>