- 28 4月, 2011 17 次提交
-
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Luca Ceresoli 提交于
CONFIG_OMAP34XX must be checked for existence, not value. Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de> Cc: Albert Aribaud <albert.aribaud@free.fr> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Alexander Holler 提交于
Signed-off-by: NAlexander Holler <holler@ahsoftware.de> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Albert ARIBAUD 提交于
Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Macpaul Lin 提交于
Fix include path of timer fttmr010 in a320evb. Signed-off-by: NMacpaul Lin <macpaul@andestech.com>
-
由 Rogan Dawes 提交于
-
由 Lei Wen 提交于
Add i2c support to aspenite board with Armada100 soc. Acked-by: NHeiko Schocher <hs@denx.de> Acked-by: NPrafulla Wadaskar <prafulla@marvell.com> Signed-off-by: NLei Wen <leiwen@marvell.com>
-
由 Lei Wen 提交于
Add i2c support to dkb board with pantheon soc. Acked-by: NHeiko Schocher <hs@denx.de> Acked-by: NPrafulla Wadaskar <prafulla@marvell.com> Signed-off-by: NLei Wen <leiwen@marvell.com>
-
由 Lei Wen 提交于
Add i2c_clk_enable in the cpu specific code, since previous platform it, while new platform don't need. In the pantheon and armada100 platform, this function is defined as NULL one. Acked-by: NHeiko Schocher <hs@denx.de> Acked-by: NPrafulla Wadaskar <prafulla@marvell.com> Signed-off-by: NLei Wen <leiwen@marvell.com>
-
由 Lei Wen 提交于
For better sharing with other platform other than pxa's, it is more convenient to put the driver to the common place. Acked-by: NHeiko Schocher <hs@denx.de> Acked-by: NPrafulla Wadaskar <prafulla@marvell.com> Signed-off-by: NLei Wen <leiwen@marvell.com>
-
由 Po-Yu Chuang 提交于
ftpmu010 related code has been moved to drivers/power/. Signed-off-by: NPo-Yu Chuang <ratbert@faraday-tech.com> Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>
-
由 Jason Liu 提交于
factor out boot cause function to common code to avoid the duplicate code in each board support package Signed-off-by: NJason Liu <jason.hui@linaro.org>
-
由 Fabio Estevam 提交于
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Acked-by: NDetlev Zundel <dzu@denx.de>
-
由 Fabio Estevam 提交于
Use the same method of the Linux kernel to print the MX31 silicon version on boot. Tested on a MX31PDK with a 2.0 silicon, where it shows: CPU: Freescale i.MX31 rev 2.0 at 531 MHz Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Stefano Babic 提交于
As exception among the i.MX processors, the i.MX31 has headers without general names (mx31-regs.h, mx31.h instead of imx-regs.h and clock.h). This requires several nasty #ifdef in the drivers to include the correct header. The patch cleans up the driver and renames the header files as for the other i.MX processors. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Fabio Estevam 提交于
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Stefano Babic 提交于
The patch add CONFIG_HW_WATCHDOG to be used with the internal watchdog timer of the MX31 processor. Two function are exported for the board maintainers: mxc_hw_watchdog_enable mxc_hw_watchdog_reset The board maintainer can decide to use mxc_hw_watchdog_reset as hw_watchdog_reset, or to implement his own function to reset the watchdog. The watchdog timer can be configured with CONFIG_SYS_WD_TIMER_SECS (value in seconds). The MX31 allows values between 0.5 (CONFIG_SYS_WD_TIMER_SECS = 0) and 128 seconds. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
- 13 4月, 2011 1 次提交
-
-
由 Loïc Minier 提交于
Signed-off-by: NLoc Minier <loic.minier@linaro.org>
-
- 28 3月, 2011 6 次提交
-
-
由 Minkyu Kang 提交于
Use the global data instead of bss variable, replace as follow. count_value -> removed timestamp -> tbl lastdec -> lastinc Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NAlbert ARIBAUD <albert.aribaud@free.fr>
-
由 Minkyu Kang 提交于
Use pwm functions for timer that is PWM timer 4. Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Donghwa Lee 提交于
This is common pwm driver of S5P. Signed-off-by: NDonghwa Lee <dh09.lee@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 seedshope 提交于
Since nand boot have some limit for the first 4KB, We only disable the LED function to reduce the code space. At the same time, Fix the compile error for LED function undefined in the compile time of nand_spl. Signed-off-by: NZhong Hongbo <bocui107@gmail.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Po-Yu Chuang 提交于
Monitor protection region in FLASH did not cover .rel.dyn and .dynsym sections, because it uses __bss_start to compute monitor_flash_len. Use _end instead. Add _end to linker scripts for end of u-boot image Add _end_ofs to all the start.S. Signed-off-by: NPo-Yu Chuang <ratbert@faraday-tech.com>
-
由 Po-Yu Chuang 提交于
Currently, _end is used for end of BSS section. We want _end to mean end of u-boot image, so we rename _end to __bss_end__ first. Signed-off-by: NPo-Yu Chuang <ratbert@faraday-tech.com>
-
- 21 2月, 2011 5 次提交
-
-
由 Fabio Estevam 提交于
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Fabio Estevam 提交于
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NMagnus Lilja <lilja.magnus@gmail.com> Tested-by: NMagnus Lilja <lilja.magnus@gmail.com>
-
由 Lei Wen 提交于
Pantheon Family processors are highly integrated SoCs based on Sheeva_88SV331x-v5 PJ1 cpu core. Ref: http://www.marvell.com/products/processors/communications/marvell_pantheon_910_920_pb.pdf SoC versions Supported: 1) PANTHEON920 (TD) 2) PANTHEON910 (TTC) Signed-off-by: NLei Wen <leiwen@marvell.com>
-
由 Alexander Stein 提交于
Signed-off-by: NAlexander Stein <alexander.stein@informatik.tu-chemnitz.de>
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 02 2月, 2011 11 次提交
-
-
由 Minkyu Kang 提交于
S5PC210 is a 32-bit RISC and Cortex-A9 Dual Core based micro-processor. Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Heiko Schocher 提交于
Reuse the gd->tbl value for timestamp and add gd->lastinc for lastinc bss values in the arm926ejs timers implementation. The usage of bss values in drivers before initialisation of bss is forbidden. In that special case some data in .rel.dyn gets corrupted. This patch is similiar to the patch Dirk Behme posted for the armv7/omap-common/timer.c and added suggestions from Reinhard Meyer. Tested on the arm926ejs mx27 based magnesium board Tested on the arm926ejs kirkwood based suen3 board Signed-off-by: NHeiko Schocher <hs@denx.de> cc: Albert ARIBAUD <albert.aribaud@free.fr> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Stefano Babic <sbabic@denx.de> cc: Reinhard Meyer <u-boot@emk-elektronik.de>
-
由 Jens Scharsig 提交于
* remove LED initialization in front of relocation and bss init Signed-off-by: NJens Scharsig <js_at_ng@scharsoft.de>
-
由 Heiko Schocher 提交于
Reuse the gd->tbl value for timestamp and add gd->lastinc for lastinc bss values in the arm1136 timer driver for mx31 and omap24xx The usage of bss values in drivers before initialisation of bss is forbidden. In that special case some data in .rel.dyn gets corrupted. This patch is similiar to the patch Dirk Behme posted for the armv7/omap-common/timer.c Tested on the mx31 based qong board Signed-off-by: NHeiko Schocher <hs@denx.de> cc: Albert ARIBAUD <albert.aribaud@free.fr> Acked-by: NAlbert ARIBAUD <albert.aribaud@free.fr>
-
由 Liu Hui-R64343 提交于
Remove the useless code from start.S Signed-off-by: NJason Liu <r64343@freescale.com> Tested-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Minkyu Kang 提交于
Because of the bss area is cleared after relocation, we've lost pointers. This patch fixed it. Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Sandeep Paulraj 提交于
The option CONFIG_SOC_DM6447 seems to have ended up in the code by mistake. It is not used anywhere and there is no chip called DM6447. Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Sandeep Paulraj 提交于
This commit fixes build errors on the DM6467 port. Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Sandeep Paulraj 提交于
Added arch/arm/cpu/arm926ejs/davinci/et1011c.c for handling ET1011C gigabit phy. which overrides get_link_speed function from default implementation. This enables output of 125 MHz reference clock on SYS_CLK pin. Signed-off-by: NPrakash PM <prakash.pm@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Stefano Babic 提交于
The usage of bss values in drivers before initialisation of bss is forbidden. In that special case some data in .rel.dyn gets corrupted. This patch is the same as recently applied for arm926js architecture. Signed-off-by: NStefano Babic <sbabic@denx.de> CC: Heiko Schocher <hs@denx.de>
-
由 Stefano Babic 提交于
The patch adds basic support for the Freescale's i.MX35 (arm1136 based) processor. The patch adds also a prototype for the initialization of the FEC(ethernet controller) to netdev.h to avoid warnings. Signed-off-by: NStefano Babic <sbabic@denx.de>
-