提交 6aff0509 编写于 作者: P pekon gupta 提交者: Scott Wood

mtd: nand: omap: move omap_gpmc.h from arch/arm/include/asm to drivers/mtd/nand

omap_gpmc.h is a generic header used by OMAP NAND driver for all TI platfoms.
Hence this file should be present in generic folder instead of architecture
specific include folder.
Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5
Signed-off-by: NPekon Gupta <pekon@ti.com>
上级 51d192c4
......@@ -10,7 +10,7 @@
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
#include <asm/omap_gpmc.h>
#include <linux/mtd/omap_gpmc.h>
#include <asm/arch/cpu.h>
#define BOARD_REV_ID 0x0
......
......@@ -7,7 +7,7 @@
*/
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
#include <asm/omap_gpmc.h>
#include <linux/mtd/omap_gpmc.h>
typedef struct {
u32 mtype;
......
......@@ -12,7 +12,7 @@
#include <asm/arch/clock.h>
#include <asm/io.h>
#include <asm/omap_common.h>
#include <asm/omap_gpmc.h>
#include <linux/mtd/omap_gpmc.h>
#include <asm/arch/mux_omap4.h>
DECLARE_GLOBAL_DATA_PTR;
......
......@@ -12,7 +12,7 @@
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/omap_common.h>
#include <asm/omap_gpmc.h>
#include <linux/mtd/omap_gpmc.h>
#include <asm/arch/clock.h>
DECLARE_GLOBAL_DATA_PTR;
......
......@@ -8,7 +8,6 @@
#include <twl4030.h>
#include <netdev.h>
#include <asm/gpio.h>
#include <asm/omap_gpmc.h>
#include <asm/io.h>
#include <asm/arch/mem.h>
#include <asm/arch/mmc_host_def.h>
......
......@@ -21,7 +21,6 @@
#include <asm/arch/mux.h>
#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
#include <asm/omap_gpmc.h>
#include <asm/gpio.h>
#include <asm/mach-types.h>
#include "overo.h"
......
......@@ -16,7 +16,7 @@
#include <common.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/omap_gpmc.h>
#include <linux/mtd/omap_gpmc.h>
#include <asm/omap_elm.h>
#include <asm/arch/hardware.h>
......
......@@ -9,7 +9,7 @@
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/arch/mem.h>
#include <asm/omap_gpmc.h>
#include <linux/mtd/omap_gpmc.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/bch.h>
#include <linux/compiler.h>
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册