- 14 5月, 2021 1 次提交
-
-
由 Kory Maincent 提交于
This commit extends the sandbox to implement a dummy extension_board_scan() function and enables the extension command in the sandbox configuration. It then adds a test that checks the proper functionality of the extension command by applying two Device Tree overlays to the sandbox Device Tree. Signed-off-by: NKory Maincent <kory.maincent@bootlin.com> [trini: Limit to running on sandbox] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 20 4月, 2021 2 次提交
-
-
由 Wasim Khan 提交于
Enable IRQ using select for sandbox architecture. Signed-off-by: NWasim Khan <wasim.khan@nxp.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Wasim Khan 提交于
use 'select' to enable IRQ as it does not have architecture specific dependency. Signed-off-by: NWasim Khan <wasim.khan@nxp.com> Reviewed-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
- 15 4月, 2021 1 次提交
-
-
由 Claudiu Manoil 提交于
The DSA sandbox driver is used for unit testing the DSA class code. It implements a simple 2 port switch plus 1 CPU port, and uses a very simple tag to identify the ports. The DSA sandbox device is connected via CPU port to a regular Ethernet sandbox device, called 'dsa-test-eth, managed by the existing eth sandbox driver. The 'dsa-test-eth' is not intended for testing the eth class code however, but it is used to emulate traffic through the 'lan0' and 'lan1' front pannel switch ports. To achieve this the dsa sandbox driver registers a tx handler for the 'dsa-test-eth' device. The switch ports, labeled as 'lan0' and 'lan1', are also registered as eth devices by the dsa class code this time. So pinging through these switch ports is as easy as: => setenv ethact lan0 => ping 1.2.3.5 Unit tests for the dsa class code were also added. The 'dsa_probe' test exercises most API functions from dsa.h. The 'dsa' unit test simply exercises ARP/ICMP traffic through the two switch ports, including tag injection and extraction, with the help of the dsa sandbox driver. I took care to minimize the impact on the existing eth unit tests, though some adjustments needed to be made with the addition of extra eth interfaces used by the dsa unit tests. The additional eth interfaces also require MAC addresses, these have been added to the sandbox default environment. Signed-off-by: NAlex Marginean <alexandru.marginean@nxp.com> Signed-off-by: NClaudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com> Message-Id: <20210216224804.3355044-5-olteanv@gmail.com> Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
- 14 3月, 2021 1 次提交
-
-
由 Igor Opaniuk 提交于
Enable by default SCP_03/CMD_SCP03 for sandbox target. Signed-off-by: NIgor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 19 12月, 2020 1 次提交
-
-
由 Simon Glass 提交于
The linker script uses alphabetic sorting to group the different linker lists together. Each group has its own struct and potentially its own alignment. But when the linker packs the structs together it cannot ensure that a linker list starts on the expected alignment boundary. For example, if the first list has a struct size of 8 and we place 3 of them in the image, that means that the next struct will start at offset 0x18 from the start of the linker_list section. If the next struct has a size of 16 then it will start at an 8-byte aligned offset, but not a 16-byte aligned offset. With sandbox on x86_64, a reference to a linker list item using ll_entry_get() can force alignment of that particular linker_list item, if it is in the same file as the linker_list item is declared. Consider this example, where struct driver is 0x80 bytes: ll_entry_declare(struct driver, fred, driver) ... void *p = ll_entry_get(struct driver, fred, driver) If these two lines of code are in the same file, then the entry is forced to be aligned at the 'struct driver' alignment, which is 16 bytes. If the second line of code is in a different file, then no action is taken, since the compiler cannot update the alignment of the linker_list item. In the first case, an 8-byte 'fill' region is added: .u_boot_list_2_driver_2_testbus_drv 0x0000000000270018 0x80 test/built-in.o 0x0000000000270018 _u_boot_list_2_driver_2_testbus_drv .u_boot_list_2_driver_2_testfdt1_drv 0x0000000000270098 0x80 test/built-in.o 0x0000000000270098 _u_boot_list_2_driver_2_testfdt1_drv *fill* 0x0000000000270118 0x8 .u_boot_list_2_driver_2_testfdt_drv 0x0000000000270120 0x80 test/built-in.o 0x0000000000270120 _u_boot_list_2_driver_2_testfdt_drv .u_boot_list_2_driver_2_testprobe_drv 0x00000000002701a0 0x80 test/built-in.o 0x00000000002701a0 _u_boot_list_2_driver_2_testprobe_drv With this, the linker_list no-longer works since items after testfdt1_drv are not at the expected address. Ideally we would have a way to tell gcc not to align structs in this way. It is not clear how we could do this, and in any case it would require us to adjust every struct used by the linker_list feature. One possible fix is to force each separate linker_list to start on the largest possible boundary that can be required by the compiler. However that does not seem to work on x86_64, which uses 16-byte alignment in this case but needs 32-byte alignment. So add a Kconfig option to handle this. Set the default value to 4 so as to avoid changing platforms that don't need it. Update the ll_entry_start() accordingly. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 13 12月, 2020 1 次提交
-
-
由 Heinrich Schuchardt 提交于
Test that an exception SIGILL is answered by a reset on the sandbox if CONFIG_SANDBOX_CRASH_RESET=y or by exiting to the OS otherwise. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 05 12月, 2020 2 次提交
-
-
由 Simon Glass 提交于
In some cases it is necessary to pass parameters to Linux so that it will boot correctly. For example, the rootdev parameter is often used to specify the root device. However the root device may change depending on whence U-Boot loads the kernel. At present it is necessary to build up the command line by adding device strings to it one by one. It is often more convenient to provide a template for bootargs, with U-Boot doing the substitution from other environment variables. Add a way to substitute strings in the bootargs variable. This allows things like "rootdev=${rootdev}" to be used in bootargs, with the ${rootdev} substitution providing the UUID of the root device. For example, to substitute the GUID of the kernel partition: setenv bootargs "console=/dev/ttyS0 rootdev=${uuid}/PARTNROFF=1 kern_guid=${uuid}" part uuid mmc 2:2 uuid bootm This is particularly useful when the command line from another place. For example, Chrome OS stores the command line next to the kernel itself. It depends on the kernel version being used as well as the hardware features, so it is extremely difficult to devise a U-Boot script that works on all boards and kernel versions. With this feature, the command line can be read from disk and used directly, with a few substitutions set up. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This function currently has no tests. Export it so that we can implement a simple test on sandbox. Use IS_ENABLED() to remove the unused code, instead #ifdef. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 06 11月, 2020 2 次提交
-
-
由 Simon Glass 提交于
Add a file containing defaults for these, using the existing CONFIG options. This file must be included with #include since it needs to be passed through the C preprocessor. Enable the driver for all x86 boards that generate SMBIOS tables. Disable it for coral since it has its own driver. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> [bmeng: reword the commit message a little bit] Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Heinrich Schuchardt 提交于
The command to shut down a device is 'poweroff'. It is a deficit of the sandbox that it does not support resetting yet but shuts down upong seeing the 'reset' command. Once the sandbox properly supports reset we need the 'poweroff' command to leave the sandbox. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 04 11月, 2020 1 次提交
-
-
由 Michal Simek 提交于
CONFIG_NEEDS_MANUAL_RELOC macro was out of Kconfig. Move it there to be able to use compile-time checks to reduce the number of build paths. Fixes: f9a882438966 ("dm: core: Convert #ifdef to if() in root.c") for Microblaze Reviewed-by: NTom Rini <trini@konsulko.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 27 8月, 2020 1 次提交
-
-
由 Michal Simek 提交于
ARC is selecting TIMER which depends on DM but DM is not selected and doesn't need to be enabled. Fix it by selecting DM for ARC architecture. Kconfig is showing this missing dependency by: WARNING: unmet direct dependencies detected for TIMER Depends on [n]: DM [=n] Selected by [y]: - ARC [=y] && <choice> Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 07 8月, 2020 1 次提交
-
-
由 Ovidiu Panait 提交于
Move all assignments to gd->bd->bi_mem{start,size} to generic code in setup_bdinfo. Xtensa architecture is special in this regard as it defines its own handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags. For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is not needed anymore. Also, use gd->ram_base to populate bi_memstart to avoid an ifdef. Signed-off-by: NOvidiu Panait <ovidiu.panait@windriver.com> Acked-by: NAlexey Brodkin <abrokdin@synopsys.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 05 8月, 2020 1 次提交
-
-
由 John Chau 提交于
This patch adds a feature for block device cloning similar to dd command, this should be useful for boot-strapping a device where usb gadget or networking is not available. For instance one can clone a factory image into a blank emmc from an external sd card. Signed-off-by: NJohn Chau <john@harmon.hk>
-
- 29 7月, 2020 1 次提交
-
-
由 Simon Glass 提交于
Most x86 boards build a u-boot.rom which is programmed into SPI flash. But this is not unique to x86. For example some rockchip boards can also boot from SPI flash. Also, at least on x86, binary blobs are sadly quite common. It is not possible to build a functional image without them, and U-Boot needs to know this at build time. Introduce a new CONFIG_HAS_ROM option which selects whether u-boot.rom is built and a new CONFIG_ROM_NEEDS_BLOBS option to indicate whether binary blobs are also needed. If they are not needed, it is safe to build the ROM always. Otherwise we still require the BUILD_ROM environment variable. For now this affects only x86, but future patches will enable this for rockchip too. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 17 7月, 2020 1 次提交
-
-
由 Simon Glass 提交于
This should ideally be used by all x86 boards in U-Boot. Enable it by default. If some boards don't use it, the cost is small. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 25 5月, 2020 1 次提交
-
-
由 Michael Walle 提交于
CONFIG_BZIP2 and CONFIG_GZIP_COMPRESSED are Kconfig options. Select them by CONFIG_SANDBOX instead of setting them in configs/sandbox.h. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 16 4月, 2020 1 次提交
-
-
由 Heinrich Schuchardt 提交于
Currently we are not able to test reservations created by ft_board_setup(). Implement ft_board_setup() to create an arbitrary reservation and enable OF_BOARD_SETUP. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromum.org>
-
- 15 12月, 2019 4 次提交
-
-
由 Simon Glass 提交于
If these phases are used we typically want to enable pinctrl in then, so that pad setup and GPIO access are possible. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Simon Glass 提交于
We don't want to pull in libfdt if of-platdata is being used, since it reduces the available code-size saves. Also, SPI flash is seldom needed in TPL. Drop these options. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Simon Glass 提交于
Update this uclass to support the needs of the Apollo Lake ITSS. It supports four operations. Move the uclass into a separate directory so that sandbox can use it too. Add a new Kconfig to control it and enable this on x86. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Simon Glass 提交于
Add a simple PMC for sandbox to permit tests to run. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 02 9月, 2019 1 次提交
-
-
由 Marek Vasut 提交于
Enable OF control for SH4 R2Dplus board. This is necessary, because the PCI uclass is designed in a way that makes it depend on DT and disallows instanciating devices without DT (e.g. with platdata). Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 26 8月, 2019 1 次提交
-
-
由 Lukas Auer 提交于
U-Boot SPL on the generic RISC-V CPU supports two boot flows, directly jumping to the image and via OpenSBI firmware. In the first case, both U-Boot SPL and proper must be compiled to run in the same privilege mode. Using OpenSBI firmware, U-Boot SPL must be compiled for machine mode and U-Boot proper for supervisor mode. To be able to use SPL, boards have to provide a supported SPL boot device. Signed-off-by: NLukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Tested-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NAnup Patel <anup.patel@wdc.com>
-
- 19 8月, 2019 1 次提交
-
-
由 Urja Rannikko 提交于
This is a generic implementation. Add CONFIG_SYSRESET_CMD_POWEROFF to signal when we need it. Enable it from the STPMIC1 config and in sandbox. The config flag is transitionary, that is it can be removed after all poweroff implementations use sysreset, and just have CMD_POWEROFF depend on sysreset. Signed-off-by: NUrja Rannikko <urjaman@gmail.com> Reviewed-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NPatrick Delaunay <patrick.delaunay@st.com> Tested-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
- 19 7月, 2019 1 次提交
-
-
由 Alex Marginean 提交于
Adds a test using a makeshift MDIO MUX. The test is based on the existing MDIO test. It uses the last emulated PHY register to verify MUX selection. Signed-off-by: NAlex Marginean <alexm.osslist@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 16 7月, 2019 1 次提交
-
-
由 Alex Marginean 提交于
A very simple test for DM_MDIO, mimicks a register write/read through the sandbox bus to a dummy PHY. Signed-off-by: NAlex Marginean <alexm.osslist@gmail.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Tested-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 11 7月, 2019 1 次提交
-
-
由 Ramon Fried 提交于
Add a dummy PCI endpoint for sandbox. Supporting only a single function, it allows setting and reading header configuration. Signed-off-by: NRamon Fried <ramon.fried@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 13 6月, 2019 1 次提交
-
-
由 Tom Rini 提交于
In order to use CMD_SF / CMD_SPI / ENV_IS_IN_SPI_FLASH we need to have the SPI (or SPI_FLASH/DM_SPI_FLASH, for CMD_SF) enabled. Express this in the Kconfigs. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>
-
- 24 5月, 2019 1 次提交
-
-
由 Angelo Dureghello 提交于
Add SUPPORT_OF_CONTROL at this stage, to avoid to break build bisectability. Signed-off-by: NAngelo Dureghello <angelo@sysam.it>
-
- 08 5月, 2019 3 次提交
-
-
由 Kever Yang 提交于
SPL/TPL also need use sysreset for some feature like panic callback. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Simon Glass 提交于
With the move to Kconfig this option should be set in Kconfig, not in the config header file. Move it. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Simon Glass 提交于
At present only chromebook_link64 supports SPL. It is useful to eb able to support both TPL and SPL to implement verified boot on x86. Enable the options for both along with some suitable default options needed to boot through these phases. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 05 5月, 2019 1 次提交
-
-
由 Vignesh Raghavendra 提交于
On AM654 SoC(arm64) which is IO coherent and has L3 Cache, cache maintenance operations being done to support non-coherent platforms causes issues. For example, here is how U-Boot prepares/handles a buffer to receive data from a device (DMA Write). This may vary slightly depending on the driver framework: Start DMA to write to destination buffer Wait for DMA to be done (dma_receive()/dma_memcpy()) Invalidate destination buffer (invalidate_dcache_range()) Read from destination buffer The invalidate after the DMA is needed in order to read latest data from memory that’s updated by DMA write. Also, in case random prefetch has pulled in buffer data during the “wait for DMA” before the DMA has written to it. This works well for non-coherent architectures. In case of coherent architecture with L3 cache, DMA write would directly update L3 cache contents (assuming cacheline is present in L3) without updating the DDR memory. So invalidate after “wait for DMA” in above sequence would discard latest data and read will cause stale data to be fetched from DDR. Therefore invalidate after “wait for DMA” is not always correct on coherent architecture. Therefore, provide a Kconfig option to disable cache maintenance ops on coherent architectures. This has added benefit of improving the performance of DMA transfers as we no longer need to invalidate/flush individual cache lines(especially for buffer thats several KBs in size). In order to facilitate use of same Kconfig across different architecture, I have added the symbol to top level arch/Kconfig file. Patch currently disables cache maintenance ops for arm64 only. flush_dcache_all() and invalidate_dcache_all() are exclusively used during enabling/disabling dcache and hence are not disabled. Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com>
-
- 27 2月, 2019 1 次提交
-
-
由 Anup Patel 提交于
We select CREATE_ARCH_SYMLINK for RISC-V so that we can have include/asm/arch linked to include/asm/arch-xyz. Signed-off-by: NAnup Patel <anup.patel@wdc.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 20 2月, 2019 1 次提交
-
-
由 Simon Glass 提交于
At present this uclass is selected only on x86. In order to add a test for it, it must also support sandbox. Create a new CONFIG_PCH option and enable it on x86 and sandbox. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 14 12月, 2018 1 次提交
-
-
由 Simon Glass 提交于
The U-Boot sound system provides basic support for beeping. At present it does not use driver model, but it needs to be converted. Add an option to enable driver model for sound. For now it is not connected to anything. Future work will add drivers which use this option. It will then be removed once everything is converted. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 26 11月, 2018 1 次提交
-
-
由 Simon Glass 提交于
Add a unit test for the bloblist functionality and enable bloblist for sandbox. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 15 11月, 2018 1 次提交
-
-
由 Bin Meng 提交于
Now that we have a sandbox virtio transport driver, add some test cases to test virtio uclass driver. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-