- 27 12月, 2017 1 次提交
-
-
由 Masahiro Yamada 提交于
Freescale (NXP) boards have lots of defconfig files per board. I used "imply PANIC_HANG" for them. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 21 12月, 2017 2 次提交
-
-
-
由 Andy Shevchenko 提交于
FLIS IP since now gets its own ACPI ID. Drop PRP0001 workaround in favour of official ACPI HID. Corresponding kernel commit dabd4bc6de2b pinctrl: intel: merrifield: Introduce ACPI device table in the pin control subsystem tree [1] targeting v4.16. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/commit/?h=for-next&id=dabd4bc6de2bReviewed-by: NBin Meng <bmeng.cn@gmail.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
- 19 12月, 2017 22 次提交
-
-
-
-
由 Emmanuel Vadot 提交于
When adding a partition, set the logical_partition member in the media structure as mandated by the UEFI spec. Signed-off-by: NEmmanuel Vadot <manu@freebsd.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Sean Nyekjaer 提交于
This spi-nor is 4Mbit/512KB Fixes: b4fbcbc5 ("mtd/spi: add support for is25lq040b") Signed-off-by: NSean Nyekjaer <sean.nyekjaer@prevas.dk> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
由 Jagan Teki 提交于
Order sun50i-h5-orangepi-prime.dts nodes in alphabetic Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Jagan Teki 提交于
Now FASTBOOT_FLASH is auto select for sunxi platform, so drop explicit addition. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Jagan Teki 提交于
The default value of CONFIG_SYS_BOOTM_LEN, 0x800000, causes error when uncompressing Image.gz out of FIT image. Uncompressing Kernel Image ... Error: inflate() returned -5 Image too large: increase CONFIG_SYS_BOOTM_LEN and loading Image out of FIT image. Loading Kernel Image ... Image too large: increase CONFIG_SYS_BOOTM_LEN Must RESET board to recover Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
-
-
由 Heiko Schocher 提交于
When booting a itb file with a Ramdisk on a imx6 based board, U-Boot drops the warning: Loading Kernel Image ... OK Loading Ramdisk to 4ecf1000, end 4ef8b11f ... \ CACHE: Misaligned operation at range [4ecf1000, 4ef8b11f] Fix it! Signed-off-by: NHeiko Schocher <hs@denx.de> Tested-by: NAyoub Zaki <hs@denx.de>
-
由 Sam Protsenko 提交于
Use dfu_alt_info_emmc variable from include/environment/ti/dfu.h file. It was probably overlooked when extracting DFU variables to mentioned file. This patch fixes DFU on BeagleBone Black, so that we can use commands like ones below to upgrade various images on eMMC: => setenv dfu_alt_info $dfu_alt_info_emmc => dfu 0 mmc 1 $ dfu-util -D MLO -a MLO.raw $ dfu-util -D u-boot.img -a u-boot.img.raw Without this patch, the user is forced to assign the value to dfu_alt_info_emmc manually, which contradicts with instructions [1]. [1] http://processors.wiki.ti.com/index.php/Linux_Core_U-Boot_User%27s_GuideSigned-off-by: NSam Protsenko <semen.protsenko@linaro.org> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com> Reviewed-by: NLukasz Majewski <lukma@denx.de>
-
由 Jerome Brunet 提交于
This patch is ported from the Linux patch posted at [1] and applied to net tree as commit f1e2400a80ff. The purpose of this change is to fix the incorrect detection of the link partner (LP) advertised capabilities which sometimes happens with this PHY (roughly 1 time in a dozen) This issue may cause the link to be negotiated at 10Mbps/Full or 10Mbps/Half when 100MBps/Full is actually possible. In some case, the link is even completely broken and no communication is possible. To detect the corruption, we must look for a magic undocumented bit in the WOL bank (hint given by the SoC vendor kernel) but this is not enough to cover all cases. We also have to look at the LPA ack. If the LP supports Aneg but did not ack our base code when aneg is completed, we assume something went wrong. The detection of a corrupted LPA triggers a restart of the aneg process. This solves the problem but may take up to 6 retries to complete. [1] https://lkml.kernel.org/r/20171208110811.30789-1-jbrunet@baylibre.com Fixes: 8995a96d ("net: phy: Add Amlogic Meson GXL Internal PHY support") Signed-off-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
由 Hans Verkuil 提交于
Using writel causes a "Synchronous Abort". Invert the arguments. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
git://www.denx.de/git/u-boot-microblaze由 Tom Rini 提交于
Xilinx changes for v2018.01-rc2-v2 fpga: - Enable loading bitstream via fit image for !xilinx platforms zynq: - Fix SPL SD boot mode zynqmp: - Not not reset in panic - Do not use simple allocator because of fat changes - Various dt chagnes - modeboot variable setup - Fix fpga loading on automotive devices - Fix coverity issues test: - Fix env test for !hush case - Stephen's patch
-
由 York Sun 提交于
Increase setup, assertion and hold time related to chip-select signal. Additional delay is needed for the signal to propogate through FPGA. This adjustment slightly increase the read and write cycle but has no impact on burst read or write. Signed-off-by: NYork Sun <york.sun@nxp.com>
-
由 York Sun 提交于
Update README file to note LS2088A and LS1088A don't support booting from NAND flash. Signed-off-by: NYork Sun <york.sun@nxp.com>
-
由 York Sun 提交于
Again the image size increases and the length needs to be adjusted. Signed-off-by: NYork Sun <york.sun@nxp.com>
-
由 Kever Yang 提交于
Rockchip release bl31.elf file for armv8 SoCs like rk3399, rk3328, the elf have more than one section, we need to decode it first and packed them into u-boot.itb with its file. This script is to generate the its script. Need default bl31.elf in root directory of U-Boot source and dtb as parameter. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Kever Yang 提交于
Enable SPL_FIT_GENERATOR with path for it. With this patch you can get u-boot.itb for rk3399-firefly with: > make u-boot.itb Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NMark Kettenis <kettenis@openbsd.org> Tested-by: NMark Kettenis <kettenis@openbsd.org> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Kever Yang 提交于
Since we support ATF in SPL and add script for it, let's make the document up to date. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
- 18 12月, 2017 9 次提交
-
-
由 Kever Yang 提交于
Only rk3399 atf need ROCKCHIP_SPL_RESERVE_IRAM. This commit updates its default setting to 0 so that other SoCs do not need to define it. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Kever Yang 提交于
Rockchip SoCs only need boot0 hook at SPL, and the U-Boot proper do not need it. The very beginning of U-Boot proper is different between armv7 and armv8: armv7 start with ARM_VECTORS while armv8 start with 'b reset'. Here is the map of very beginning for all cases: armv7 SPL: TAG(overwrite 'b 1f')+'b reset' + ARM_VECTORS armv7 U-Boot: ARM_VECTORS armv8 SPL: TAG(overwrite 'b 1f')+'b reset' + Reserved_iram(rk3399) armv8 U-Boot: 'b reset' Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Stephen Warren 提交于
After adding our small zynq uboot which has hush parser off same variable tests start to failed. Use quotes only when hush is enabled. Reported-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NStephen Warren <swarren@nvidia.com>
-
Access the timestamp ref ctrl register only if runinng at el3 level otherwise just return. This change fixes the issue when CRL APB is marked as secure and accessing when not in el3 causes exception. Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Check all return values from file functions. In case of negative return exit immediately. Also change fsize return value which can't be negative. Reported-by: Coverity (CID: 23276, 23304, 169357) Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
Dont use 4K sector erase by default, Disabling this would use 64K sector erase and decreases erase time. Also disabled by the fact that UBIFS and JFFS2 won't work with 4K sector erase. Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Enabling all spi flashes because some of these boards can have different flashes compared to public version. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Klaus Goger 提交于
This commit adds ENV_SIZE and ENV_OFFSET configuration items for ARCH_ROCKCHIP, but keeps these non-visible (i.e. not prompt is given). With these new items present, the configuration from the header files is moved to Kconfig. Keeping these non-visible is necessary to have the possibility to select new default values if CONFIG_IS_IN_* is changed (interactively or with oldconfig). Otherwise it will always be set to a previous value if used with a prompt. As an example if we do a defconfig with CONFIG_IS_IN_MMC and change it to CONFIG_IS_IN_SPI_FLASH via menuconfig, ENV_SIZE and ENV_OFFSET will not be changed to the correct values as defconfig will already have set them to the default values of CONFIG_IS_IN_MMC in .config. Signed-off-by: NKlaus Goger <klaus.goger@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
git://github.com/agraf/u-boot由 Tom Rini 提交于
Patch queue for efi - 2017-12-17 A few fixes for 2018.01: - Compile fix with helloworld example - DP match fix (fixes FreeBSD loader and grub on block storage) - More DP fixes for SD, block - Fix use-after-free
-
- 17 12月, 2017 6 次提交
-
-
由 Jakob Unterwurzacher 提交于
The PCIe reset signal is connected to GPIO4_C6 on the Puma module. This pin is supplied by 1.8V, but the default iodomain setting is 3.0V and in this situation the pin is unable to go high. Linux assumes that this signal works in early boot as PCIe is probed before loading the iodomain driver. Make PCIe work in Linux by setting the gpio4cd iodomain to 1.8V. Signed-off-by: NJakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Kever Yang 提交于
User do not need to access the reserved part in system, remove them from partition table. Rename atf to trust as generic name for armv7 do not use ATF. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Heinrich Schuchardt 提交于
Add a description for dp_part_fill(). Reword a comment in the function. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
When converting device nodes and paths to text we should stick to the UEFI spec. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
According to the UEFI spec the numbering of partitions has to start with 1. Partion number 0 is reserved for the optional device path for the complete block device. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
The SD cards and eMMC devices have different device nodes. The current coding interpretes all MMC devices as eMMC. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-