- 06 12月, 2011 6 次提交
-
-
由 Gerlando Falauto 提交于
Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com> Acked-by: NMike Frysinger <vapier@gentoo.org>
-
由 Gerlando Falauto 提交于
Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com> Acked-by: NMike Frysinger <vapier@gentoo.org>
-
由 Stephen Warren 提交于
Commit deb5ca80 "disk: part_efi: fix **pgpt_pte == NULL" modified the code to pass "&gpt_head" to is_gpt_valid() rather than the previous "gpt_head". However, gpt_head is a pointer to the buffer, not the actual buffer, since it was allocated using ALLOC_CACHE_ALIGN_BUFFER. This caused is_gpt_valid() to read the disk block onto the stack rather than into the buffer, causing the code to fail. This change reverts that portion of the commit mentioned above. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NDoug Anderson <dianders@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org> Acked-by: NMike Frysinger <vapier@gentoo.org> Tested-by: NAnton Staaf <robotboy@chromium.org>
-
由 Andy Fleming 提交于
We want to move everything to phylib, and we definitely don't want new drivers using the miiphy infrastructure. Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Zang Roy-R61911 提交于
The original m88e1111s_config() does not do the SGMII mode initialization and is buggy. Rewrite the function according to 3.0.6 kernel function m88e1111_config_init() in drivers/net/phy/marvell.c Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Acked-by: NAndy Fleming <afleming@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org>
-
git://git.denx.de/u-boot-staging由 Wolfgang Denk 提交于
* 'marek.vasut@gmail.com' of git://git.denx.de/u-boot-staging: tools/os_support: add OS X Lion support board/esd/dasa_sim/flash.c: Fix GCC 4.6 warning board/esd/common/xilinx_jtag_micro.c: Fix GCC 4.6 warning
-
- 02 12月, 2011 32 次提交
-
-
由 Andreas Bießmann 提交于
OS X Lion's c-library implements getline(), therefore prevent including the old helper implementation for __DARWIN_C_LEVEL < 200809L. Without this patch following error occours: ---8<--- In file included from os_support.h:32, from img2srec.c:55: getline.h:1: error: conflicting types for ‘getline’ /usr/include/stdio.h:449: error: previous declaration of ‘getline’ was here --->8--- Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Matthias Fuchs 提交于
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
-
由 Matthias Fuchs 提交于
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
-
由 Nobuhiro Iwamatsu 提交于
The ecovec board has SH7724, 256MB DDR2-SDRAM, USB, Ethernet, and more. This patch supports the following functions: - 256MB DDR2-SDRAM - USB - I2C - Ethernet Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Yoshihiro Shimoda 提交于
The new sh_eth driver uses the phy driver. So, this patch enables it. Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Yoshihiro Shimoda 提交于
The new sh_eth driver uses the phy driver. So, this patch enables it. Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Mike Frysinger 提交于
Recent builds for SH4 boards fail with a lot of errors like: cmd_mem.o: In function 'dcache_invalid_range': include/asm/cache.h:25: multiple definition of 'dcache_invalid_range' include/asm/cache.h:25: first defined here This is due to the funcs being defined in the header, but not static or inline or extern. So move them to the sh4-specific cache.c file. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
When DDR-ECC is effective, the physical memory which can be used reduces this boardby half. However, this mode can chenge to disable. When it was disabled, user can use 512 MB of physical memory. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: "Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com> Acked-by: N"Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Phil Edworthy 提交于
The ashrsi3 function is used by some commands that aren't in SH2A default configs (e.g. JFFS2). The ashrsi3.S file has been copied from Linux. Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Mike Frysinger 提交于
Not all SuperH toolchains support -mno-fdpic. Chances are good that if the flag doesn't work, it isn't defaulting to the FDPIC ABI, so the flag isn't needed. So only add it if it is actually supported. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Yoshihiro Shimoda 提交于
The new sh_eth driver uses the phy driver. So, this patch enables it. Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Yoshihiro Shimoda 提交于
The sh_eth driver had an own mii functions. However the function didn't support the gigabit PHY. The U-Boot has the general phy driver and miiphybb driver, and they already support it. So this patch removes the own functions and uses the phy driver. Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
ssh://gemini/home/wd/git/u-boot/master由 Wolfgang Denk 提交于
* 'master' of ssh://gemini/home/wd/git/u-boot/master: board/emk/top860/top860.c: Fix GCC 4.6 build warning board/sbc405/strataflash.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc86xx/cpu.c: Fix GCC 4.6 build warning board/freescale/mpc8610hpcd/mpc8610hpcd.c: Fix GCC 4.6 build warning board/mpl/common/flash.c: Fix GCC 4.6 build warning post/board/lwmon5/gdc.c: Fix GCC 4.6 build warning drivers/usb/host/sl811-hcd.c: Fix GCC 4.6 build warning board/sandburst/common/flash.c: Fix GCC 4.6 build warning DB64460: Fix GCC 4.6 build warnings DB64360: Fix GCC 4.6 build warnings board/cray/L1/flash.c: Fix GCC 4.6 build warning drivers/block/sata_dwc.c: Fix GCC 4.6 build warning board/amirix/ap1000/flash.c: Fix GCC 4.6 build warning alpr board: Fix GCC 4.6 build warnings image: Don't detect XIP images as overlapping. image: Implement IH_TYPE_KERNEL_NOLOAD ppc4xx: Add Io64 board support ppc4xx: fix PMC440 painit command ppc4xx: remove invalid access to PCI_BRDGOPT2 register ppc4xx: use CONFIG_PCI_BOOTDELAY instead of private implementation mpc85xx: support for Freescale COM Express P2020 arch/powerpc/cpu/mpc8xxx/ddr/interactive.c: Fix GCC 4.6 build warning mpc85xx: support board-specific reset function powerpc/85xx: verify the localbus device tree address before booting the OS mpc8xxx: update module_type values from JEDEC DDR3 SPD Specification powerpc/p3060qds: Add board related support for P3060QDS platform powerpc/85xx: clean up and document the QE/FMAN microcode macros powerpc/85xx: always implement the work-around for Erratum SATA_A001 powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h powerpc/85xx: Add workaround for erratum A-003474 powerpc/85xx: fixup flexcan device tree clock-frequency powerpc/85xx: Add workaround for erratum CPU-A003999 x86: Fix some bugs in the i8402 driver when no controller is present x86: Make the i8042 driver checkpatch clean x86: Wrap small helper functions from libgcc to avoid an ABI mismatch x86: Import the glibc memset implementation x86: Fix a few recently added bugs x86: Don't relocate symbols which point to things that aren't relocated x86: Fix how the location of the realmode and bios blobs are calculated x86: Misc cleanups x86: Misc PCI touchups x86: Ensure IDT and GDT remain 16-byte aligned post relocation x86: Provide more configuration granularity x86: Add multiboot header sc520: Create arch asm-offsets x86: Punt cold- and warm-boot flags cosmetic: checkpatch cleanup of board/eNET/*.c cosmetic: checkpatch cleanup of arch/x86/lib/*.c cosmetic: checkpatch cleanup of arch/x86/cpu/sc520/*.c cosmetic: checkpatch cleanup of arch/x86/cpu/*.c x86: Call hang() on unrecoverable exception menu.c: use puts() instead of printf() where possible MAKEALL: drop obsolete mx31pdk_nand target dataflash: fix parameters order in write_dataflash() hawkboard: Replace HAWKBOARD_KICK{0, 1}_UNLOCK defines davinci_sonata: define CONFIG_MACH_TYPE for davinci_sonata board davinci_schmoogie: define CONFIG_MACH_TYPE for davinci_schmoogie board arm: a320evb: define mach-type in board config file OMAP3: Use sdelay from arch/arm/cpu/armv7/syslib.c instead of cloning that. Fix Stelian's email address DIU: 1080P and 720P support CFB: Fix font rendering on mx5 framebuffer
-
由 Wolfgang Denk 提交于
Fix: top860.c: In function 'initdram': top860.c:90:11: warning: variable 'j' set but not used [-Wunused-but-set-variable] Note: No attempts were made to convert this file completely to using I/O accessors. This is left as an exercise for the board maintainer. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
-
由 Wolfgang Denk 提交于
Fix: strataflash.c: In function 'flash_write_cfiword': strataflash.c:673:11: warning: variable 'ctladdr' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Acked-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Wolfgang Denk 提交于
Fix: cpu.c: In function 'checkcpu': cpu.c:51:7: warning: variable 'ver' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Acked-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Wolfgang Denk 提交于
Fix: mpc8610hpcd.c: In function 'pci_init_board': mpc8610hpcd.c:238:15: warning: variable 'pordevsr' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Acked-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Wolfgang Denk 提交于
Fix: ../common/flash.c: In function 'flash_init': ../common/flash.c:160:16: warning: variable 'size_b1' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Denis Peter <d.peter@mpl.ch> Acked-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Wolfgang Denk 提交于
Fix: gdc.c: In function 'gdc_test_reg_one': gdc.c:66:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Acked-by: NStefan Roese <sr@denx.de>
-
由 Wolfgang Denk 提交于
Fix: sl811-hcd.c: In function 'sl811_rh_submit_urb': sl811-hcd.c:556:8: warning: variable 'wIndex' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Remy Bohmer <linux@bohmer.net>
-
由 Wolfgang Denk 提交于
Fix: ../common/flash.c: In function 'flash_erase': ../common/flash.c:307:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Travis Sawyer <travis.sawyer@sandburst.com> Acked-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Wolfgang Denk 提交于
Fix: db64460.c: In function 'debug_led': db64460.c:413:6: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64460_eth_real_open': mv_eth.c:423:6: warning: variable 'port_status' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64460_eth_stop': mv_eth.c:641:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64460_eth_xmit': mv_eth.c:717:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64460_eth_receive': mv_eth.c:802:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64460_eth_get_stats': mv_eth.c:901:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64460_eth_update_stat': mv_eth.c:929:24: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] mv_eth.c:928:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64460_eth_print_stat': mv_eth.c:1010:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'eth_clear_mib_counters': mv_eth.c:2067:15: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'check_dimm': sdram_init.c:289:50: warning: variable 'trrd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:289:37: warning: variable 'tras_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:289:24: warning: variable 'trcd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:289:8: warning: variable 'trp_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:279:34: warning: variable 'devicesForErrCheck' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'setup_sdram': sdram_init.c:1255:13: warning: variable 'check' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'initdram': sdram_init.c:1744:25: warning: variable 'check' set but not used [-Wunused-but-set-variable] sdram_init.c:1742:14: warning: variable 's1' set but not used [-Wunused-but-set-variable] sdram_init.c:1742:6: warning: variable 's0' set but not used [-Wunused-but-set-variable] Note: no attempt was make to clean up the mess coding style and other issues in sdram_init.c Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Fix: db64360.c: In function 'debug_led': db64360.c:413:6: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_real_open': mv_eth.c:424:6: warning: variable 'port_status' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_stop': mv_eth.c:642:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_xmit': mv_eth.c:718:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_receive': mv_eth.c:803:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_get_stats': mv_eth.c:902:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_update_stat': mv_eth.c:930:24: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] mv_eth.c:929:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_print_stat': mv_eth.c:1011:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'eth_clear_mib_counters': mv_eth.c:2068:15: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'check_dimm': sdram_init.c:289:50: warning: variable 'trrd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:289:37: warning: variable 'tras_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:289:24: warning: variable 'trcd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:289:8: warning: variable 'trp_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:279:34: warning: variable 'devicesForErrCheck' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'setup_sdram': sdram_init.c:1256:13: warning: variable 'check' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'initdram': sdram_init.c:1735:25: warning: variable 'check' set but not used [-Wunused-but-set-variable] sdram_init.c:1733:14: warning: variable 's1' set but not used [-Wunused-but-set-variable] sdram_init.c:1733:6: warning: variable 's0' set but not used [-Wunused-but-set-variable] Note: no attempt was make to clean up the mess coding style and other issues in sdram_init.c Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Fix: flash.c: In function 'flash_erase': flash.c:276:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Acked-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Wolfgang Denk 提交于
Fix: sata_dwc.c: In function 'scan_sata': sata_dwc.c:535:38: warning: variable 'udma_mask' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Kazuaki Ichinohe <kazuichi@fsi.co.jp>
-
由 Wolfgang Denk 提交于
Fix: flash.c: In function 'flash_write_cfiword': flash.c:778:11: warning: variable 'ctladdr' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Acked-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Wolfgang Denk 提交于
Fix: fpga.c: In function 'fpga_pre_fn': fpga.c:88:16: warning: variable 'reg' set but not used [-Wunused-but-set-variable] nand.c: In function 'alpr_nand_dev_ready': nand.c:125:18: warning: variable 'val' set but not used [-Wunused-but-set-variable] Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Acked-by: NStefan Roese <sr@denx.de>
-
git://git.denx.de/u-boot-staging由 Wolfgang Denk 提交于
* 'sr@denx.de' of git://git.denx.de/u-boot-staging: image: Don't detect XIP images as overlapping. image: Implement IH_TYPE_KERNEL_NOLOAD
-
git://git.denx.de/u-boot-ppc4xx由 Wolfgang Denk 提交于
* 'master' of git://git.denx.de/u-boot-ppc4xx: ppc4xx: Add Io64 board support ppc4xx: fix PMC440 painit command ppc4xx: remove invalid access to PCI_BRDGOPT2 register ppc4xx: use CONFIG_PCI_BOOTDELAY instead of private implementation
-
git://git.denx.de/u-boot-mpc85xx由 Wolfgang Denk 提交于
* 'master' of git://git.denx.de/u-boot-mpc85xx: mpc85xx: support for Freescale COM Express P2020 arch/powerpc/cpu/mpc8xxx/ddr/interactive.c: Fix GCC 4.6 build warning mpc85xx: support board-specific reset function powerpc/85xx: verify the localbus device tree address before booting the OS mpc8xxx: update module_type values from JEDEC DDR3 SPD Specification powerpc/p3060qds: Add board related support for P3060QDS platform powerpc/85xx: clean up and document the QE/FMAN microcode macros powerpc/85xx: always implement the work-around for Erratum SATA_A001 powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h powerpc/85xx: Add workaround for erratum A-003474 powerpc/85xx: fixup flexcan device tree clock-frequency powerpc/85xx: Add workaround for erratum CPU-A003999
-
- 01 12月, 2011 2 次提交
-
-
由 Stephen Warren 提交于
bootm_load_os() detects when it writes the decompressed image over the top of the compressed image. If this happens, the original image is corrupted. When the original image is a multi-component legacy image, or a (potentially multi-component) FIT image, this implies that other components may be corrupted. In turn, this means that booting is unlikely to be successful. However, in the case of no image compresssion coupled with an image with load address equal to where the image is already located (e.g. an XIP kernel, or IH_TYPE_KERNEL_ANYLOAD), there has been no copy and hence no corruption, no matter whether it's a single-component legacy image, a multi-component legacy image, or a FIT image. In this case, disable the overlap detection, and allow boot to continue. Without this change, when booting a single-component legacy image that contains an IH_TYPE_KERNEL_ANYLOAD, bootm_load_os() would have returned BOOTM_ERR_OVERLAP, but the caller ignores this, and boot continues and succeeds. Now, the false error is no longer even returned. Without this change, when booting a FIT image that contains an IH_TYPE_KERNEL_ANYLOAD, bootm_load_os() would have returned BOOTM_ERR_OVERLAP, which would then cause the caller to reset the board. Now, the false error is no longer returned, and boot succeeds. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stephen Warren 提交于
The legacy uImage format includes an absolute load and entry-point address. When bootm operates on a kernel uImage in memory that isn't loaded at the address in the image's load address, U-Boot will copy the image to its address in the header. Some kernel images can actually be loaded and used at any arbitrary address. An example is an ARM Linux kernel zImage file. To represent this capability, IH_TYPE_KERNEL_NOLOAD is implemented, which operates just like IH_TYPE_KERNEL, except that the load address header is ignored, and U-Boot does not copy the image to its load address, but rather uses it in-place. This is useful when sharing a single (uImage-wrapped) zImage across multiple boards with different memory layouts; in this case, a specific load address need not be picked when creating the uImage, but instead is selected by the board-specific U-Boot environment used to load and boot that image. v2: Rename from IH_TYPE_KERNEL_ANYLOAD to IH_TYPE_KERNEL_NOLOAD. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NStefan Roese <sr@denx.de>
-