Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

Forgot to cast of_flat_tree to ulong.
Signed-off-by: NAndy Fleming <afleming@freescale.com>

The TSEC driver's PHY code waits a long time for autonegotiation to
complete, even if the link is down.  The PHY knows the link is
down or up before autonegotiation completes, so we can short-circuit
the process if the link is down.
Signed-off-by: NAndy Fleming <afleming@freescale.com>

Actually, fixed a large bug in the UEC for *all* platforms.
How did this ever work?

uec_init() did not follow the spec for eth_init(), and returned
0 on success.  Switch it to return the link like tsec_init()
(and 0 on error)

The immap for the 8568 was defined based on MPC8568, rather than
CONFIG_MPC8568

CONFIG_QE was off

CONFIG_ETHPRIME was set to "Freescale GETH".  Now is "FSL UEC0"

Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
enabled
Signed-off-by: NAndy Fleming <afleming@freescale.com>

The tsec_info structure and array has a "flags" field for each
ethernet controller.  This field is the only reason there are
settings.  Switch to defining TSECn_FLAGS for each controller
in the config header, and we can greatly simplify the array, and
also simplify the addition of future boards.
Signed-off-by: NAndy Fleming <afleming@freescale.com>

Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
Now we can do a MAKEALL test on all of them!
Signed-off-by: NAndy Fleming <afleming@freescale.com>

The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
neglected to *also* put the code inside the similar #ifdef
for CONFIG_OF_FLAT_TREE.
Signed-off-by: NAndy Fleming <afleming@freescale.com>

bzip2 requires a significant chunk of malloc space, and there isn't
enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
and a downloaded image at 0x400000.
Signed-off-by: NScott Wood <scottwood@freescale.com>

microblaze CPU have problem with bios_emulator code.
Microblaze toolchain doesn't support PRAGMA PACK.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Signed-off-by: NWolfgang Denk <wd@denx.de>

This small CPCI750 update extends the board specific command
"show_config" to display the Marvell strapping registers and
extends the PCI IDE controller.
Signed-off-by: NReinhard Arlt <reinhard.arlt@esd-electronics.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Remove a leftover in net/tftp.c while we're at it.
Signed-off-by: NJon Loeliger <jdl@freescale.com>

Minor path corrections needed to ensure buildability.
Signed-off-by: NJon Loeliger <jdl@freescale.com>

Remove a leftover in net/tftp.c while we're at it.
Signed-off-by: NJon Loeliger <jdl@freescale.com>

Commit 073e1b50 "Fix initrd/dtb
interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
when it should have gone inside of the conditional.  As a result, it
broke non-LIBFDT board builds.

Also added a missing "not." to the comment.
Signed-off-by: NGerald Van Baren <vanbaren@cideas.com>

Typically this causes scsi init to corrupt the
devlist and break the coninfo command.
Fix a compiler size warning.
Signed-off-by: NJason Jin <jason.jin@freescale.com>
Signed-off-by: NEd Swarthout <Ed.Swarthout@freescale.com>
Acked-by: NAndy Fleming <afleming@freescale.com>

Signed-off-by: NSergey Kubushyn <ksi@koi8.net>

Signed-off-by: NWolfgang Denk <wd@denx.de>