Signed-off-by: NVasili Galka <vasili@visionmap.com>

As ppc4xx currently only supports the deprecated nand_spl infrastructure
and nobody seems to have time / resources to port this over to the newer
SPL infrastructure, lets remove NAND booting completely.

This should not affect the "normal", non NAND-booting ppc4xx platforms
that are currently supported.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Tirumala Marri <tmarri@apm.com>
Cc: Matthias Fuchs <matthias.fuchs@esd.eu>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Tested-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

There was wrong phy_mask for AR8021 device,
so the AR8021 can't be probed correctly.
Changed it from 0x4fffff to 0x4ffff0.
Signed-off-by: NHaijun Zhang <Haijun.Zhang@freescale.com>

config.tmp is never generated
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Acked-by: NMichal Simek <michal.simek@xilinx.com>

The unit-test for hush's "test -e" currently relies upon being run in
the U-Boot build directory, because it tests for the existence of a file
that exists in that directory.

Fix this by explicitly creating the file we use for the existence test,
and deleting it afterwards so that multiple successive unit-test
invocations succeed. This required adding an os.c function to erase
files.
Reported-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NStephen Warren <swarren@wwwdotorg.org>

The following shell command fails:

if test -z "$x"; then echo "zero"; else echo "non-zero"; fi

(assuming $x does not exist, it prints "non-zero" rather than "zero").

... since "$x" expands to nothing, and the argument is completely
dropped, causing too few to be passed to -z, causing cmd_test() to
error out early.

This is because when variable expansions are processed by make_string(),
the expanded results are concatenated back into a new string. However,
no quoting is applied when doing so, so any empty variables simply don't
generate any parameter when the combined string is parsed again.

Fix this by explicitly replacing quoting any argument that was originally
quoted when re-generating a string from the already-parsed argument list.

This also fixes loss of whitespace in commands such as:

setenv space " "
setenv var " 1${space}${space} 2 "
echo ">>${var}<<"
Reported-by: NRussell King <linux@arm.linux.org.uk>
Acked-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NStephen Warren <swarren@wwwdotorg.org>

Delete the temporary variables that are used to save unit-test results
from the environment after running the test. This prevents polluting
the environment, or growing it too much.
Signed-off-by: NStephen Warren <swarren@wwwdotorg.org>
Acked-by: NSimon Glass <sjg@chromium.org>

For Ethernet/USB RX packets, the ASIX HW pads odd-sized packets so that
they have an even size. Currently, asix_recv() does remove this padding,
and asic_send() adds equivalent padding in the TX path. However, the HW
does not appear to need this packing for TX packets in practical testing
with "ASIX Elec. Corp. AX88x72A 000001" Vendor: 0x0b95 Product 0x7720
Version 0.1. The Linux kernel does no such padding for the TX path.

Remove the padding from the TX path:

* For consistency with the Linux kernel.
* NVIDIA has a Tegra simulator which validates that the length of USB
  packets sent to an ASIX device matches the packet length value inside
  the packet data. Having U-Boot and the kernel do the same thing when
  creating the TX packets simplifies the simulator's validation.

Cc: Lucas Stach <dev@lynxeye.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Acked-by: NMarek Vasut <marex@denx.de>
Tested-by: NMarek Vasut <marex@denx.de>
Tested-by: NGerhard Sittig <gsi@denx.de>

omap_elm.h is a generic header used by OMAP ELM driver for all TI platfoms.
Hence this file should be present in generic folder instead of architecture
specific include folder.
Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5
Signed-off-by: NPekon Gupta <pekon@ti.com>

omap_gpmc.h is a generic header used by OMAP NAND driver for all TI platfoms.
Hence this file should be present in generic folder instead of architecture
specific include folder.
Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5
Signed-off-by: NPekon Gupta <pekon@ti.com>

Each SoC platform (AM33xx, OMAP3, OMAP4, OMAP5) has its own copy of GPMC related
defines and declarations scattered in SoC platform specific header files
like include/asm/arch-xx/cpu.h
However, GPMC hardware remains same across all platforms thus this patch merges
GPMC data scattered across different arch-xx specific header files into single
header file include/asm/arch/omap_gpmc.h

Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5
Signed-off-by: NPekon Gupta <pekon@ti.com>

OMAP NAND driver can detect Page-size and OOB-size of NAND device from ONFI
params or nand_id[] table. And based on that it defines ECC layout.
This patch
1) removes following board configs used for defining NAND ECC layout
	- GPMC_NAND_ECC_LP_x16_LAYOUT (for large page x16 NAND)
	- GPMC_NAND_ECC_LP_x8_LAYOUT  (for large page x8 NAND)
	- GPMC_NAND_ECC_SP_x16_LAYOUT (for small page x16 NAND)
	- GPMC_NAND_ECC_SP_x8_LAYOUT  (for small page x8 NAND)

2) removes unused #defines in common omap_gpmc.h depending on above configs

Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5
Signed-off-by: NPekon Gupta <pekon@ti.com>

Currently there are two sets of omap_gpmc.h header files
(a) arch/arm/include/asm/omap_gpmc.h
 common header file for all platforms, containing defines and declarations used
 by GPMC NAND driver.

(b) arch/arm/include/asm/arch-xx/omap_gpmc.h
 SoC platform specific header file containing defines like ECC layout.

This patch removes platform specific arch-xx/omap_gpmc.c because:
 - GPMC hardware engine is common for all SoC platforms hence only (a) is enough
 - ECC layout is now defined in omap_nand.c driver itself based on ecc-scheme
   selected. Hence all ECC layout declarations in (b) are redundant.

Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5
Signed-off-by: NPekon Gupta <pekon@ti.com>

README.malta referred to board/malta, but malta has now been moved
within board/imgtec/, so correct the path.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Cc: Paul Burton <paul.burton@imgtec.com>

Linux MIPS uses asm-generic/int-ll64.h in asm/types.h.
Thus u64 and __u64 are defined as unsigned long long. Port this
over to U-Boot.
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>

There are no source files in board/synopsys/arcangel4/
directory.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>

U-Boot has compelled all boards to have
board/${BOARD}/ or board/${VENDOR}/${BOARD}/ directory.

Sometimes it does not seem suitable for some boards,
for example Sandbox. (Is it a board?)

And arcangel4 board has nothing to compile
under the board directory.

This commit makes the build system more flexible:
If '<none>' is given to the 6th column (=Board name) of boards.cfg,
Kbuild will not descend into the board directory.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

LOGO_BMP was never overwritten by board-specific or
vendor-specific logos.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Reported-by: NBo Shen <voice.shen@atmel.com>
Tested-by: NBo Shen <voice.shen@atmel.com>

Programs in tools/ directory are usually built for the host.
But some of them (mkimage, dumpimge, gen_eth_addr, etc.) are
useful on the target OS too.

Actually, prior to Kbuild, U-Boot could build tools for
the target like follows:

  $ make <target_board>_config
  $ export CROSS_COMPILE=<cross_gcc_prefix>
  $ make HOSTCC=${CROSS_COMPILE}gcc HOSTSTRIP=${CROSS_COMPILE}strip tools

In Kbuild, we can no longer replace HOSTCC at the command line.

In order to get back that feature, this commit adds "cross-tools" target.

Usage:

  Build tools for the host
  $ make CROSS_COMPILE=<cross_gcc_prefix> tools

  Build tools for the target
  $ make CROSS_COMPILE=<cross_gcc_prefix> cross_tools

Besides, "make cross_tools" strip tools programs because we
generally expect smaller storages on embedded systems.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Reported-by: NHeiko Schocher <hs@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Tom Rini <trini@ti.com>
Tested-by: NHeiko Schocher <hs@denx.de>
Acked-by: NHeiko Schocher <hs@denx.de>

The top Makefile must export HOST_TOOLS_ALL to use it
in tools/Makefile.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: NHeiko Schocher <hs@denx.de>
Acked-by: NHeiko Schocher <hs@denx.de>

config.tmp is not there.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

Ignore
  - board/cray/L1/bootscript.{c|image}
  - board/matrix_vision/mvblm7/bootscript.img
  - board/maxtir_vision/mvsmr/bootscript.img
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Andre Schwarz <andre.schwarz@matrix-vision.de>

The same outputs are generated with or without -I$(TOPDIR)/board.
I cannot understand why it is necessary. Remove.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Daniel Hellstrom <daniel@gaisler.com>

The syntax
  CROSS_COMIPLE ?= <cross_compiler_prefix>
does not work because config.mk is parsed after
exporting CROSS_COMPILE.

Like Linux Kernel's arch/$(ARCH)/Makefile,
we must write as follows:

  ifeq ($(CROSS_COMPILE),)
  CROSS_COMPILE := <cross_compiler_prefix>
  endif
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

We had switched to Kbuild so now we can specify
PLATFORM_LIBS/PLATFORM_LIBGCC with relative path.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NTom Rini <trini@ti.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Tested-by: NSimon Glass <sjg@chromium.org>

Update to v3.14-rc4's version of checkpatch.pl.  In doing so we drop the
changes to top_of_kernel_tree() as we pass in --no-tree and drop our
changes about MAINTAINERS as that's for reporting checkpatch.pl problems
itself (and upstream has said they'll reword this section to be
clearer).
Signed-off-by: NTom Rini <trini@ti.com>

Add 64-bit data for memory commands, such as md, mw, mm, cmp. The new
size ".q " is introduced.

For 64-bit architecture, 64-bit data is enabled by default, by detecting
compiler __LP64__. It is optional for other architectures.
Signed-off-by: NYork Sun <yorksun@freescale.com>

This documentation pertains to the planned implementation of driver model
in U-Boot for each subsystem, but it has not been superseded. It is
probably better to have this documentation in the source code for each
subsystem where possible, so that docbook will pick it up. Where this does
not make sense, new documentation can be placed in some suitable file in
doc/driver-model.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Now that named GPIO banks are supported, along with a way of obtaining
the status of a GPIO (input or output), we can provide an enhanced
GPIO command for driver model. Where the driver provides its own operation
for obtaining the GPIO state, this is used, otherwise a generic version
is sufficient.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Convert sandbox over to use driver model GPIOs.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Add driver model support for GPIOs. Since existing GPIO drivers do not use
driver model, this feature must be enabled by CONFIG_DM_GPIO. After all
GPO drivers are converted over we can perhaps remove this config.

Tests are provided for the sandbox implementation, and are a sufficient
sanity check for basic operation.

The GPIO uclass understands the concept of named banks of GPIOs, with each
GPIO device providing a single bank. Within each bank the GPIOs are numbered
using an offset from 0 to n-1. For example a bank named 'b' with 20
offsets will provide GPIOs named b0 to b19.

Anonymous GPIO banks are also supported, and are just numbered without any
prefix.

Each time a GPIO driver is added to the uclass, the GPIOs are renumbered
accordinging, so there is always a global GPIO numbering order.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NPavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: NViktor Křivák <viktor.krivak@gmail.com>
Signed-off-by: NTomas Hlavacek <tmshlvck@gmail.com>

As an example of how to write a uclass and a driver, provide a demo version
of each, accessible through the 'demo' command.

To use these with driver model, define CONFIG_CMD_DEMO and CONFIG_DM_DEMO.

The two demo drivers are enabled with CONFIG_DM_DEMO_SIMPLE and
CONFIG_DM_DEMO_SHAPE.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NPavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: NViktor Křivák <viktor.krivak@gmail.com>
Signed-off-by: NTomas Hlavacek <tmshlvck@gmail.com>

This command is not required for driver model operation, but can be useful
for testing. It provides simple dumps of internal data structures.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NPavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: NViktor Křivák <viktor.krivak@gmail.com>
Signed-off-by: NTomas Hlavacek <tmshlvck@gmail.com>

Add some tests of driver model functionality. Coverage includes:

- basic init
- binding of drivers to devices using platform_data
- automatic probing of devices when referenced
- availability of platform data to devices
- lifecycle from bind to probe to remove to unbind
- renumbering within a uclass when devices are probed/removed
- calling driver-defined operations
- deactivation of drivers when removed
- memory leak across creation and destruction of drivers/uclasses
- uclass init/destroy methods
- automatic probe/remove of children/parents when needed

This function is enabled for sandbox, using CONFIG_DM_TEST.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Make driver model available after relocation, by setting up data structures
and scanning for devices using compiled-in platform_data and (when available)
the device tree.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Use driver model in sandbox to permit running of driver model unit test.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Add driver model functionality for generic board.

This includes data structures and base code for registering devices and
uclasses (groups of devices with the same purpose, e.g. all I2C ports will
be in the same uclass).

The feature is enabled with CONFIG_DM.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NPavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: NViktor Křivák <viktor.krivak@gmail.com>
Signed-off-by: NTomas Hlavacek <tmshlvck@gmail.com>

This adds a README to help with understanding of this series.
Signed-off-by: NSimon Glass <sjg@chromium.org>