mx51evk: Fix build error when CONFIG_VIDEO is disabled

The inclusion of LCD patch into mx51evk breaks the build when
CONFIG_VIDEO is disabled. Fix this by splitting the video related
stuff to a new file.

Also rename the function lcd_iomux to setup_iomux_lcd to make the
namings aligned with the other iomux functions.
Signed-off-by: NVikram Narayanan <vikram186@gmail.com>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>

arch/arm/include/asm/imx-common/mx5_video.h

+/*
+ * Copyright (C) 2012
+ * Anatolij Gustschin, DENX Software Engineering, <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+#ifndef __MX5_VIDEO_H
+#define __MX5_VIDEO_H
+
+#ifdef CONFIG_VIDEO
+void lcd_enable(void);
+void setup_iomux_lcd(void);
+#else
+static inline void lcd_enable(void) { }
+static inline void setup_iomux_lcd(void) { }
+#endif
+
+#endif

board/freescale/mx51evk/Makefile

@@ -23,8 +23,10 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= mx51evk.o
+COBJS-y			+= mx51evk.o
+COBJS-$(CONFIG_VIDEO)	+= mx51evk_video.o
 
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 

board/freescale/mx51evk/mx51evk.c

@@ -30,6 +30,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/clock.h>
+#include <asm/imx-common/mx5_video.h>
 #include <i2c.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
@@ -37,12 +38,6 @@
 #include <fsl_pmic.h>
 #include <mc13892.h>
 #include <usb/ehci-fsl.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-
-#define MX51EVK_LCD_3V3		IMX_GPIO_NR(4, 9)
-#define MX51EVK_LCD_5V		IMX_GPIO_NR(4, 10)
-#define MX51EVK_LCD_BACKLIGHT	IMX_GPIO_NR(3, 4)
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -471,54 +466,6 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
-static struct fb_videomode const claa_wvga = {
-	.name		= "CLAA07LC0ACW",
-	.refresh	= 57,
-	.xres		= 800,
-	.yres		= 480,
-	.pixclock	= 37037,
-	.left_margin	= 40,
-	.right_margin	= 60,
-	.upper_margin	= 10,
-	.lower_margin	= 10,
-	.hsync_len	= 20,
-	.vsync_len	= 10,
-	.sync		= 0,
-	.vmode		= FB_VMODE_NONINTERLACED
-};
-
-void lcd_iomux(void)
-{
-	/* DI2_PIN15 */
-	mxc_request_iomux(MX51_PIN_DI_GP4, IOMUX_CONFIG_ALT4);
-
-	/* Pad settings for MX51_PIN_DI2_DISP_CLK */
-	mxc_iomux_set_pad(MX51_PIN_DI2_DISP_CLK, PAD_CTL_HYS_NONE |
-			  PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
-			  PAD_CTL_DRV_MAX | PAD_CTL_SRE_SLOW);
-
-	/* Turn on 3.3V voltage for LCD */
-	mxc_request_iomux(MX51_PIN_CSI2_D12, IOMUX_CONFIG_ALT3);
-	gpio_direction_output(MX51EVK_LCD_3V3, 1);
-
-	/* Turn on 5V voltage for LCD */
-	mxc_request_iomux(MX51_PIN_CSI2_D13, IOMUX_CONFIG_ALT3);
-	gpio_direction_output(MX51EVK_LCD_5V, 1);
-
-	/* Turn on GPIO backlight */
-	mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
-	mxc_iomux_set_input(MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT,
-							INPUT_CTL_PATH1);
-	gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1);
-}
-
-void lcd_enable(void)
-{
-	int ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565);
-	if (ret)
-		printf("LCD cannot be configured: %d\n", ret);
-}
-
 int board_early_init_f(void)
 {
 	setup_iomux_uart();
@@ -526,7 +473,7 @@ int board_early_init_f(void)
 #ifdef CONFIG_USB_EHCI_MX5
 	setup_usb_h1();
 #endif
-	lcd_iomux();
+	setup_iomux_lcd();
 
 	return 0;
 }

board/freescale/mx51evk/mx51evk_video.c

+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/list.h>
+#include <asm/gpio.h>
+#include <asm/arch/iomux.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+
+#define MX51EVK_LCD_3V3		IMX_GPIO_NR(4, 9)
+#define MX51EVK_LCD_5V		IMX_GPIO_NR(4, 10)
+#define MX51EVK_LCD_BACKLIGHT	IMX_GPIO_NR(3, 4)
+
+static struct fb_videomode const claa_wvga = {
+	.name		= "CLAA07LC0ACW",
+	.refresh	= 57,
+	.xres		= 800,
+	.yres		= 480,
+	.pixclock	= 37037,
+	.left_margin	= 40,
+	.right_margin	= 60,
+	.upper_margin	= 10,
+	.lower_margin	= 10,
+	.hsync_len	= 20,
+	.vsync_len	= 10,
+	.sync		= 0,
+	.vmode		= FB_VMODE_NONINTERLACED
+};
+
+void setup_iomux_lcd(void)
+{
+	/* DI2_PIN15 */
+	mxc_request_iomux(MX51_PIN_DI_GP4, IOMUX_CONFIG_ALT4);
+
+	/* Pad settings for MX51_PIN_DI2_DISP_CLK */
+	mxc_iomux_set_pad(MX51_PIN_DI2_DISP_CLK, PAD_CTL_HYS_NONE |
+			  PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+			  PAD_CTL_DRV_MAX | PAD_CTL_SRE_SLOW);
+
+	/* Turn on 3.3V voltage for LCD */
+	mxc_request_iomux(MX51_PIN_CSI2_D12, IOMUX_CONFIG_ALT3);
+	gpio_direction_output(MX51EVK_LCD_3V3, 1);
+
+	/* Turn on 5V voltage for LCD */
+	mxc_request_iomux(MX51_PIN_CSI2_D13, IOMUX_CONFIG_ALT3);
+	gpio_direction_output(MX51EVK_LCD_5V, 1);
+
+	/* Turn on GPIO backlight */
+	mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
+	mxc_iomux_set_input(MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT,
+							INPUT_CTL_PATH1);
+	gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1);
+}
+
+void lcd_enable(void)
+{
+	int ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565);
+	if (ret)
+		printf("LCD cannot be configured: %d\n", ret);
+}