Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Compute DIMM parameters based upon the SPD information.
Signed-off-by: NJames Yang <James.Yang@freescale.com>
Signed-off-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Compute DIMM parameters based upon the SPD information in spd.
Signed-off-by: NJames Yang <James.Yang@freescale.com>
Signed-off-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The main purpose of this rewrite it to be able to share the same
initialization code on all FSL PowerPC products that have DDR
controllers.  (83xx, 85xx, 86xx).

The code is broken up into the following steps:
	GET_SPD
	COMPUTE_DIMM_PARMS
	COMPUTE_COMMON_PARMS
	GATHER_OPTS
	ASSIGN_ADDRESSES
	COMPUTE_REGS
	PROGRAM_REGS

This allows us to share more code an easily allow for board specific code
overrides.

Additionally this code base adds support for >4G of DDR and provides a
foundation for supporting interleaving on processors with more than one
controller.
Signed-off-by: NJames Yang <James.Yang@freescale.com>
Signed-off-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Signed-off-by: NEd Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Provide a helper function that will setup the last available
LAWs (upto 2) for DDR.  Useful for SPD/dyanmic DDR setting code.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Also adds helper functions for DDR1/2 to verify the checksum.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NHeiko Schocher <hs@denx.de>

- Remove unused global variable os_data_count.
- Remove unused variable z.
Signed-off-by: NGururaja Hebbar <gururajakr@sanyo.co.in>

MVS1 board has reached end-of-life and can be removed completely.
Signed-off-by: NAndre Schwarz <andre.schwarz@matrix-vision.de>

There is no need for each OS specific function to call do_reset() we
can just do it once in bootm. This means its feasible on an error for
the OS boot function to return.

Also, remove passing in cmd_tbl_t as its not needed by the OS boot
functions.  flag isn't currently used but might be in the future so
we left it alone.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Resize the fdt to size + padding to 4k boundary
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Created a new fdt_initrd() to deal with setting the initrd properties
in the device tree and fixing up the mem reserve.  We can use this
both in the choosen node handling and lets us remove some duplicated
code when we fixup the initrd info in bootm on PPC.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Move the fdt resizing code out of ppc specific boot code and into
common fdt support code.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Created a bootm_start() that handles the parsing and detection of all
the images that will be used by the bootm command (OS, ramdisk, fdt).
As part of this we now tract all the relevant image offsets in the
bootm_headers_t struct. This will allow us to have all the needed
state for future sub-commands and lets us reduce a bit of arch
specific code on SPARC.

Created a bootm_load_os() that deals with decompression and loading
the OS image.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

To allow for persistent state between future bootm subcommands we
need the lmb to exist in a global state.
Moving it into the bootm_headers_t allows us to do that.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Set the fdt working address so "fdt FOO" commands can be used as part
of the bootm flow.  Also set an the environment variable "fdtaddr"
with the value.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Move the code that handles finding a device tree blob and relocating
it (if needed) into common code so all arch's have access to it.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Move determing if we have a ramdisk and where its located into the
common code. Keep track of the ramdisk start and end in the
bootm_headers_t image struct.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Move entry point code out of each arch and into common code.
Keep the entry point in the bootm_headers_t images struct.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

PCI I/O space is currently mapped 1:1 at 0xFA000000. Linux requires
PCI I/O space to start at 0 on the PCI bus. This patch maps PCI I/O
space such that 0xFA000000 in the processor's address space maps to 0
on the PCI I/O bus.

Signed-off-by Randy Vinson <rvinson@mvista.com>
Acked-by: NRoy Zang <tie-fei.zang@freescale.com>

Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
Signed-off-by: NWolfgang Denk <wd@denx.de>

Use the same mapping in flash as used by Linux
Signed-off-by: NWolfgang Denk <wd@denx.de>

Bug was introced by "Big white-space cleanup" (53677ef1)
Signed-off-by: NWolfgang Denk <wd@denx.de>

fix mvBL-M7 config and move to matrix_vision subdir
Signed-off-by: NAndre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

This patch adds elements to the 83xx sysconf structure and #define values that are used
by mpc83xx family devices.
Signed-off-by: NNick Spence <nick.spence@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a
PCI card rather than a host computer.
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

This adds a helper function to unlock the PCI configuration bit, so that
any extra PCI setup (such as outbound windows, etc.) can be done after
using the 83XX_GENERIC_PCI code to set up the PCI bus.
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

Change the MPC8349EMDS board to use the generic PCI initialization code
for the mpc83xx cpu.
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

Signed-off-by: NWolfgang Denk <wd@denx.de>

This "||" doesn't seem to work. Now using the idea suggest by Scott Wood
to combine both config options into one line. This even allows defining
both options and not generating the target object twice.
Signed-off-by: NStefan Roese <sr@denx.de>

Bits MPCTL[MFN] and MPCTL[MFD] were not fully covered.
Signed-off-by: NJens Gehrlein <sew_s@tqs.de>

 - According to ARM Dual-Timer Module (SP804) TRM (ARM DDI0271),
   -- Timer Value Register @ TIMER Base + 4 is Read-only.
   -- Prescale Value (Bits 3-2 of TIMER Control register)
	can only be one of 00,01,10. 11 is undefined.
   -- CFG_HZ for Versatile board is set to
	#define CFG_HZ		(1000000 / 256)
	So Prescale bits is set to indicate
	- 8 Stages of Prescale, Clock divided by 256
 - The Timer Control Register has one Undefined/Shouldn't Use Bit
   So we should do read/modify/write Operation
Signed-off-by: NGururaja Hebbar <gururajakr@sanyo.co.in>