Both LS1012A and LS1043A belong to FSL_LSCH2 and share some common
configurations. So put the common define under FSL_LSCH2 to increase
readability.
Signed-off-by: NGong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Add support to detect Cortex-A72 core for printing it out.
The Initiator Version of A72 core should be 0x4.
Signed-off-by: NAlison Wang <alison.wang@nxp.com>
Signed-off-by: NMingkai Hu <mingkai.hu@nxp.com>
Signed-off-by: NGong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Add ls1043aqds_lpuart_defconfig to file list.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Add ls2080aqds_qspi_defconfig to file list.
Signed-off-by: NYork Sun <york.sun@nxp.com>

Add SD secure boot target for ls1021atwr.
Implement board specific spl_board_init() to setup CAAM stream ID and
corresponding stream ID in SMMU. Change the u-boot size defined by a
macro for copying the main U-Boot by SPL to also include the u-boot
Secure Boot header size as header is appended to u-boot image. So header
will also be copied from SD to DDR.
Reviewed-by: NAneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: NSumit Garg <sumit.garg@nxp.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Add support for reading bootscript and bootscript header from SD. Also
renamed macros *_FLASH to *_DEVICE to represent SD alongwith NAND and
NOR flash.
Reviewed-by: NAneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: NSumit Garg <sumit.garg@nxp.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Override jump_to_image_no_args function to include validation of
u-boot image using spl_validate_uboot before jumping to u-boot image.
Also define macros in SPL framework to enable crypto operations.
Reviewed-by: NAneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: NSumit Garg <sumit.garg@nxp.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Enable rsa signature verification in SPL framework before relocation for
verification of main u-boot.
Reviewed-by: NAneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: NSumit Garg <sumit.garg@nxp.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Remove Soc specific defines and use generic chasis specific defines
for USB controller base address mapping.
Signed-off-by: NRajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Due to a oversight in testing, the initialization of the recently
introduced Freescale I2C DM driver works only for 36 bit mode of e.g.
the MPC85XX SoCs (specifically, if the physical addresses are 64 bit
wide and the DT addresses 32 bit wide).

This patch corrects the initialization so that it will work in a more
general setting.
Signed-off-by: NMario Six <mario.six@gdsys.cc>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Deassert resets and enable clock signals of xHCI blocks if the
corresponding CONFIG is enabled.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

This has the same silicon die as PH1-LD20, but includes DRAM chips
in its package.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

I need to add more board attributes, so the "flags" member will be
handier than separate boolean ones.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Sync register macros with Linux code.  This will be helpful to
develop the counterpart of Linux.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Clear the flag immediately before cache operation to not depend on
the previous state.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

This does not have much impact on behavior, but makes code look more
more like Linux.  The use of devm_ioremap() often helps to delete
.remove callbacks entirely.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

This downloads the same file twice for nothing.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

This is needed when booting Linux without ARM Trusted Firmware.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

On these two boards, the serial0 is used for inter-chip connection,
so cannot be used for login console.  The serial2 is used instead
for them, but it is tedious to use because upper level deployment
projects must switch login console per board.

[ Linux commit: 2a4a2aadbaad9dffdb564a2895348f3d8e825416 ]
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Getting this error:
Zynq> sb load hostfs - 100
/home/monstr/data/disk/u-boot/build-zynq_zc706/test.fit
Unknown command 'sb' - try 'help'

because sb command is present only for Sandbox
obj-$(CONFIG_SANDBOX) += host.o

that's why mark this test to be run only at Sandbox
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Commit 17c29873 introduces an undesired dependency on CONFIG_SPL_LOAD_FIT
when building U-Boot for AM57xx and DRA7xx high-security (HS) devices that
causes the build to break when that option is not active. Fix this issue
by only building the u-boot_HS.img target when building U-Boot into an
actual FIT image.
Signed-off-by: NAndreas Dannenberg <dannenberg@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

Commit e29878fc introduces an undesired dependency on CONFIG_SPL_LOAD_FIT
when building U-Boot for AM43xx high-security (HS) devices that causes the
build to break when that option is not active. Fix this issue by only
building the u-boot_HS.img target when building U-Boot into an actual
FIT image.
Signed-off-by: NAndreas Dannenberg <dannenberg@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

It looks typo error.
Not CPU15, CP15(CoProcessor15)
Signed-off-by: Nyeongjun Kim <iam.yeongjunkim@gmail.com>

In raw mode a full sector is to be read even if image covers part of
a sector. Number of sectors are calculated as ROUND_UP(size)/sec_size by FIT
framework. This calculation assumes that image is at the 0th offset of a sector,
which is not true always in FIT case. So, include the image offset while
calculating number of sectors.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

When signing images, we repeatedly call fit_add_file_data() with
successively increasing size values to include the keys in the DTB.

Unfortunately, if large keys are used (such as 4096 bit RSA keys), this
process fails sometimes, and mkimage needs to be called repeatedly to
integrate the keys into the DTB.

This is because fit_add_file_data actually returns the wrong error
code, and the loop terminates prematurely, instead of trying again with
a larger size value.

This patch corrects the return value by fixing the return value of
fdt_add_bignum, fixes a case where an error is masked by a unconditional
setting of a return value variable, and also removes a error message,
which is misleading, since we actually allow the function to fail. A
(hopefully helpful) comment is also added to explain the lack of error
message.

This is probably related to 1152a05e ("tools: Correct error handling in
fit_image_process_hash()") and the corresponding error reported here:

https://www.mail-archive.com/u-boot@lists.denx.de/msg217417.htmlSigned-off-by: NMario Six <mario.six@gdsys.cc>

When signing images, we repeatedly call fit_add_file_data() with
successively increasing size values to include the keys in the DTB.

Unfortunately, if large keys are used (such as 4096 bit RSA keys), this
process fails sometimes, and mkimage needs to be called repeatedly to
integrate the keys into the DTB.

This is because fit_add_file_data actually returns the wrong error
code, and the loop terminates prematurely, instead of trying again with
a larger size value.

This patch corrects the return value and also removes a error message,
which is misleading, since we actually allow the function to fail. A
(hopefully helpful) comment is also added to explain the lack of error
message.

This is probably related to 1152a05e ("tools: Correct error handling in
fit_image_process_hash()") and the corresponding error reported here:

https://www.mail-archive.com/u-boot@lists.denx.de/msg217417.htmlSigned-off-by: NMario Six <mario.six@gdsys.cc>

Without this, the test fails if the test is run with a cwd other than the
root of the U-Boot source tree.

Fixes: 8729d582 ("test: Convert the vboot test to test/py")
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

As part of the startup process for boards using the SPL, the
meaning of board_init_f changed such that it should return normally
rather than calling board_init_r directly. (see
db910353 )
This was fixed in 32-bit arm, but broke when SPL was added to
64 bit arm. This fixes crt0_64 so that it calls board_init_r
during the SPL and removes the direct call from board_init_f
from the arm SPL example.
Signed-off-by: NJeremy Hunt <Jeremy.Hunt@DEShawResearch.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Tracing the arguments has been helpful for pinpointing overflows.

Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NAlexander Graf <agraf@suse.de>

Try to avoid adhoc iteration of the environment. Reuse fw_getenv
to find the variables that should be printed. Only use open-coded
iteration when printing all variables.
For backwards compatibility, keep emitting a newline when
printing with value_only.
Signed-off-by: NAndreas Fenkart <andreas.fenkart@digitalstrom.com>

forward declaration not needed when re-ordered
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NAndreas Fenkart <andreas.fenkart@digitalstrom.com>

there are two groups of functions:
- application ready tools: fw_setenv/fw_getenv/fw_parse_script
these are used, when creating a single binary containing multiple
tools (busybox like)
- file access like: open/read/write/close
above functions are implemented on top of these. applications
can use those to modify several variables without creating a
temporary batch script file
tested with "./scripts/kernel-doc -html -v tools/env/fw_env.h"
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NAndreas Fenkart <andreas.fenkart@digitalstrom.com>

On most platforms the print_fpga_state function is never called.  Only
on dlvision-10g do we, so in that case inline it.  Drop it from
everywhere else to avoid extra strings.
Signed-off-by: NTom Rini <trini@konsulko.com>
Acked-by: NReinhard Pfau <reinhard.pfau@gdsys.cc>
Acked-by: NDirk Eibach <dirk.eibach@gdsys.cc>

A negative value for the offset is treated as a backwards offset for
from the end of the device/partition for block devices. This aligns
the behavior of the config file with the syntax of CONFIG_ENV_OFFSET
where the functionality has been introduced with
commit 5c088ee8 ("env_mmc: allow negative CONFIG_ENV_OFFSET").
Signed-off-by: NStefan Agner <stefan.agner@toradex.com>

Currently flash_read completes a crucial part of the environment
device configuration, the device type (mtd_type). This is rather
confusing as flash_io calls flash_read conditionally, and one might
think flash_write, which also makes use of mtd_type, gets called
before flash_read. But since flash_io is always called with O_RDONLY
first, this is not actually the case in reality.

However, it is much cleaner to complete and verify the config early
in parse_config. This also prepares the code for further extension.
Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
Reviewed-by: Andreas Fenkart

Partitions on the iso el torito partition table interpreter
only start from partition 1. So when printing out the tables,
let's also start counting at 1.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Implement spl_start_uboot to let Falcon mode work.
Signed-off-by: NLadislav Michl <ladis@linux-mips.org>
Reviewed-by: NHeiko Schocher <hs@denx.de>
Acked-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>

Signed-off-by: NLadislav Michl <ladis@linux-mips.org>

Convert IGEP board to use UBI volumes for U-Boot, its environment and
kernel. With exception of first four sectors read by SoC boot
ROM whole (One)NAND is UBI managed.
Also merge NAND and OneNAND defconfigs as now one binary can serve
both flashes.
As code is too big now, drop CONFIG_SPL_EXT_SUPPORT to make it fit.
Signed-off-by: NLadislav Michl <ladis@linux-mips.org>
Reviewed-by: NHeiko Schocher <hs@denx.de>

Signed-off-by: NLadislav Michl <ladis@linux-mips.org>