- 07 1月, 2020 40 次提交
-
-
由 Baruch Siach 提交于
These DT files are copied from kernel v5.3 with no changes. This is part 1 of 2 commits. Included are DT files for the original Cubox-i and Hummingboard Base/Pro. Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Reviewed-by: NFabio Estevam <festevam@gmail.com>
-
由 Baruch Siach 提交于
Import fsl-imx-audmux.h from Linux as of v5.4-rc6. The header is unchanged since v4.18. That would make it easier to import DT files that depend on imx-audmux definitions from the kernel tree. Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Reviewed-by: NFabio Estevam <festevam@gmail.com>
-
由 Robert Beckett 提交于
Enable DM imx WDT Enable SYSRESET_WATCHDOG to maintain WDT based reset ability Signed-off-by: NRobert Beckett <bob.beckett@collabora.com>
-
由 Robert Beckett 提交于
Enable DM imx WDT Enable SYSRESET_WATCHDOG to maintain WDT based reset ability Signed-off-by: NRobert Beckett <bob.beckett@collabora.com>
-
由 Ian Ray 提交于
Pass rtc_status via the device tree, instead of on kernel command line. Additionally, the 2038 mitigation is reported, if applied successfully. Signed-off-by: NIan Ray <ian.ray@ge.com> Signed-off-by: NRobert Beckett <bob.beckett@collabora.com>
-
由 Denis Zalevskiy 提交于
DM for PCI pulls DM for ethernet that also needs other changes described below to build u-boot and keep existing functionality - ability to update MAC addresses of FEC ethernet adapter and I210 adapter connected to the Marvell switch. - fec_mxc driver with DM needs PHYLIB; - configuration items are moved from ge_bx50v3.h to ge_bx50v3_defconfig; - FEC is marked as eth0 because it is always present, so indices changed: I210 are still probed in the same order; - board_eth_init() was used by legacy ethernet, setup for enet iomux and pcie is moved to the board_late_init(); - pci_init() is called from the board_late_init() to initiate PCI bus probing, so I210 devices are propagated to the device tree; Signed-off-by: NDenis Zalevskiy <denis.zalevskiy@ge.com> [Describe PHY reset in device tree] Signed-off-by: NIan Ray <ian.ray@ge.com> Signed-off-by: NRobert Beckett <bob.beckett@collabora.com>
-
由 Denis Zalevskiy 提交于
DM should be used for USB since 2019.07, it also requires DM for regulators. Signed-off-by: NDenis Zalevskiy <denis.zalevskiy@ge.com> Signed-off-by: NRobert Beckett <bob.beckett@collabora.com>
-
由 Ian Ray 提交于
Use vidconsole for output to the LCD, now that DM_VIDEO is used. Write white text on a black background, like before migrating to DM_VIDEO. Signed-off-by: NIan Ray <ian.ray@ge.com> Signed-off-by: NRobert Beckett <bob.beckett@collabora.com>
-
由 Ian Ray 提交于
Fix GPIO reservation warning on code paths that do not need LVDS power. Signed-off-by: NIan Ray <ian.ray@ge.com> Signed-off-by: NRobert Beckett <bob.beckett@collabora.com>
-
由 Ian Ray 提交于
Fixes commit: 0b09f7b1, which converted to DM_VIDEO, but requires more memory. [Inspired by 9002e735] Signed-off-by: NIan Ray <ian.ray@ge.com> Signed-off-by: NRobert Beckett <bob.beckett@collabora.com>
-
由 Robert Beckett 提交于
Copy device tree from linux for PPD. Signed-off-by: NRobert Beckett <bob.beckett@collabora.com>
-
由 Robert Beckett 提交于
Copy device trees from linux, keeping them as separate files for each board to ease future sync. Update board code to use generic bx50v3 dt initially, then select the specific dt based on board detection. Signed-off-by: NRobert Beckett <bob.beckett@collabora.com>
-
由 Lukasz Majewski 提交于
This patch introduces support for i.MX28 based XEA board. This board supports DM/DTS in U-Boot proper as well as DM aware drivers in SPL (u-boot.sb) by using OF_PLATDATA. More detailed information regarding usage of it can be found in ./board/liebherr/xea/README file. U-Boot SPL 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) Trying to boot from MMC1 MMC0: Command 8 timeout (status 0xf0344020) mmc_load_image_raw_sector: mmc block read error U-Boot 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) CPU: Freescale i.MX28 rev1.2 at 454 MHz BOOT: SSP SPI #3, master, 3V3 NOR Model: Liebherr (LWE) XEA i.MX28 Board DRAM: 128 MiB MMC: MXS MMC: 0 Loading Environment from SPI Flash... SF: Detected n25q128a13 with page size 256 Bytes, erase size 64 KiB, total 16 MiB OK In: serial Out: serial Err: serial Net: Warning: ethernet@800f0000 (eth0) using random MAC address - ce:e1:9e:46:f3:a2 eth0: ethernet@800f0000 Hit any key to stop autoboot: 0 Signed-off-by: NLukasz Majewski <lukma@denx.de>
-
由 Heiko Schocher 提交于
add support for revision C boards. This board has no longer a NAND. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
add aristainetso board version CSL. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
readd aristainetos 2b board. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
enable IMX_HAB on aristianetos board Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
sync defaut Envoronment with customer changes. Unfortunately they are not changeable, as already board is in production mode. Get rid of the big bootcommand and set bootcommand through Kconfig option. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
enable config symbols: CONFIG_SYSRESET CONFIG_SYSRESET_WATCHDOG Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
on the aristainetos there are some jumpers for changing behaviour setting up Environment. Clean this up. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
add VERSION_VARIABLE Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
add stop autobooting via SHA256 encrypted password. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
add support for i2c eeprom and add parsing "Rescue" or "DefEnv" at offset 0x1ff0. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
CONFIG_BOARDNAME is not longer needed, as we use the model information from DTS. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
use DM_PWM and DM_BLACKLIGHT support and remove board code. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
enable DM_I2C in defconfig and remove i2c specific board code. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
add DM_VIDEO support and remove now unneeded board code. As we show a bmp logo on boot, call now bmp_display() from board code and do not use cfb_console anymore. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
enable DM_ETH and remove unneeded board code. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
enable CONFIG_DM_SPI and CONFIG_DM_SPI_FLASH and get rid of build removal warnings. define CONFIG_GPIO_ENABLE_SPI_FLASH is not longer needed, so remove it from config_whitelist.txt Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
Drop CONFIG_USB_MAX_CONTROLLER_COUNT and enable DM_USB in defconfig. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
Enable DM_GPIO, GPIO_HOG, LED and LED_GPIO as gpio and LEDs are now defined in DTS. Enable also here the pinctrl driver, so pinmux setup is also done. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
Enable DM_MMC support. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
add DM_SERIAL support for the aristainetos board, and remove not used code from board code. remove CONSOLE_OVERWRITE_ROUTINE. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
as we switch to support DM and DTS, rework the existing DTS trees. Change also Linux specific Device trees, goal is to push this changes to linux. Collect U-Boot specific changes in separate "*u-boot*" dts files. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
remove aristainetos-v2.c file, as we now want to switch to DM/DTS support and have all board specific code in one file. Goal is to setup differences through DT. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
add thumb build to aristainetos build to save binary space. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
Add device trees from Linux in preparation for driver model conversions. device tree files taken from Linux: 71ae5fc87c34: "Merge tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest" and added SPDX license identifier. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
gigabit support does not work on the aristainetos board, so disable it. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
remove 2b version of aristainetos board, as it is easier to make the DM / DTS port and introduce the 2b board version again (also some more board version). Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
move defines, which are already moved to Kconfig out of board config. Signed-off-by: NHeiko Schocher <hs@denx.de>
-