- 28 12月, 2021 9 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_JFFS2_DEV CONFIG_JFFS2_LZO CONFIG_JFFS2_NAND CONFIG_JFFS2_PART_OFFSET CONFIG_JFFS2_PART_SIZE Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_KIRKWOOD_GPIO Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_KWD_CONFIG Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_88F5182 CONFIG_BOARD_IS_OPENRD_BASE CONFIG_BOARD_IS_OPENRD_CLIENT CONFIG_BOARD_IS_OPENRD_ULTIMATE CONFIG_D2NET_V2 CONFIG_FEROCEON CONFIG_FEROCEON_88FR131 CONFIG_INETSPACE_V2 CONFIG_KW88F6192 CONFIG_KW88F6281 CONFIG_KW88F6702 CONFIG_NET2BIG_V2 CONFIG_NETSPACE_LITE_V2 CONFIG_NETSPACE_MAX_V2 CONFIG_NETSPACE_MINI_V2 CONFIG_NETSPACE_V2 CONFIG_SHEEVA_88SV131 At this point mv-plug-common.h is now only an include of mv-common.h so remove that indirection. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
There are a number of symbols that are never defined, only referenced in code imported from the Linux kernel or similar. Drop them from the list. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_CPU_SH7751 Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_CPU_PXA27X Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_83XX_PCICLK Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_TEGRA_NAND Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 27 12月, 2021 1 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SD_BOOT CONFIG_SD_BOOT_QSPI Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 18 12月, 2021 1 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_PHYSMEM Signed-off-by: NSimon Glass <sjg@chromium.org> Suggested-by: NSean Anderson <seanga2@gmail.com>
-
- 06 12月, 2021 4 次提交
-
-
由 Simon Glass 提交于
CONFIG_SYS_ATA_PORT_ADDR is not used in the code anymore. Drop it and use ATA_PORT_ADDR() locally instead. Drop CONFIG_IDE_RESET_ROUTINE and CONFIG_IDE_SWAP_IO which are also unused. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_KEYBOARD Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_SYS_FDT_LOAD_ADDR Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This can go in the related header file. Drop the CONFIG option. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
- 02 12月, 2021 1 次提交
-
-
由 Patrick Delaunay 提交于
The helper macro CONFIG_IS_ENABLED and CONFIG_VAL are not real configurations and they are no more present in u-boot.cfg so they can be removed in config_whitelist.txt. Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 30 11月, 2021 1 次提交
-
-
由 Patrick Delaunay 提交于
This converts the following to Kconfig: CONFIG_LCD_DT_SIMPLEFB This patch also renames this config to CONFIG_FDT_SIMPLEFB as the code in common/lcd_simplefb.c support CONFIG_LCD and CONFIG_VIDEO. Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NMatthias Brugger <mbrugger@suse.com>
-
- 13 11月, 2021 2 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This symbol has been functionally dead for a long time. Remove the last and recent re-introductions of setting it, and update the whitelist so it will not be re-introduced again. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 12 11月, 2021 1 次提交
-
-
由 Thomas Huth 提交于
The last board that used to set CONFIG_LYNXKDI has been removed in commit 242836a8 ("powerpc: ppc4xx: remove pcs440ep support"), doc/README.lynxkdi only talks about a MPC8260 board being supported, and the mpc8260 support has been removed four years ago in commit 2eb48ff7 ("powerpc, 8260: remove support for mpc8260") already, and common/lynxkdi.c only consists of an "#error" statement these days, so it seems like the LYNX KDI code is dead code nowadays. Let's remove it now. Signed-off-by: NThomas Huth <thuth@redhat.com>
-
- 09 11月, 2021 1 次提交
-
-
由 Rajesh Bhagat 提交于
Use moveconfig.py script to convert CONFIG_SYS_FMAN_FW_ADDR, CONFIG_SYS_QE_FW_ADDR and CONFIG_SYS_QE_FMAN_FW_LENGTH to Kconfig and move these entries to defconfigs. Signed-off-by: NRajesh Bhagat <rajesh.bhagat@nxp.com> [Rebased] Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
- 05 11月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 01 11月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 21 10月, 2021 1 次提交
-
-
由 Marek Behún 提交于
Move the config option CONFIG_I2C_MV to a Kconfig option CONFIG_SYS_I2C_MV and move the default definition from config header files into defconfigs. Signed-off-by: NMarek Behún <marek.behun@nic.cz> Reviewed-by: NStefan Roese <sr@denx.de>
-
- 15 10月, 2021 10 次提交
-
-
由 Tom Rini 提交于
Resync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Marek Behún 提交于
On mvebu this is defined if and only if !ARM64. Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300). Signed-off-by: NMarek Behún <marek.behun@nic.cz>
-
由 Marek Behún 提交于
This config option doesn't do anything. nas220 uses USB_EHCI_MARVELL. Signed-off-by: NMarek Behún <marek.behun@nic.cz>
-
由 Marek Behún 提交于
This option is only used for mx23evk_defconfig mx23_olinuxino_defconfig which are the only i.MX23 boards. Add depend on ARCH_MX23 and default to y. Signed-off-by: NMarek Behún <marek.behun@nic.cz>
-
由 Marek Behún 提交于
In preparation for moving this option to Kconfig, rename it to be consistent with other USB EHCI Kconfig options. Signed-off-by: NMarek Behún <marek.behun@nic.cz>
-
由 Patrick Delaunay 提交于
Remove the latest reference of CONFIG_CONS_NONE in code Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
Remove the latest reference of CONFIG_SYS_FLASH_AMD_CHECK_DQ7 in code Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
Remove the latest reference of CONFIG_NO_RELOCATION in code Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
This define was left over from a previous revision, and was never used. Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
Remove some config finishing by _ badly added by scripts/build-whitelist.sh when joker is used in comments. for example: doc/uImage.FIT/command_syntax_extensions.txt: ... #ifdef CONFIG_OF_* | ... cmd/nvedit.c:# error Define one of CONFIG_ENV_IS_IN_{EEPROM| \ FLASH|MMC|FAT|EXT4|\ Remove also configs only used in comments: - CONFIG_BOOGER in include/linux/kconfig.h - CONFIG_COMMANDS - CONFIG_INIT_IGNORE_ERROR - CONFIG_REG_* - CONFIG_HOTPLUG : drivers/watchdog/omap_wdt.c:18 Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org>
-
- 08 10月, 2021 3 次提交
-
-
由 Patrick Delaunay 提交于
Remove the latest reference of CONFIG_USER_LOWLEVEL_INIT in code Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NPatrice Chotard <patrice.chotard@foss.st.com>
-
由 Patrick Delaunay 提交于
Remove the following STV0991 specific configs: - CONFIG_STV0991 (never used, only defined in CONFIG_SYS_EXTRA_OPTIONS) - CONFIG_STV0991_HZ (replaced by generic CONFIG_SYS_HZ) - CONFIG_STV0991_HZ_CLOCK (replaced by generic CONFIG_SYS_HZ_CLOCK) This patch allows to reduce the file config_whitelist.txt. Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NPatrice Chotard <patrice.chotard@foss.st.com>
-
由 Patrick Delaunay 提交于
This converts the CONFIG_STM32_FLASH to Kconfig by using tools/moveconfig.py Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NPatrice Chotard <patrice.chotard@foss.st.com>
-
- 06 10月, 2021 2 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_NAND_5_ADDR_CYCLE Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_NAND_PAGE_COUNT Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 28 9月, 2021 1 次提交
-
-
由 Patrick Delaunay 提交于
Remove the driver st_smic.c used in SPEAr products and the associated config CONFIG_ST_SMI; this driver is no more used in U-Boot after the commit 570c3dcf ("arm: Remove spear600 boards and the rest of SPEAr support"). Fixes: 570c3dcf ("arm: Remove spear600 boards and the rest of SPEAr support") Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NStefan Roese <sr@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-