- 19 4月, 2016 19 次提交
-
-
由 Alexander Graf 提交于
When loading an el torito image, uEFI exposes said image as a raw block device to the payload. Let's do the same by creating new block devices with added offsets for the respective el torito partitions. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The snippet of code to add a drive to our drive list needs to get called from 2 places in the future. Split it into a separate function. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
Real CD-ROMs are pretty obsolete these days. Usually people still keep iso files around, but just put them on USB sticks or SD cards and expect them to "just work". To support this use case with El Torito images, add support for 512 byte sector size to the iso parsing code. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The generic partition code treats partition 0 as "whole disk". So we should start with partition 1 as the first partition in the iso partition table. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The iso partition table implementation has a few endian and 64bit problems. Clean it up a bit to become endian and bitness safe. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Steve Kipisz 提交于
The AM572x-IDK board (Industrial Dev Kit) is a board based on TI's AM5728x SOC which has a dual core 1.5GHz A15 processor. This board is a development platform for the Industrial market with: - 2GB of DDR3L - Dual 1Gbps Ethernet - HDMI, - PRU-ICSS - uSD - 16GB eMMC - CAN - RS-485 - PCIe - USB3.0 - Video Input Port - Industrial IO port and expansion connector The link to the data sheet and TRM can be found here: http://www.ti.com/product/AM5728 NOTE: DT support is still pending upstream kernel acceptance but we should be able to get the base system support with this patch. Signed-off-by: NSchuyler Patton <spatton@ti.com> Signed-off-by: NSteve Kipisz <s-kipisz2@ti.com> Signed-off-by: NNishanth Menon <nm@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Schuyler Patton 提交于
Update EMIF data based on recommendations from the now standard TI EMIF tool version 1.1.1 based on 256MBx16 DDR3L Kingston D2516EC4BXGGB data sheet Update T_RRD from 5 to 6 based on AM57xx TRM - Minimum number of DDR cycles from activate to ativate for a different bank, minus 1. Update T_CKESR from 4 to 3 based on AM57xx TRM - Minimum number of DDR clocks cycles for which SDRAM must remain in self refresh, minus 1. Signed-off-by: NSchuyler Patton <spatton@ti.com> Signed-off-by: NNishanth Menon <nm@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Daniel Allred 提交于
- Move the CONS_INDEX selection out of CONFIG_SYS_EXTRA_OPTIONS and into Kconfig proper. - Edit the relevant am57x configs to remove the now unneeded CONFIG_SYS_EXTRA_OPTIONS. Signed-off-by: NDaniel Allred <d-allred@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Michal Simek 提交于
Create CMD_FDT Kconfig entry to have an option to disable fdt command which is not required for small configuration which requires libfdt only. Enable it by default for all targets which enables OF_LIBFDT. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> [trini: Fixup flea3/sandbox/id8313/siemens-am33xx/smartweb] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Michal Simek 提交于
This patch follows work done by: "Move CONFIG_OF_LIBFDT to Kconfig" (sha1: 69e173eb) Signed-off-by: NMichal Simek <michal.simek@xilinx.com> [trini: Add xpress* to the patch] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Steve Rae 提交于
Enable saving ENV to MMC for the bcm281xx boards. Signed-off-by: NSteve Rae <srae@broadcom.com>
-
由 Steve Rae 提交于
set the Kconfig parameter: CONFIG_OF_LIBFDT Signed-off-by: NSteve Rae <srae@broadcom.com>
-
由 Mugunthan V N 提交于
enable mmc driver model for dra74 evm as omap_hsmmc supports driver model Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Mugunthan V N 提交于
enable mmc driver model for dra72 evm as omap_hsmmc supports driver model Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Mugunthan V N 提交于
As per mmc device tree binding documentation card detect gpio has to be active low signal. When a hardware is designed with active high card detect, gpio polarity has to be changed with cd-inverted dt property. In DRA72x and AM57xx EVMs the card detect gpio is designed as active low gpio. So correcting the dt card detect gpio definition. Also adding card-detect gpio for DRA74x EVM. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Mugunthan V N 提交于
As per mmc device tree binding documentation card detect gpio has to be active low signal. When a hardware is designed with active high card detect, gpio polarity has to be changed with cd-inverted dt property. In AM43xx the card detect gpio is designed as active low gpio. So correcting the dt card detect gpio definition. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Mugunthan V N 提交于
Add request gpio for CD and WP gpios, so that the gpio can be used for the respective purposes. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Mugunthan V N 提交于
omap_hsmmc driver directly typecasts fdt_addr_t to a pointer. This is not strictly correct, as it gives a build warning when fdt_addr_t is u64. So, use map_physmem for a proper typecasts. This is inspired by commit 167efe01 ("dm: ns16550: Use an address instead of a pointer for the uart base") drivers/mmc/omap_hsmmc.c: In function ‘omap_hsmmc_ofdata_to_platdata’: drivers/mmc/omap_hsmmc.c:776:20: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] priv->base_addr = (struct hsmmc *)dev_get_addr(dev); ^ Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Peng Fan 提交于
Introduce env support for sata device. 1. Implement write_env/read_env/env_relocate_spec/saveenv/sata_get_env_dev 2. If want to enable this feature, define CONFIG_ENV_IS_IN_SATA, and define CONFIG_SYS_SATA_ENV_DEV or implement your own sata_get_ev_dev. Signed-off-by: NPeng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Stuart Longland <stuartl@vrt.com.au> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 16 4月, 2016 1 次提交
-
-
由 Stephen Warren 提交于
The Pi firmware has changed the default "kernel" load address for 64-bit mode. The authors have confirmed that this is a deliberate and long-term change. Adapt U-Boot to the new value. Signed-off-by: NStephen Warren <swarren@wwwdotorg.org>
-
- 15 4月, 2016 9 次提交
-
-
由 Tom Rini 提交于
In rollback_space_kernel we were not initializing the reserved fields which should be for safety sake, and doing memset here means we don't need to set the version field specifically either. Reported-by: Coverity (CID: 143917) Cc: Simon Glass <sjg@chromium.org> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Stephen Warren 提交于
This function parses the reg property based on an index found in the reg-names property. This is required for bindings that are written using reg-names rather than hard-coding indices in reg. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
- Set CONFIG_SYS_CACHELINE_SIZE to ARCH_DMA_MINALIGN as that should be good enough. - Make <asm/io.h> include <asm/types.h> like other arches do - Enable many many more drivers in sandbox_defconfig so that we can get more build-time testing on this platform. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
LLVM 3.5 noted: test/dm/core.c:41:35: warning: unused variable 'test_pdata_pre_reloc' [-Wunused-const-variable] static const struct dm_test_pdata test_pdata_pre_reloc = { And the correct fix here is that the driver_info_pre_reloc test should use the test_pdata_pre_reloc not test_pdata_manual variable Cc: Simon Glass <sjg@chromium.org> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Jagan Teki 提交于
Update dm test command with pytest instead of ./test/dm/test-dm.sh Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NJagan Teki <jteki@openedev.com>
-
由 Jagan Teki 提交于
Since all the tests are implemented in pytest infrastructure, So update the dm tests with the same instead of ./test/dm/test-dm.sh Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NJagan Teki <jteki@openedev.com>
-
由 Stefan Roese 提交于
Fix multi-line comment indentation in device_bind() Signed-off-by: NStefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Nishanth Menon 提交于
Fixes the following warning with PART_DEBUG enabled: disk/part.c: In function ‘get_partition_info’: disk/part.c:372:3: warning: format ‘%s’ expects a matching ‘char *’ argument [-Wformat] Signed-off-by: NNishanth Menon <nm@ti.com>
-
由 Peng Fan 提交于
We may have pinmux settings for pinctrl device, like the following example: " &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog_1>; imx6ul-evk { pinctrl_hog_1: hoggrp-1 { fsl,pins = < MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */ MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */ MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */ MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x80000000 >; }; [......] }; " We should not only select pinctrl state for non pinctrl devices, we need also to handle pin mux settings such as pinctrl_log for pinctrl devices. So at the end of probing process of pinctrl device, select the default state of pinctrl device. Signed-off-by: NPeng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 14 4月, 2016 11 次提交
-
-
由 Tom Rini 提交于
This has been renamed to <usb/ehci-ci.h> some time ago but was missed here. Signed-off-by: NTom Rini <trini@konsulko.com>
-
-
由 Michal Simek 提交于
Use i2c cadence DM driver for all zynqmp targets except ZCU102 because I2C muxes and PCA953x are not supported in the tree yet. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Moritz Fischer 提交于
This is a possible drop in replacement for drivers/i2c/zynq-i2c.c Since this is cadence IP it has been renamed to cdns-i2c, to make sense with the compatible string. Signed-off-by: NMoritz Fischer <moritz.fischer@ettus.com> Reviewed-by: NHeiko Schocher <hs@denx.de> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Moritz Fischer 提交于
Signed-off-by: NMoritz Fischer <moritz.fischer@ettus.com> Reviewed-by: NHeiko Schocher <hs@denx.de> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
zcu102 has two pca953x on i2c bus 0. Chips 0x20 and 0x21. Enable option to work with these two chips. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Warnings: w+../drivers/gpio/pca953x.c: In function ‘do_pca953x’: w+../drivers/gpio/pca953x.c:220:5: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] w+../drivers/gpio/pca953x.c:233:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Enable missing GPIO options. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
Enable ZYNQ_GPIO for ZynqMP using Kconfig. It enables the GPIO driver support for ZynqMP. Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
Add GPIO driver support for ZynqMP platform Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
Move all the gpio definitions to driver file as there is no use of them in other files. Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-