- 04 3月, 2014 10 次提交
-
-
由 Masahiro Yamada 提交于
board/sheldon/simpc8313/config.mk is used only for nand_spl. So it should go into nand_spl/board/sheldon/simpc8313/. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
LDSCRIPT_MAKEFILE_DIR is not referenced from anywhere. Remove. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This variable was abolished by Kbuild series. I forgot to delete it. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
$(call if_changed,...) must take FORCE as a prerequite. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Michal Simek 提交于
Add console selection from DTB which is enough to have OF driven solution. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Read ram size directly from DTB. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Enable initialize sdhci from DTB. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Gem can be directly initialized from DTB. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Disable CONFIG_OF_CONTROL for SPL compilation. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
- Add xilinx_emaclite_of_init to netdev.h - Remove global data pointer from the driver - Add better handling for error state. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 27 2月, 2014 6 次提交
-
-
git://git.denx.de/u-boot-arm由 Tom Rini 提交于
Conflicts: arch/arm/cpu/armv7/config.mk board/ti/am43xx/mux.c include/configs/am43xx_evm.h Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
When we tell the compiler to optimize for ARMv7 (and ARMv6 for that matter) it assumes a default of SCTRL.A being cleared and unaligned accesses being allowed and fast at the hardware level. We set this bit and must pass along -mno-unaligned-access so that the compiler will still breakdown accesses and not trigger a data abort. To better help understand the requirements of the project with respect to unaligned memory access, the Documentation/unaligned-memory-access.txt file has been added as doc/README.unaligned-memory-access.txt and is taken from the v3.14-rc1 tag of the kernel. Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Mans Rullgard <mans@mansr.com> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
While there are valid reasons to use __packed, often the answer is that you should be doing something else here instead. Signed-off-by: NTom Rini <trini@ti.com>
-
由 Albert ARIBAUD 提交于
Remove the last uses of symbol offsets in ARM U-Boot. Remove some needless uses of _TEXT_BASE. Remove all _TEXT_BASE definitions. Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Albert ARIBAUD 提交于
This prevents references to _end from generating absolute relocation records. This change is binary invariant for ARM targets. Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Albert ARIBAUD 提交于
Newly added cm_t335 was missed in commit 47ed5dd0 which made ARM targets produce full ELF files. Fix its linker script. This change is binary-invariant when only .dynsym, .dynstr, .dynamic, .plt, .interp and .gun sections are declared. Sections .hash, .got.plt, .dynbss and .ARM.exidx are also declared so that their (unused) content is moved out of the u-boot binary. Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>
-
- 26 2月, 2014 21 次提交
-
-
由 Tom Rini 提交于
This reverts commit fc0fc50f. The author has asked on the mailing list that we revert this for now as it breaks write support. Reported-by: NŁukasz Majewski <l.majewski@samsung.com> Signed-off-by: NTom Rini <trini@ti.com>
-
git://git.denx.de/u-boot-mpc85xx由 Tom Rini 提交于
With this, fixup a trivial build error of get_effective_memsize needing to be updated in the new board/freescale/p1010rdb/spl.c Signed-off-by: NTom Rini <trini@ti.com>
-
由 Masahiro Yamada 提交于
arch/arm/cpu/armv7/omap-common/config.mk is never included because "omap-common" is not SoC name. If we want to add OMAP-specific compiler flags, they must be added to omap3/config.mk, omap4/config.mk, omap5/config.mk. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com>
-
由 Masahiro Yamada 提交于
Same as the previous commit. Move sanity check to prepare1 target to avoid nasty troubles. Before this commit, LDSCRIPT existence was not checked when it was specified by CONFIG_SYS_LDSCRIPT. Now LDSCRIPT existence is checked for all boards. $(wildcard $(LDSCRIPT)) must point to the linker scripts with absolute path. Otherwise, make will terminate with a false error on out-of-tree build. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Before this commit, make terminated with an error where is shouldn't under some condition. This bug happened when we built a board unsupporting generic board right after building with generic board. For example, the following sequence failed. (harmony uses generic board but microblaze-generic does not support it) $ make harmony_config Configuring for harmony board... $ make CROSS_COMPILE=arm-linux-gnueabi- [ Build succeed ] $ make microblaze-generic_config Configuring for microblaze-generic board... $ make CROSS_COMPILE=microblaze-linux- Makefile:488: *** Your architecture does not support generic board. Please undefined CONFIG_SYS_GENERIC_BOARD in your board config file. Stop. We had to do "make clean" before building the microblaze board. This commit fixes this unconvenience. Move generic board sanity check to "prepare1" target, which is run after generation of include/autoconf.mk. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Commit 6ab6b2af deleted ./u-boot.dtb because it was a copy of dts/dt.dtb. But Simon suggested to keep u-boot.dtb at the top directory because it is a build output. After discussions, we agreed on revival of ./u-boot.dtb. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@ti.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
"help" target has been copied from Linux 3.13 and adjusted for U-Boot. Unlike Linux, cleaning is done on 4 levels: clean, clobber, mrproper, distclean. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Import build rules of single targets from Linux 3.13. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This commit avoids generating ./SPL twice. - Fist time descending to spl/ - Second time as a prerequisite of u-boot-with-spl.imx, u-boot-with-nand-spl.imx. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Move sandbox-specific link rule to arch/sandbox/config.mk. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Rename OBJCFLAGS to OBJCOPYFLAGS beforehand to use "cmd_objcopy" in scripts/Makefile.lib in an upcoming commit. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Generate include/generated/generic-asm-offsets.h and include/generated/asm-offsets.h in ./Kbuild. This commit also changes the include guard. Before this commit, __ASM_OFFSETS_H__ was used for both of them. So we could not include generic-asm-offsets.h and asm-offsets.h at the same time. This commit renames the include guard of the former to __GENERIC_ASM_OFFSETS_H__. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This commit moves include/generated/{generic-asm-offsets.h, asm-offsets.h} from "depend" targets to "prepare" targets and deletes "depend" targets. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
- Generate include/generated/{timestamp.h, version.h} more simply by using filechk rule. - Add $(UBOOTRELEASE) variable and re-write u-boot.imx rule more simply. - Rename U_BOOT_VERSION in Makefile to UBOOTVERSION Before this commit, the same variable name, "U_BOOT_VERSION" was used for two different strings. One of them was defined in Makefile. It takes the form like "2014.01-rc1" and used in makefiles and script files. The other is defined in include/generated/version.h It takes the form like "U-Boot 2014.01-rc1-00010-gbe6d4266-dirty" and used in C and Aseembler. It is confusing when grepping the source tree. So, this commit renames the former to UBOOTVERSION. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 25 2月, 2014 3 次提交
-
-
由 Masahiro Yamada 提交于
If -fstack-usage option is given to crosstools that do not support it, gcc displays a warning message but still exits with status 0. This means we can not rely on $(call cc-option,...) to detect if -fstack-usage option is supported or not. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Nikhil Badola 提交于
Use first four characters for phy_type comparison. Strcmp() should not be used to check the phy_type string which maybe parsed by hwconfig_subarg(). Hwconfig_subarg() returns part of hwconfig string starting from phy_type value till the end of the string. Since phy_type could be either "utmi" or "ulpi", strncmp() should be used so that a comparison of "utmi;fsl_ddr:bank_intlv=auto" with "utmi" will succeed. Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: NNikhil Badola <nikhil.badola@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Haijun.Zhang 提交于
u-boot binary size for Freescale mpc8536DS platforms is 512KB. This has been reached to upper limit of the platforms and causig linker error. So increase the u-boot binary size to 768KB. Signed-off-by: NHaijun Zhang <Haijun.Zhang@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-