- 27 12月, 2017 1 次提交
-
-
由 Masahiro Yamada 提交于
Freescale (NXP) boards have lots of defconfig files per board. I used "imply PANIC_HANG" for them. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 04 9月, 2017 4 次提交
-
-
由 Thomas Petazzoni 提交于
This commit removes definitions of CONFIG_SYS_BARGSIZE defined to be equal to CONFIG_SYS_CBSIZE in numerous configuration files. We remove such definitions in two situations: - CONFIG_SYS_CBSIZE is otherwise not defined in the board configuration file, which means the default value of CONFIG_SYS_CBSIZE == 256 applies. In this case, the default value of CONFIG_SYS_BARGSIZE == 512 (common/image.c) is suitable, as it is larger. - CONFIG_SYS_CBSIZE is defined in the board configuration file, but to a value equal or less than 512. In this case, the default value of CONFIG_SYS_BARGSIZE == 512 (common.image.c) is suitable, as it is equal or larger. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Thomas Petazzoni 提交于
Now that include/config_fallbacks.h define a sane fallback for CONFIG_SYS_MAXARGS, we can drop the definition of this constant in all configurations that were using the default value. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Thomas Petazzoni 提交于
Now that the fallback value of CONFIG_SYS_PBSIZE in include/config_fallbacks.h has been adjusted, remove its definition from a large number of board configuration files. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Thomas Petazzoni 提交于
Now that include/config_fallbacks.h define a sane fallback for CONFIG_SYS_CBSIZE, we can drop the definition of this constant in all configurations that were using the default value. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com> [trini: Drop <config.h> from stih410-b2260.h] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 12 8月, 2017 5 次提交
-
-
由 Christophe Leroy 提交于
This patch converts CONFIG_CMD_REGINFO to Kconfig Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Simon Glass 提交于
This option enables the 'pci enum' command. It is only enabled by a few board and these have not yet been converted to driver model, which always enables this command. It seems easiest to just remove this option. The affected boards can be converted to use driver model for PCI if needed. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_PCI Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Simon Glass 提交于
It does not seem worth having an option to enable another sub-command in this legacy driver. Drop this option so that the sub-command is always available. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_PCA953X Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
- 09 8月, 2017 1 次提交
-
-
由 Tom Rini 提交于
Reviewed-by: NJoe Hershberger <joe.hershberger@ni.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 01 8月, 2017 1 次提交
-
-
由 Tom Rini 提交于
Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the defconfig files. Tested-by: NAdam Ford <aford173@gmail.com> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 26 7月, 2017 1 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_ENV_IS_IN_FLASH Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 23 5月, 2017 2 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_IRQ Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_JFFS2 Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 22 5月, 2017 7 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_EEPROM CONFIG_CMD_EEPROM_LAYOUT CONFIG_EEPROM_LAYOUT_HELP_STRING Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com> [trini: Rework Kconfig logic slightly, define EEPROM location on TI eval platforms] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This is only used by one board and always set to 0x51. Drop this option. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Simon Glass 提交于
Now that dtt is gone, this is not used. Drop it. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This subsystem is quite old. It has been replaced with a driver-model version (UCLASS_THERMAL). Boards are free to convert to that if required, but here is a removal patch that could be applied in the meantime. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_DS4510 Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Simon Glass 提交于
This option enables a command in the driver. But the functions defined by the driver are not called anywhere else in U-Boot. So it does not seem useful to have this driver without its commands. Drop this option, move the header file out of the common include/ directory and make all the function static. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Simon Glass 提交于
This option is only used in one driver and two boards. It does not seem worth having the ability to remove this part of the support. Drop the option. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
- 01 5月, 2017 1 次提交
-
-
由 Chris Packham 提交于
Signed-off-by: NChris Packham <judge.packham@gmail.com> [trini: default y if DM_RTC, re-sync] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 20 3月, 2017 1 次提交
-
-
由 Philipp Tomsich 提交于
Move this in to Kconfig with a default of 115200. Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> [trini: Run moveconfig.py, reword commit slightly] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 05 1月, 2017 2 次提交
-
-
由 York Sun 提交于
Use option NUM_DDR_CONTROLLERS in ddr Kconfig and clean up existing usage in ls102xa and fsl-layerscape. Remove all powerpc macros in config header and board header files. Signed-off-by: NYork Sun <york.sun@nxp.com>
-
由 York Sun 提交于
Create driver/ddr/fsl/Kconfig and move existing options. Clean up existing macros. Signed-off-by: NYork Sun <york.sun@nxp.com> [trini: Migrate sbc8641d, xpedite537x and MPC8536DS, run a moveconfig.py -s] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 03 12月, 2016 2 次提交
-
-
由 York Sun 提交于
Clean up existing definitions and drop from white list. Signed-off-by: NYork Sun <york.sun@nxp.com>
-
由 York Sun 提交于
Move default value definitions to Kconfig SYS_CCSRBAR_DEFAULT. Signed-off-by: NYork Sun <york.sun@nxp.com>
-
- 24 11月, 2016 1 次提交
-
-
由 York Sun 提交于
Replace CONFIG_MPC8641 with ARCH_MPC8641 in Kconfig and clean up existing macros. Signed-off-by: NYork Sun <york.sun@nxp.com>
-
- 28 10月, 2016 2 次提交
-
-
由 Bin Meng 提交于
Introduce CONFIG_PCI_PNP in Kconfig and move over boards' defconfig to use that. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com> [trini: Re-generate configs and include/configs/ changes] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Add 'PCI' as a menu option and migrate all existing users. Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NStephen Warren <swarren@nvidia.com>
-
- 12 10月, 2016 1 次提交
-
-
由 Lokesh Vutla 提交于
Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 22 7月, 2016 1 次提交
-
-
由 Scott Wood 提交于
Loading the fdt at 0xc00000 fails if the uncompressed kernel image is greater than 12 MiB, which is quite common with modern kernels and multiplatform defconfigs. Move fdtaddr to 0x1e00000 which is just under the ramdiskaddr on most targets. Signed-off-by: NScott Wood <oss@buserror.net> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Dirk Eibach <eibach@gdsys.de> Cc: Andy Fleming <afleming@gmail.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 10 6月, 2016 1 次提交
-
-
由 Heiko Schocher 提交于
move CONFIG_BOOTDELAY into a Kconfig option. Used for this purpose the moveconfig.py tool in tools. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
- 04 5月, 2016 1 次提交
-
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
- 26 4月, 2016 3 次提交
-
-
由 Tom Rini 提交于
Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 15 3月, 2016 2 次提交
-
-
由 Simon Glass 提交于
There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing boards. Signed-off-by: NSimon Glass <sjg@chromium.org>
-