board: ge: bx50v3: Enable DM for PCI and ethernet

DM for PCI pulls DM for ethernet that also needs other changes described
below to build u-boot and keep existing functionality - ability to update
MAC addresses of FEC ethernet adapter and I210 adapter connected to the
Marvell switch.

- fec_mxc driver with DM needs PHYLIB;

- configuration items are moved from ge_bx50v3.h to ge_bx50v3_defconfig;

- FEC is marked as eth0 because it is always present, so indices changed:
  I210 are still probed in the same order;

- board_eth_init() was used by legacy ethernet, setup for enet iomux and
  pcie is moved to the board_late_init();

- pci_init() is called from the board_late_init() to initiate PCI bus
  probing, so I210 devices are propagated to the device tree;
Signed-off-by: NDenis Zalevskiy <denis.zalevskiy@ge.com>
[Describe PHY reset in device tree]
Signed-off-by: NIan Ray <ian.ray@ge.com>
Signed-off-by: NRobert Beckett <bob.beckett@collabora.com>

board/ge/bx50v3/bx50v3.c

@@ -36,6 +36,8 @@
 #include "../common/ge_common.h"
 #include "../common/vpd_reader.h"
 #include "../../../drivers/net/e1000.h"
+#include <pci.h>
+
 DECLARE_GLOBAL_DATA_PTR;
 
 static int confidx;  /* Default to generic. */
@@ -83,38 +85,6 @@ static iomux_v3_cfg_t const uart4_pads[] = {
 	MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 };
 
-static iomux_v3_cfg_t const enet_pads[] = {
-	MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_ENET_MDC__ENET_MDC   | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_ENET_REF_CLK__ENET_TX_CLK  | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL),
-	MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
-	MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
-	MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
-	MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
-	MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
-	MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
-	/* AR8033 PHY Reset */
-	MX6_PAD_ENET_TX_EN__GPIO1_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-static void setup_iomux_enet(void)
-{
-	imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
-
-	/* Reset AR8033 PHY */
-	gpio_request(IMX_GPIO_NR(1, 28), "fec_rst");
-	gpio_direction_output(IMX_GPIO_NR(1, 28), 0);
-	mdelay(10);
-	gpio_set_value(IMX_GPIO_NR(1, 28), 1);
-	mdelay(1);
-}
-
 static struct i2c_pads_info i2c_pad_info1 = {
 	.scl = {
 		.i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | I2C_PAD,
@@ -154,16 +124,6 @@ static struct i2c_pads_info i2c_pad_info3 = {
 	}
 };
 
-static iomux_v3_cfg_t const pcie_pads[] = {
-	MX6_PAD_GPIO_5__GPIO1_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-static void setup_pcie(void)
-{
-	imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads));
-}
-
 static void setup_iomux_uart(void)
 {
 	imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
@@ -455,7 +415,7 @@ static int vpd_callback(struct vpd_cache *vpd, u8 id, u8 version, u8 type,
 
 static void process_vpd(struct vpd_cache *vpd)
 {
-	int fec_index = -1;
+	int fec_index = 0;
 	int i210_index = -1;
 
 	if (!vpd->is_read) {
@@ -463,41 +423,30 @@ static void process_vpd(struct vpd_cache *vpd)
 		return;
 	}
 
+	if (vpd->has & VPD_HAS_MAC1)
+		eth_env_set_enetaddr_by_index("eth", fec_index, vpd->mac1);
+
+	env_set("ethact", "eth0");
+
 	switch (vpd->product_id) {
 	case VPD_PRODUCT_B450:
 		env_set("confidx", "1");
-		i210_index = 0;
-		fec_index = 1;
+		i210_index = 1;
 		break;
 	case VPD_PRODUCT_B650:
 		env_set("confidx", "2");
-		i210_index = 0;
-		fec_index = 1;
+		i210_index = 1;
 		break;
 	case VPD_PRODUCT_B850:
 		env_set("confidx", "3");
-		i210_index = 1;
-		fec_index = 2;
+		i210_index = 2;
 		break;
 	}
 
-	if (fec_index >= 0 && (vpd->has & VPD_HAS_MAC1))
-		eth_env_set_enetaddr_by_index("eth", fec_index, vpd->mac1);
-
 	if (i210_index >= 0 && (vpd->has & VPD_HAS_MAC2))
 		eth_env_set_enetaddr_by_index("eth", i210_index, vpd->mac2);
 }
 
-int board_eth_init(bd_t *bis)
-{
-	setup_iomux_enet();
-	setup_pcie();
-
-	e1000_initialize(bis);
-
-	return cpu_eth_init(bis);
-}
-
 static iomux_v3_cfg_t const misc_pads[] = {
 	MX6_PAD_KEY_ROW2__GPIO4_IO11	| MUX_PAD_CTRL(NO_PAD_CTRL),
 	MX6_PAD_EIM_A25__GPIO5_IO02	| MUX_PAD_CTRL(NC_PAD_CTRL),
@@ -659,6 +608,8 @@ int board_late_init(void)
 
 	check_time();
 
+	pci_init();
+
 	return 0;
 }
 

configs/ge_bx50v3_defconfig

@@ -75,3 +75,11 @@ CONFIG_IMX_WATCHDOG=y
 # CONFIG_EFI_LOADER is not set
 CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_PNP=y
+CONFIG_DM_ETH=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_FEC_MXC=y
+CONFIG_ETHPRIME="FEC"

include/configs/ge_bx50v3.h

@@ -49,16 +49,6 @@
 #define CONFIG_USB_GADGET_MASS_STORAGE
 #endif
 
-/* Networking Configs */
-#ifdef CONFIG_NET
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE			ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE		RGMII
-#define CONFIG_ETHPRIME		"FEC"
-#define CONFIG_FEC_MXC_PHYADDR		4
-#define CONFIG_PHY_ATHEROS
-#endif
-
 /* Serial Flash */
 
 /* allow to overwrite serial and ethaddr */
@@ -194,8 +184,6 @@
 
 #define CONFIG_IMX6_PWM_PER_CLK	66000000
 
-#define CONFIG_PCI
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)