- 10 6月, 2015 6 次提交
-
-
由 Andreas Bießmann 提交于
I have this board at work, so I can trun tests on it. Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Andreas Bießmann 提交于
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Andreas Bießmann 提交于
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Andreas Bießmann 提交于
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Andreas Bießmann 提交于
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Andreas Bießmann 提交于
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
- 09 6月, 2015 4 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Adam YH Lee 提交于
AM335x-based 'Gumstix Pepper' SBCs and variants use different types of RAM (DDR2 vs DDR3 with DDR3 being the default). Detect the board type by reading the factory-programmed EEPROM [1] and use this to select any runtime boot options such as RAM type. [1] http://elinux.org/BeagleBoardPinMux#List_of_Vendor_and_Device_IDsSigned-off-by: NAdam YH Lee <adam.yh.lee@gmail.com> Signed-off-by: NAsh Charles <ashcharles@gmail.com>
-
由 Stefan Roese 提交于
This patch adds the feature to only stop the autobooting, and therefor boot into the U-Boot prompt, when the input string / password matches a values that is encypted via a SHA256 hash and saved in the environment. This feature is enabled by defined these config options: CONFIG_AUTOBOOT_KEYED CONFIG_AUTOBOOT_STOP_STR_SHA256 Signed-off-by: NStefan Roese <sr@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Stefan Roese 提交于
This patch moves the following config options to Kconfig: CONFIG_AUTOBOOT_KEYED CONFIG_AUTOBOOT_PROMPT CONFIG_AUTOBOOT_DELAY_STR CONFIG_AUTOBOOT_STOP_STR AUTOBOOT_KEYED_CTRLC Signed-off-by: NStefan Roese <sr@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org> [trini: Drop ip04 and pm9263 configs/ additions, those boards previously set CONFIG_AUTOBOOT_PROMPT but never used it, re-run savedefconfig over all boards that did change. Make digsy_mtc_* string include seconds to match others and not warn. ] Signed-off-by: NTom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
-
- 08 6月, 2015 19 次提交
-
-
由 Stefan Roese 提交于
These defines for a 2nd autoboot stop and delay string are nearly unused. Only sc3 defines CONFIG_AUTOBOOT_DELAY_STR2. And a patch to remove this most likely unmaintained board is also posted to the list. By removing these defines the code will become cleaner and moving the remaining compile options to Kconfig will get easier. Signed-off-by: NStefan Roese <sr@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
-
由 Stefan Roese 提交于
I might have missed something, but I failed to use the escape char '\' in strings. To pass a printf format string like "foo %d bar\n" via Kconfig to the code. Right now its not possible to use the escape character '\' in Kconfig string values correctly to e.g. set this string value "test output\n". The '\n' will be converted to 'n'. The current implementation removes some of the '\' chars from the input string in conf_set_sym_val(). Examples: '\' -> '' '\\' -> '\' '\\\' -> '\' '\\\\' -> '\\' ... And then doubles the backslash chars in the output string in sym_escape_string_value(). Example: '\' -> '' -> '' '\\' -> '\' -> '\\' '\\\' -> '\' -> '\\' '\\\\' -> '\\' -> '\\\\' ... As you see in these examples, its impossible to generate a single '\' charater in the output string as its needed for something like '\n'. This patch now changes this behavior to not drop some backslashes in conf_set_sym_val() and to not add new backslashes in the resulting output string. Removing the function sym_escape_string_value() completely as its not needed anymore. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
-
-
由 Stefano Babic 提交于
max_freq in print_cpuinfo is used only with imx6. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Christian Gmeiner 提交于
On this bus there is a EEPROM containing EDID and ddr3 calibration information. Signed-off-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
-
由 Christian Gmeiner 提交于
Make it possible to use the i2c bus in SPL. Signed-off-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
-
由 Sanchayan Maity 提交于
Add IOMUX for the pad used as USB pen. This needs to be driven low for the Iris and Viola boards where it is pulled up high by default. This is required for the USB host functionality to work on these boards. Use the board specific weak initialisation function, to drive the pin low which would be called on "usb start". Signed-off-by: NSanchayan Maity <maitysanchayan@gmail.com>
-
由 Sanchayan Maity 提交于
Add a weak function board_ehci_hcd_init which can be used by the board file for board specific initialisation. Signed-off-by: NSanchayan Maity <maitysanchayan@gmail.com>
-
由 Bhuvanchandra DV 提交于
Most of the drivers available for Vybrid are not yet converted to OF model to use device tree model, only few drivers like SPI and GPIO drivers use device trees. Add separate defconfig for who needs to use device tree model. Later this can be integrated to single defconfig. Acked-by: NStefan Agner <stefan@agner.ch> Signed-off-by: NBhuvanchandra DV <bhuvanchandra.dv@toradex.com>
-
由 Bhuvanchandra DV 提交于
Signed-off-by: NBhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: NStefan Agner <stefan@agner.ch>
-
由 Bhuvanchandra DV 提交于
Add device tree files for Freescale Vybrid platform and Toradex Colibri VF50, VF61 modules. Device tree files are taken from upstream Kernel. Removed the stuff which are not used/supported yet in U-Boot. Signed-off-by: NBhuvanchandra DV <bhuvanchandra.dv@toradex.com>
-
由 Bhuvanchandra DV 提交于
Add iomux definitions for DSPI second instance. Signed-off-by: NBhuvanchandra DV <bhuvanchandra.dv@toradex.com>
-
由 Bhuvanchandra DV 提交于
Signed-off-by: NBhuvanchandra DV <bhuvanchandra.dv@toradex.com>
-
由 Bhuvanchandra DV 提交于
Acked-by: NStefan Agner <stefan@agner.ch> Signed-off-by: NBhuvanchandra DV <bhuvanchandra.dv@toradex.com>
-
由 Bhuvanchandra DV 提交于
Inorder to use the pins as GPIO, apart from setting the alt-function, pinmuxing need to be done, this patch adds pinmux entries of few GPIOs. Acked-by: NStefan Agner <stefan@agner.ch> Signed-off-by: NBhuvanchandra DV <bhuvanchandra.dv@toradex.com>
-
由 Bhuvanchandra DV 提交于
Add GPIO driver support to Freescale VF610 Signed-off-by: NBhuvanchandra DV <bhuvanchandra.dv@toradex.com>
-
由 Bhuvanchandra DV 提交于
Like SPI and I2C few GPIO controllers also have multiple chip instances. This patch adds the flag 'DM_UC_FLAG_SEQ_ALIAS' in gpio_uclass driver to control device sequence numbering. By defalut the dev->r_seq for gpio_uclass will alwalys returns -1, which leads the gpio driver probe failure when using the driver with device trees. Signed-off-by: NBhuvanchandra DV <bhuvanchandra.dv@toradex.com>
-
由 Fabio Estevam 提交于
Commit 81830581 ("imx6: centralise common boot options in mx6_common.h") broke boot on mx6sl and mx6sx by assuming that all mx6 SoCs use the same LOADADDR/SYS_TEXT_BASE range, which is not correct. DDR on mx6sx/mx6sl starts at 0x80000000. Adjust LOADADDR/SYS_TEXT_BASE to the proper values for mx6sx/mx6sl, so that these SoCs can boot again. Also, TQMA6 requires a custom CONFIG_SYS_TEXT_BASE value, so move its setting prior to the inclusion of mx6_common.h. Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
-
由 Fabio Estevam 提交于
There are two revisions of wandboard: version B1 and C1. Add the revision detection support, so that the correct dtb file can be automatically loaded. Based on the patch from Richard Hu <hakahu@gmail.com>. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Reviewed-by: NStefano Babic <sbabic@denx.de> Tested-By: NVagrant Cascadian <vagrant@aikidev.net>
-
- 06 6月, 2015 5 次提交
-
-
由 Hans de Goede 提交于
This fixes the following compiler warning: In file included from tools/common/image-fit.c:1:0: ./tools/../common/image-fit.c: In function ‘fit_conf_print’: ./tools/../common/image-fit.c:1470:27: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] (const char **)&uname) > 0; Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
-
由 Hans de Goede 提交于
Select CONFIG_CMD_NET and CONFIG_CMD_SETEXPR by default rather then needing to have this in every sunxi defconfig file. This also fixes the Merrii_A80_Optimus defconfig no longer building. Cc: Maxin B. John <maxin.john@enea.com> Reported-by: NMaxin B. John <maxin.john@enea.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Hans de Goede 提交于
Add and use a proper dts for the ga10h a33 based tablet, as submitted upstream. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
-
- 05 6月, 2015 3 次提交
-
-
-
由 Paul Kocialkowski 提交于
This instroduces comments that explain the purpose, parameters and return codes of a few fdt support functions, that are used to fill the fdt. Signed-off-by: NPaul Kocialkowski <contact@paulk.fr> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Paul Kocialkowski 提交于
Before device-tree, the device serial number used to be passed to the kernel using ATAGs (on ARM). This is now deprecated and all the handover to the kernel should now be done using device-tree. Thus, this passes the serial-number property to the kernel using the serial-number property of the root node, as expected by the kernel. The serial number is a string that somewhat represents the device's serial number. It might come from some form of storage (e.g. an eeprom) and be programmed at factory-time by the manufacturer or come from identification bits available in e.g. the SoC. Signed-off-by: NPaul Kocialkowski <contact@paulk.fr> Reviewed-by: NSimon Glass <sgj@chromium.org>
-
- 04 6月, 2015 3 次提交
-
-
由 Hans de Goede 提交于
Rename the Astar_MID756 to Et_q8_v1_6 to match the kernel dts name. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Hans de Goede 提交于
Copy over all the latest dts changes from mripard/sunxi/dt-for-4.2 , this gives us a proper dtsi file for the A33 rather then abusing sun8i-a23.dtsi for this. And this replaces our minimal (dummy) sun7i-a20-mk808c and sun8i-a33-astar-mid756 dts files with proper ones. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Hans de Goede 提交于
Add "allwinner,sun8i-a33-pinctrl", this is used by the latest upstream linux sunxi dts files. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-