Skip to content

U
U-Boot.Mirror

OS / U-Boot.Mirror

通知 1
Star 0
Fork 0
U
U-Boot.Mirror

前往新版Gitcode，体验更适合开发者的 AI 搜索 >>

提交 4884d829 编写于 作者: T Tom Rini
浏览文件
操作

Convert CONFIG_SYS_NAND_5_ADDR_CYCLE to Kconfig 

This converts the following to Kconfig:
   CONFIG_SYS_NAND_5_ADDR_CYCLE
Signed-off-by: NTom Rini <trini@konsulko.com>
上级 9d9f59dd
隐藏空白更改
内联 并排
Showing with 10 addition and 45 deletion
configs/devkit3250_defconfig
浏览文件 @ 4884d829
......@@ -57,6 +57,7 @@ CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
CONFIG_SYS_NAND_OOBSIZE=0x40
# CONFIG_SYS_NAND_5_ADDR_CYCLE is not set
CONFIG_PHYLIB=y
CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_ADDR=31
......
drivers/mtd/nand/raw/Kconfig
浏览文件 @ 4884d829
......@@ -425,6 +425,15 @@ config SYS_NAND_MAX_CHIPS
if SPL
config SYS_NAND_5_ADDR_CYCLE
bool "Wait 5 address cycles during NAND commands"
depends on SPL_NAND_AM33XX_BCH || SPL_NAND_SIMPLE || \
(SPL_NAND_SUPPORT && NAND_ATMEL)
default y
help
Some controllers require waiting for 5 address cycles when issuing
some commands, on NAND chips larger than 128MiB.
choice
prompt "NAND bad block marker/indicator positon in the OOB"
depends on SPL_NAND_AM33XX_BCH || SPL_NAND_DENALI || SPL_NAND_SIMPLE || \
......
include/configs/am335x_evm.h
浏览文件 @ 4884d829
......@@ -180,7 +180,6 @@
#ifdef CONFIG_MTD_RAW_NAND
/* NAND: device related configs */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* NAND: driver related configs */
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
......
include/configs/am335x_guardian.h
浏览文件 @ 4884d829
......@@ -106,9 +106,6 @@
#define CONFIG_SYS_BOOTCOUNT_LE
#ifdef CONFIG_MTD_RAW_NAND
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \
20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \
......
include/configs/am335x_igep003x.h
浏览文件 @ 4884d829
......@@ -106,7 +106,6 @@
#define CONFIG_SYS_NAND_ONFI_DETECTION 1
/* NAND config */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
......
include/configs/am3517_evm.h
浏览文件 @ 4884d829
......@@ -19,7 +19,6 @@
/* Board NAND Info. */
#ifdef CONFIG_MTD_RAW_NAND
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, 10, \
11, 12, 13, 14, 16, 17, 18, 19, 20, \
21, 22, 23, 24, 25, 26, 27, 28, 30, \
......
include/configs/am43xx_evm.h
浏览文件 @ 4884d829
......@@ -157,7 +157,6 @@
/* NAND support */
#ifdef CONFIG_MTD_RAW_NAND
/* NAND: device related configs */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* NAND: driver related configs */
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW
......
include/configs/at91sam9m10g45ek.h
浏览文件 @ 4884d829
......@@ -95,7 +95,6 @@
#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCSIZE 256
#define CONFIG_SYS_NAND_ECCBYTES 3
......
include/configs/at91sam9n12ek.h
浏览文件 @ 4884d829
......@@ -115,6 +115,5 @@
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#endif
include/configs/at91sam9x5ek.h
浏览文件 @ 4884d829
......@@ -98,6 +98,5 @@
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#endif
include/configs/baltos.h
浏览文件 @ 4884d829
......@@ -209,7 +209,6 @@
#ifndef CONFIG_NOR_BOOT
#ifdef CONFIG_MTD_RAW_NAND
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
......
include/configs/brppt1.h
浏览文件 @ 4884d829
......@@ -146,7 +146,6 @@ NANDTGTS \
#define CONFIG_SYS_NAND_BASE 0x8000000
/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
......
include/configs/chiliboard.h
浏览文件 @ 4884d829
......@@ -123,7 +123,6 @@
#define CONFIG_SYS_BOOTCOUNT_BE
/* NAND: device related configs */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* NAND: driver related configs */
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
......
include/configs/cm_t335.h
浏览文件 @ 4884d829
......@@ -85,7 +85,6 @@
/* Network. */
/* NAND support */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
......
include/configs/cm_t43.h
浏览文件 @ 4884d829
......@@ -23,7 +23,6 @@
/* NAND support */
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
......
include/configs/colibri_imx7.h
浏览文件 @ 4884d829
......@@ -188,7 +188,6 @@
/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
#endif
......
include/configs/corvus.h
浏览文件 @ 4884d829
......@@ -97,7 +97,6 @@
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCSIZE 256
#define CONFIG_SYS_NAND_ECCBYTES 3
......
include/configs/da850evm.h
浏览文件 @ 4884d829
......@@ -121,7 +121,6 @@
#undef CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x40000
#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
......
include/configs/devkit8000.h
浏览文件 @ 4884d829
......@@ -133,7 +133,6 @@
/* Defines for SPL */
/* NAND boot config */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
10, 11, 12, 13}
......
include/configs/dra7xx_evm.h
浏览文件 @ 4884d829
......@@ -80,7 +80,6 @@
/* NAND support */
#ifdef CONFIG_MTD_RAW_NAND
/* NAND: device related configs */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* NAND: driver related configs */
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
......
include/configs/gardena-smart-gateway-at91sam.h
浏览文件 @ 4884d829
......@@ -60,8 +60,6 @@
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS
#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO
......
include/configs/imx6-engicam.h
浏览文件 @ 4884d829
......@@ -137,7 +137,6 @@
#ifdef CONFIG_NAND_MXS
# define CONFIG_SYS_MAX_NAND_DEVICE 1
# define CONFIG_SYS_NAND_BASE 0x40000000
# define CONFIG_SYS_NAND_5_ADDR_CYCLE
# define CONFIG_SYS_NAND_ONFI_DETECTION
# define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
# define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
......
include/configs/imx6_logic.h
浏览文件 @ 4884d829
......@@ -129,7 +129,6 @@
/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
......
include/configs/mx6sabreauto.h
浏览文件 @ 4884d829
......@@ -52,7 +52,6 @@
/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
......
include/configs/mx6sxsabreauto.h
浏览文件 @ 4884d829
......@@ -106,7 +106,6 @@
/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
......
include/configs/mx7dsabresd.h
浏览文件 @ 4884d829
......@@ -111,7 +111,6 @@
/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
......
include/configs/mxs.h
浏览文件 @ 4884d829
......@@ -114,7 +114,6 @@
#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x60000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#endif
/* OCOTP */
......
include/configs/omap3_beagle.h
浏览文件 @ 4884d829
......@@ -22,7 +22,6 @@
#if defined(CONFIG_MTD_RAW_NAND)
#define CONFIG_SYS_FLASH_BASE NAND_BASE
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
10, 11, 12, 13}
#define CONFIG_SYS_NAND_ECCSIZE 512
......
include/configs/omap3_evm.h
浏览文件 @ 4884d829
......@@ -27,7 +27,6 @@
#if defined(CONFIG_MTD_RAW_NAND)
#define CONFIG_SYS_FLASH_BASE NAND_BASE
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
10, 11, 12, 13}
#define CONFIG_SYS_NAND_ECCSIZE 512
......
include/configs/omap3_igep00x0.h
浏览文件 @ 4884d829
......@@ -75,7 +75,6 @@
#define CONFIG_SYS_ONENAND_BLOCK_SIZE (128*1024)
/* NAND config */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
......
include/configs/omap3_logic.h
浏览文件 @ 4884d829
......@@ -18,7 +18,6 @@
#ifdef CONFIG_MTD_RAW_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
/* NAND devices */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
13, 14, 16, 17, 18, 19, 20, 21, 22, \
23, 24, 25, 26, 27, 28, 30, 31, 32, \
......
include/configs/omapl138_lcdk.h
浏览文件 @ 4884d829
......@@ -122,7 +122,6 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
#define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K
#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
......
include/configs/phycore_am335x_r2.h
浏览文件 @ 4884d829
......@@ -85,7 +85,6 @@
#ifdef CONFIG_MTD_RAW_NAND
/* NAND: device related configs */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* NAND: driver related configs */
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
......
include/configs/pm9g45.h
浏览文件 @ 4884d829
......@@ -85,7 +85,6 @@
#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCSIZE 256
#define CONFIG_SYS_NAND_ECCBYTES 3
......
include/configs/sama5d3_xplained.h
浏览文件 @ 4884d829
......@@ -70,7 +70,6 @@
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* Falcon boot support on raw MMC */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x100 /* 128 KiB */
......
include/configs/sama5d3xek.h
浏览文件 @ 4884d829
......@@ -82,6 +82,5 @@
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#endif
include/configs/sama5d4_xplained.h
浏览文件 @ 4884d829
......@@ -46,6 +46,5 @@
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#endif
include/configs/sama5d4ek.h
浏览文件 @ 4884d829
......@@ -46,6 +46,5 @@
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#endif
include/configs/siemens-am33x-common.h
浏览文件 @ 4884d829
......@@ -73,7 +73,6 @@
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
......
include/configs/smartweb.h
浏览文件 @ 4884d829
......@@ -166,7 +166,6 @@
#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_SIZE (SZ_256M)
#define CONFIG_SYS_NAND_ECCSIZE 256
......
include/configs/tam3517-common.h
浏览文件 @ 4884d829
......@@ -126,7 +126,6 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */
/* NAND boot config */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47,\
48, 49, 50, 51, 52, 53, 54, 55,\
56, 57, 58, 59, 60, 61, 62, 63}
......
include/configs/taurus.h
浏览文件 @ 4884d829
......@@ -168,7 +168,6 @@
#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_SIZE (256 * SZ_1M)
#define CONFIG_SYS_NAND_ECCSIZE 256
......
include/configs/ti816x_evm.h
浏览文件 @ 4884d829
......@@ -57,7 +57,6 @@
/* NAND: SPL related configs */
/* NAND: device related configs */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* NAND: driver related configs */
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
......
scripts/config_whitelist.txt
浏览文件 @ 4884d829
......@@ -2359,7 +2359,6 @@ CONFIG_SYS_MX7_HCLK
CONFIG_SYS_MXS_VDD5V_ONLY
CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
CONFIG_SYS_NAND_4_ADDR_CYCLE
CONFIG_SYS_NAND_5_ADDR_CYCLE
CONFIG_SYS_NAND_ACTL_ALE
CONFIG_SYS_NAND_ACTL_CLE
CONFIG_SYS_NAND_ACTL_DELAY
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或