- 19 4月, 2018 1 次提交
-
-
- 18 4月, 2018 11 次提交
-
-
-
git://git.denx.de/u-boot-arc由 Tom Rini 提交于
Subtle ARC fixes for v2018.05-RC3 These are only very subtle clean-ups here and there including: * Correctly specified CPU freq for HSDK (production boards are all shipped with 500MHZ as opposed to early batch running at 1GHz) * Addition of SNPS internal group email to MAINTAINERS file * Switch to Hush shell on AXS10x boards
-
由 Neil Armstrong 提交于
In the commit "reset: Add get/assert/deassert/release for bulk of reset signals" the disabled reset_release_bulk() and reset_get_bulk() used the wrong struct clk_bulk instead of struct reset_ctl_bulk. Fixes: 0c282339 ("reset: Add get/assert/deassert/release for bulk of reset signals") Reported-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bryan O'Donoghue 提交于
commit b4d956f6 ("bootm: Align cache flush end address correctly") aligns the end address of the cache flush operation to a cache-line size to ensure lower-layers in the code accept the range provided and flush. A similar action should be taken for the begin address of a cache flush operation. The load address may not be aligned to a cache-line boundary, so ensure the passed address is aligned. Signed-off-by: NBryan O'Donoghue <bryan.odonoghue@linaro.org> Reported-by: NBreno Matheus Lima <brenomatheus@gmail.com> Suggested-by: NTom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: NBreno Lima <breno.lima@nxp.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Neil Armstrong 提交于
This fixes the Coverity Defect CID 175347 when dev_count_phandle_with_args() returns a negative value. Fixes: a855be87 ("clk: Add get/enable/disable/release for a bulk of clocks") Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
由 Neil Armstrong 提交于
This fixes the Coverity Defect CID 175348 when dev_count_phandle_with_args() returns a negative value. Fixes: 0c282339 ("reset: Add get/assert/deassert/release for bulk of reset signals") Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
由 Marek Vasut 提交于
The M2 Koelsch port was broken since some time. This patch updates the M2 Koelsch port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Eugeniy Paltsev 提交于
"Global data" structure "gd" is not used in init_helpers.c thus DECLARE_GLOBAL_DATA_PTR might be safely removed. Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
-
由 Eugeniy Paltsev 提交于
Update ARC architecture maintainers and add uboot-snps-arc@synopsys.com mailing list. Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
-
由 Eugeniy Paltsev 提交于
Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
-
由 Eugeniy Paltsev 提交于
CPU on HSDK board runs at 500MHz after preloader so fix wrong CPU frequency value in hsdk_defconfig. Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
-
- 17 4月, 2018 27 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
-
由 Dinh Nguyen 提交于
None of the SoCFPGA platforms will support EFI/ISO partition types that is needed for DISTRO_DEFAULTS. SoCFPGA bootroom will only support 0xa2 partition type. This is needed to help limit the size of the SPL to within the 64k limit that is required for SoCFPGA. Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
-
由 Dinh Nguyen 提交于
Add the DM reset driver to socfpga defconfigs. Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
-
由 Dinh Nguyen 提交于
Add code to look for a reset manager property. Specifically, look for the reset-names of 'i2c'. A reset property is an optional feature, so only print out a warning and do not fail if a reset property is not present. If a reset property is discovered, then use it to deassert, thus bringing the IP out of reset. Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
-
由 Dinh Nguyen 提交于
Add reset dts property to the i2c nodes. Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
-
由 Dinh Nguyen 提交于
Add all the appropriate i2c alias in the base socfpga dtsi and enables the i2c node on the DE0 NANO board. Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
-
由 Dinh Nguyen 提交于
Enable DM I2C driver on SoCFPGA platforms. Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
-
由 Dinh Nguyen 提交于
Add a DM compatible reset driver for the SoCFPGA platform. Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
-
由 Dinh Nguyen 提交于
From the Linux v4.16-rc4, add the base dtsi and devkit dts files for the Stratix10 SoCFPGA platform. Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
-
由 Dinh Nguyen 提交于
Pulled from linux v4.16-rc4. Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
-
由 Chin Liang See 提交于
Add the base address map for Stratix10 SoC Signed-off-by: NChin Liang See <chin.liang.see@intel.com> Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
-
由 Marek Vasut 提交于
When U-Boot is started via JTAG, ignore the installed environment as it may interfere with the recovery of the board. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
When U-Boot is started via JTAG, ignore the installed environment as it may interfere with the recovery of the board. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Enable fitImage support to be on the right side of the millenium. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
The SDHI is not routed to a slot on the Eagle, so disable it. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Enable the RPC QSPI driver on R8A77970 V3M Eagle and configure the environment layout to match that used by old U-Boot. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Add device tree nodes for the Renesas RPC HF/QSPI controller. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Matt Pelland 提交于
The mv_sdhci driver was not zeroing the sdhci_host structure it allocates causing random access violations in parts of the mmc core where the "ops" member pointers are checked and called if not NULL. Signed-off-by: NMatt Pelland <mpelland@starry.com> Reviewed-by: NStefan Roese <sr@denx.de> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Patrice Chotard 提交于
The line "-obj-$(CONFIG_STM32_SERIAL) += serial_stm32.o" is found twice in Makefile. Fixes: ae74de0d ("serial: stm32: Rename serial_stm32x7.c to serial_stm32.c" Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Acked-by: NVikas Manocha <vikas.manocha@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Lukasz Majewski 提交于
Signed-off-by: NLukasz Majewski <lukma@denx.de>
-
由 Heinrich Schuchardt 提交于
For CONFIG_ENV_FAT_INTERFACE != 'mmc' a link error env/fat.c:93: undefined reference to `mmc_initialize' occurs if CONFIG_MMC_SUPPORT is not enabled. Fixes: 26862b4a ("env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it") Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
Relocate env drivers if manual relocation is enabled. This patch fixes the issue of u-boot hang incase if env is present in any of the flash devices. Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Sjoerd Simons 提交于
Since commit 8e14ba7b ("gpio: omap_gpio: Add DM_FLAG_PRE_RELOC flag") omap GPIO gets bound before relocation. Unfortunately due to this, on at least the beaglebone black, the pre-relocation memory pool gets exhausted before probing the serial port. This then causes u-boot to panic as CONFIG_REQUIRE_SERIAL_CONSOLE is set... Resolve this by resizing the default size of the pre-relocation malloc pool for AM335X platforms. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
-
由 Alexander Graf 提交于
We enabled CONFIG_ISO_PARTITION by default for distro boot, so that U-Boot could load distro images that usually get shipped as iso images. These images usually come with a board agnostic boot environment. However, there is very little point in having ISO support enabled (for anyone really) in SPL, as the whole idea of SPL is to load U-Boot proper which again is board specific. So the fact that we enable ISO support in U-Boot proper does not mean at all that we want ISO support in U-Boot SPL. Hence, let's remove the Kconfig dependency. Along the way, let's also clean up all those default configs that disabled SPL ISO support. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
-
- 16 4月, 2018 1 次提交
-
-
由 Simon Glass 提交于
We only use coreboot as a target on x86 platforms, since on ARM platforms U-Boot always runs as the primary boot loader. Rename the coreboot-x86 platform to reflect this. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-