- 27 11月, 2012 19 次提交
-
-
由 Scott Wood 提交于
Document parameters used for specifying the NAND image to be loaded. Also fix the definition of CONFIG_SPL_NAND_SIMPLE -- it's only nand_spl_simple.c, not the entire nand directory. The word "simple" is there for a reason. :-) Signed-off-by: NScott Wood <scottwood@freescale.com> --- v2: updated for makefile changes earlier in patchset
-
由 Scott Wood 提交于
Some small SPLs do not use nand_base.c, and a subset of those also require a special driver. Some SPLs need software ECC but others can't fit it. All existing boards that specify CONFIG_SPL_NAND_SUPPORT have these symbols added to preserve existing behavior. Signed-off-by: NScott Wood <scottwood@freescale.com> -- v2: use positive logic for including bits of NAND, rather than a MINIMAL symbol that excludes things.
-
由 Scott Wood 提交于
Introduces CONFIG_SPL_RELOC_TEXT_BASE and CONFIG_SPL_RELOC_STACK. Signed-off-by: NScott Wood <scottwood@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
-
由 Scott Wood 提交于
Update CONFIG_RAMBOOT and CONFIG_NAND_SPL references to accept CONFIG_SPL and CONFIG_SPL_BUILD, respectively. CONFIG_NAND_SPL can be removed once the last mpc85xx nand_spl target is gone. CONFIG_RAMBOOT will need to remain for other use cases, but it doesn't seem right to overload it for meaning SPL as well as nand_spl does. Even if it's somewhat appropriate for the main u-boot, the SPL itself isn't (necessarily) ramboot, and we don't have separate configs for SPL and main u-boot. It was also inconsistent, as other platforms such as mpc83xx didn't use CONFIG_RAMBOOT in this way. Signed-off-by: NScott Wood <scottwood@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
-
由 Scott Wood 提交于
cpu_init_nand.c is renamed to spl_minimal.c as it is not really NAND-specific. Signed-off-by: NScott Wood <scottwood@freescale.com> --- v2: factor out START, and change cpu_init_nand.c to spl_minimal.c Cc: Andy Fleming <afleming@freescale.com>
-
由 Scott Wood 提交于
A subsequent patch will conditionalize some of the files that are currently unconditional. Signed-off-by: NScott Wood <scottwood@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
-
由 Scott Wood 提交于
There is nothing really NAND-specific about this file. Signed-off-by: NScott Wood <scottwood@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
-
由 Scott Wood 提交于
The toplevel makefile hardcodes this stuff, so spl/Makefile needs to as well. Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Scott Wood 提交于
It applies to non-Freescale 85xx boards as well as Freescale boards, so it doesn't belong in board/freescale. Plus, it needs to come out of nand_spl if it's to be used by the new SPL. Signed-off-by: NScott Wood <scottwood@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
-
由 Scott Wood 提交于
It's arch code and not a driver, so move it where it belongs. When it originally went into drivers/misc there was no 8xxx CPU directory. This will make new-SPL support a little easier since we can keep the CPU stuff together and not need to pull stuff in from drivers/misc. Signed-off-by: NScott Wood <scottwood@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
-
由 Scott Wood 提交于
In the RAMBOOT/SPL case we were creating a TLB entry starting at CONFIG_SYS_MONITOR_BASE, and just hoping that the base was properly aligned for the TLB entry size. This turned out to not be the case with NAND SPL because the main U-Boot starts at an offset into the image in order to skip the SPL itself. Fix the TLB entry to always start at a proper alignment. We still assume that CONFIG_SYS_MONITOR_BASE doesn't start immediately before a large-page boundary thus requiring multiple TLB entries. Signed-off-by: NScott Wood <scottwood@frescale.com> Cc: Andy Fleming <afleming@freescale.com>
-
由 Scott Wood 提交于
This was introduced by commit 24461519, but it fails in a minimal SPL build where the only thing in arch/powerpc/lib is cache.c, which apparently doesn't generate any fixup records. The problem is reported to occur with GCC 3.x, so insist on GCC 4.0 or newer. Patterned after checkthumb as suggested by Tom Rini. Signed-off-by: NScott Wood <scottwood@freescale.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Tom Rini <trini@ti.com> -- v2: test gcc version instead of testing nothing
-
由 Scott Wood 提交于
Currently the SPL target is specified in a CPU-specific makefile fragment. While some targets may need something more complicated than a simple target name, targets which don't need this shouldn't have to provide a makefile fragment just for this. Signed-off-by: NScott Wood <scottwood@freescale.com> --- v2: Removed default target as it's been pointed out to me how existing platforms cause the SPL to be built.
-
由 Scott Wood 提交于
Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 José Miguel Gonçalves 提交于
Samsung's S3C24XX SoCs need this in order to generate a binary image with a padded SPL concatenated with U-Boot. Signed-off-by: NJosé Miguel Gonçalves <jose.goncalves@inov.pt> [scottwood@freescale.com: fixed prereq of u-boot.ubl] Signed-off-by: NScott Wood <scottwood@freescale.com> -- v2: Removed spl/ prefix from u-boot.ubl prerequisite.
-
由 Scott Wood 提交于
Now outputs like this: L2: 512 KB already enabled, moving to 0xf8f80000 rather than this: L2: 512 KB already enabledmoving to 0xf8f80000 Signed-off-by: NScott Wood <scottwood@freescale.com> Cc: Andy Fleming <afleming@gmail.com>
-
由 Scott Wood 提交于
Previously, in many if not all configs we were creating overlapping TLB entries which is illegal. This caused a crash during boot when moving p2020rdb NAND SPL into L2 SRAM. Signed-off-by: NScott Wood <scottwood@freescale.com> Cc: Prabhakar Kushwaha <prabhakar@freescale.com> Cc: Andy Fleming <afleming@freescale.com> -- Prabhakar, please test that debug still works.
-
由 Scott Wood 提交于
TEMT is set when the transmitter is totally empty and all output has finished. This prevents output problems (including a loss of synchronization observed on p2020 that persisted for quite a while) if SPL has output still on its way out. Signed-off-by: NScott Wood <scottwood@freescale.com> -- v2: fixed typo in subject, and explained what the bit does in the changelog
-
由 Scott Wood 提交于
CONFIG_NS16550_MIN_FUNCTIONS is used by small SPLs to gain access to basic ns16550 output code without pulling in things not needed by the SPL. This previously only worked with non-MULTI configs. Recently MULTI was made mandatory, and MIN_FUNCTIONS fails like this: drivers/serial/libserial.o: In function `calc_divisor.clone.0': serial_ns16550.c:(.text.calc_divisor.clone.0+0x24): undefined reference to `get_bus_freq' drivers/serial/libserial.o: In function `_serial_getc': (.text._serial_getc+0x30): undefined reference to `NS16550_getc' drivers/serial/libserial.o: In function `_serial_tstc': (.text._serial_tstc+0x30): undefined reference to `NS16550_tstc' drivers/serial/libserial.o: In function `_serial_setbrg': (.text._serial_setbrg+0x3c): undefined reference to `NS16550_reinit' make[1]: *** [/tmp/u-boot/spl/u-boot-spl] Error 1 make: *** [/tmp/u-boot/spl/u-boot-spl.bin] Error 2 With MIN_FUNCTIONS we don't need anything from this file, so don't build it. The conditional needs to be in the file itself rather than the makefile, because the config symbols are only imported to the makefiles once, not separately for the SPL phase of the build. Signed-off-by: NScott Wood <scottwood@freescale.com>
-
- 20 11月, 2012 2 次提交
-
-
- 14 11月, 2012 19 次提交
-
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
由 Vikram Narayanan 提交于
The inclusion of LCD patch into mx53loco breaks the build when CONFIG_VIDEO is disabled. Fix this by splitting the video related stuff to a new file. Also rename the function lcd_iomux to setup_iomux_lcd to make the namings aligned with the other iomux functions. Signed-off-by: NVikram Narayanan <vikram186@gmail.com> Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Vikram Narayanan 提交于
The inclusion of LCD patch into mx51evk breaks the build when CONFIG_VIDEO is disabled. Fix this by splitting the video related stuff to a new file. Also rename the function lcd_iomux to setup_iomux_lcd to make the namings aligned with the other iomux functions. Signed-off-by: NVikram Narayanan <vikram186@gmail.com> Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Andreas Bießmann 提交于
This patch adds time measurement and throughput calculation for all supported load commands. The output of ext2load changes from ---8<--- 1830666 bytes read --->8--- to ---8<--- 1830666 bytes read in 237 ms (7.4 MiB/s) --->8--- Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com> [agust: rebased and revised commit log] Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Alejandro Mery 提交于
the upcoming sunxi (allwinner a10/a13) platform enables zfs by default, and using linaro's hf -msoft-float makes the build fail because this u64 division. Signed-off-by: NAlejandro Mery <amery@geeks.cl> Acked-by: NStefan Roese <sr@denx.de>
-
if a board uses the vcxk driver option CONFIG_SYS_VCXK_DOUBLEBUFFERD, compilier shows warnings. This patch will fix it. Signed-off-by: NJens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
-
- update clock settings for higher perfomance - change standard baud rate to 115200 - fix flash base address - remove unused defines - add I2C support - switch form board dependent flash to cfi - remove board dependent flash code - use sdram bank 0 instead of bank 1 on boot - enable on board frame buffer instead external - remove fake mac address form config - add watchdog support - add status led support Signed-off-by: NJens Scharsig (BuS Elektronik) <esw@bus-elektronik.de> [agust: fixed small style issues and build warning] Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Łukasz Majewski 提交于
Move pmic_init() function call from board_init() to power_init_board() to work with new PMIC/POWER framework. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
-
由 Łukasz Majewski 提交于
Move pmic_init() function call from board_init() to power_init_board() to work with new PMIC/POWER framework. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
-
由 Łukasz Majewski 提交于
Rename CONFIG_DIALOG_PMIC to CONFIG_DIALOG_POWER Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Łukasz Majewski 提交于
Rename all CONFIG_PMIC* defines to CONFIG_POWER* Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Łukasz Majewski 提交于
Rename pmic/power related files at ./drivers/power directory Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Łukasz Majewski 提交于
Two extra commands: "pmic name bat state" and "pmic name bat charge" has been added to pmic framework. Those provides state display and charge capabilities to named batteries. The pmic_core.c file has been refactored to more consistent name scheme. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Łukasz Majewski 提交于
The battery connected to Samsung's Trats development board is now charged when voltage drops below threshold. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
-
由 Łukasz Majewski 提交于
When charging battery is necessary, the development board needs to be turned into low power mode for better efficiency. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
-
由 Łukasz Majewski 提交于
Support for MAX8997 built-in charger. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Łukasz Majewski 提交于
Support for TRATS battery has been added. It is treated as a "normal" power related device and thereof controlled by pmic/power subsystem. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
-
由 Łukasz Majewski 提交于
FG IC built into the MAX8997 device (compliant to MAX17042) is enabled at TRATS. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
-
由 Łukasz Majewski 提交于
MUIC IC built into the MAX8997 device is enabled at TRATS. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
-