We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
  CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
  2), set this to 8.
Signed-off-by: NTom Rini <trini@konsulko.com>

Move CONFIG_NR_DRAM_BANKS from headers to Kconfig.
Signed-off-by: NRamon Fried <ramon.fried@gmail.com>

If CONFIG_NR_DRAM_BANKS is bigger than the default
value (4) define MEMORY_BANKS_MAX as CONFIG_NR_DRAM_BANKS.

Fixes: 2a1f4f17 ("Revert "fdt_support: Use CONFIG_NR_DRAM_BANKS if defined"")
Signed-off-by: NRamon Fried <ramon.fried@gmail.com>

While we have long since migrated to CONFIG_SYS_GENERIC_BOARD being
enabled, we had just a few places left that still referenced or defined
it.  Update.
Signed-off-by: NTom Rini <trini@konsulko.com>

Signed-off-by: NTom Rini <trini@konsulko.com>

Rsync all defconfig files using moveconfig.py
Signed-off-by: NTom Rini <trini@konsulko.com>

Add new drivers
Add Christophe Kerello and myself as maintainers
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

This patch fix the following warnings for for stm32f429
evaluation and discovery boards:

unnecessary #address-cells/#size-cells without "ranges" or
child "reg" property
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

Add ADC device tree node. This allows to get analog conversions on
stm32mp157.
Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

As cd-inverted property is no more used by arm_pl180_mmci driver,
remove it. Update cd-gpios active level accordingly.
Reported-by: NTuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

As cd-inverted property is no more used by arm_pl180_mmci driver,
remove it. Update cd-gpios active level accordingly.
Reported-by: NTuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

This commit enables CONFIG_BLK and removes USB_STORAGE which is awaiting
proper implementation for current U-Boot interfaces. Additionally the
console selection is now handled by Kconfig and no longer needs to be in
the config header. CONFIG_SYS_MALLOC_F_LEN=0x2000 was added to sync with
other boards. CONFIG_SPL_BLK and CONFIG_SPL_DM_MMC are disabled because
they currently do not allow the OMAP3-EVM (OMAP34XX) to actually boot.
Signed-off-by: NDerald D. Woods <woods.technical@gmail.com>

The recv variable in sandbox_tpm2_fill_buf() is a pointer on a pointer
of a char array. It means accessing *recv is the char array pointer
itself while **recv is the first character of that array. There is no
need for such indirection here, so simplify the code.

Simplifying things will make the last assignment right: "*recv = NULL"
is now correct. The issue has been found by the following Coverity
Scan report:

    CID 183371:  Incorrect expression  (UNUSED_VALUE)
    Assigning value "4UL" to "*recv" here, but that stored value is overwritten before it can be used.
    232             *recv += sizeof(rc);
    233
    234             /* Add trailing \0 */
    235             *recv = NULL;

While at simplifying things, use '\0' instead of NULL when adding an
empty char at the end of the buffer.
Reported-by: NTom Rini <trini@konsulko.com>
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

The second check on pcr_map in sandbox_tpm2_xfer() is wrong. It should
check for pcr_map not being empty. Instead, it is a pure copy/paste of
the first check which is redundant.

This has been found thanks to a Coverity Scan report:

    CID 183370:  Memory - illegal accesses  (UNINIT)
    Using uninitialized value "pcr_index".
        put_unaligned_be32(tpm->pcr_extensions[pcr_index], recv);

This is because pcr_index is initialized only if the user input is
correct, ie. at least one valid bit is set in pcr_map.

Fix the second check and also initialize pcr_index to 0 (which is
harmless in case of error) to make Coverity Scan happy.
Reported-by: NTom Rini <trini@konsulko.com>
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Add scattered driver files around the source tree
that belongs to Snapdragon arch. Not sure why they
were not included in the first place.
Signed-off-by: NRamon Fried <ramon.fried@gmail.com>

1. Add FIT support for DB410c defconfig.
2. Don't overwrite bootargs (they're already
   defined in Linux device tree for DB410c.
Signed-off-by: NRamon Fried <ramon.fried@gmail.com>

Change the way MAC address fixup is done:
1. Stop using LK handed device-tree and calculate
   the MAC address our own.
2. Allow overriding the generated MACS with environment variables:
   "wlanaddr" and  "btaddr".
Signed-off-by: NRamon Fried <ramon.fried@gmail.com>

Add support for generation of unique MAC address
that is derived from board serial.
Algorithm for generation of MAC taken from LK.
Signed-off-by: NRamon Fried <ramon.fried@gmail.com>

This commit adds a function to get the board
serial number.
In snapdragon it's actually the eMMC serial number.

Function added in a new file misc.c that will
include further snapdragon miscellaneous functions.
Signed-off-by: NRamon Fried <ramon.fried@gmail.com>

Commit 1473b12a ("lib: fdtdec: Update ram_base to store ram start
adddress") brings regression on STM32F7 which can't boot.

Use fdtdec_setup_mem_size_base() to setup memory base and size.
Use fdtdec_setup_memory_banksize() to setup memory bank base and size.
Reported-by: NMark Olsson <mark@markolsson.se>
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Cc: Mark Olsson <mark@markolsson.se>
Reviewed-by: NVikas Manocha <vikas.manocha@st.com>

Add DISTRO_DEFAULT support to be able to boot on mmc
by default on boot.
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

Add DISTRO_DEFAULT support to be able to boot on mmc
by default on boot.
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

Add DISTRO_DEFAULT support to be able to boot on
mmc by default on boot.
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

Add DISTRO_DEFAULT support to be able to boot on mmc
by default on boot.
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

Since commit bfea69ad ("stm32f7: sdram: correct sdram
configuration as per micron sdram"), CONFIG_SYS_RAM_FREQ_DIV
flag is no more used, remove it.
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

Remove CONFIG_CMD_CACHE from include/configs/stm32h7xx.h
and enable it in stm32h7xx_defconfig
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

Remove CONFIG_CMD_CACHE from include/configs/stm32f746-disco.h
and enable it in stm32f746-disco_defconfig
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

Enable instruction and data caches.
Fix boot_sd command as since commit d409c962 ("armv7m: disable
 icache before linux booting"), instruction cache is automatically
disable before linux booting. "icache off" from boot_sd command
becomes useless, remove it.
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

This flag is not used, remove it.
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

Since commit aa5e3e22 ("board: stm32: switch to DM STM32 timer")
SYS_CLK_FREQ is useless, remove it from stm32f4 and stm32f7 boards.
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

Use gd->bd->bi_dram[0].start initialized from DT instead of using
hardcoded CONFIG_SYS_SDRAM_BASE from config file.

Remove unused CONFIG_SYS_RAM_BASE and CONFIG_SYS_SDRAM_BASE defines.
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

In case the slow clock is not properly configured, the UTMI clock
cannot lock the PLL, because UPLLCOUNT will "wait X slow clock cycles".
In this case U-boot will loop indefinitely.
Added a timeout in this case, to start U-boot even if UTMI clock is
not enabled, so the user can use different media if needed, or investigate.
Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>

Move some configuration #defines that do not apply to other bcmstb
boards from bcmstb.h to bcm7445.h.
Signed-off-by: NThomas Fitzsimmons <fitzsim@fitzsim.org>

Move the contents of prior_stage.h into bcmstb.h to prevent a build
failure when bcmstb.h is #include'ed before the asm/arch symbolic link
is present.
Signed-off-by: NThomas Fitzsimmons <fitzsim@fitzsim.org>

Fix LibreSSL compilation for versions before v2.7.0.
Signed-off-by: NCaliph Nomble <nomble@palism.com>
Reviewed-by: NJonathan Gray <jsg@jsg.id.au>

%s/dumm /dummy /
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Implement get_size_of_partition() operation,
which is required by the latest upstream libavb [1].

[1] https://android.googlesource.com/platform/external/avb/+/android-p-preview-5Signed-off-by: NIgor Opaniuk <igor.opaniuk@linaro.org>
Acked-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NSam Protsenko <semen.protsenko@linaro.org>