- 13 9月, 2017 1 次提交
-
-
由 Adam Ford 提交于
Enable TI_COMMON_CMD_OPTIONS and remove similar options from the defconfig. Updated with savedefconfig. Signed-off-by: NAdam Ford <aford173@gmail.com> Tested-by: NDerald D. Woods <woods.technical@gmail.com>
-
- 12 9月, 2017 4 次提交
-
-
由 Wenyou Yang 提交于
Add the code to set the ethernet mac address from eeprom by using the common code from the common folder. Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Wenyou Yang 提交于
Replace the code to set the ethernet mac address with the code from the common folder. Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Lokesh Vutla 提交于
Add support for selecting proper dtb for am57xx BeagleBoard X15 revC u-boot from FIT Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Lokesh Vutla 提交于
Add support for selecting proper dtb for dra76x u-boot from FIT. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 11 9月, 2017 4 次提交
-
-
由 Hou Zhiqiang 提交于
Enabled PCIe support and PCI command feature. Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Ashish Kumar 提交于
This patch add support of LS1088AQDS platform. The LS1088A QorIQTM Development System (QDS) is a high-performance computing, evaluation, and development platform that supports the LS1088A QorIQ Architecture processor. Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: NShaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: NAshish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Ashish Kumar 提交于
LS1088A is an ARMv8 implementation. The LS1088ARDB is an evaluatoin platform that supports the LS1088A family SoCs. This patch add basic support of the platform. Signed-off-by: NAlison Wang <alison.wang@nxp.com> Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: NAshish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: NRaghav Dogra <raghav.dogra@nxp.com> Signed-off-by: NShaohui Xie <Shaohui.Xie@nxp.com> [YS: Disabled NAND in board header file] Reviewed-by: NYork Sun <york.sun@nxp.com> WIP: disable NAND for LS1088ARDB
-
由 Udit Agarwal 提交于
Signed-off-by: NUdit Agarwal <udit.agarwal@nxp.com> [YS: dropped redundant commit message] Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 09 9月, 2017 1 次提交
-
-
由 Tom Rini 提交于
This board does dwc3 gadget, not host, so we cannot have host support or we will fail to link. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 08 9月, 2017 4 次提交
-
-
由 Chris Packham 提交于
This migrates ASIX, ASIX88179, MCS7830, RTL8152 and SMSC95XX to Kconfig. Update defconfigs. Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Chris Packham 提交于
CONFIG_USB_HOST_ETHER is the framework that the drivers are dependent on USB_HOST_ETHER. Use this as a menu and move the existing LAN75XX and LAN78XX options under new menu. Finally update the defconfigs that need CONFIG_USB_HOST_ETHER. Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Marek Vasut 提交于
Disable CONFIG_ARCH_FIXUP_FDT_MEMORY to prevent U-Boot from modifying the memory {} nodes in the DT passed to the Linux kernel. The R8A779x DT contains multiple memory {} nodes, while U-Boot only modifies the first one and stuffs all the memory entries into it, which is wrong. Disabling CONFIG_ARCH_FIXUP_FDT_MEMORY is the least intrusive way to fix the issue this close to the release, while the real fix is to extend the fdt_fixup_memory_banks() to handle multiple memory nodes in DT. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 07 9月, 2017 1 次提交
-
-
由 Paul Barker 提交于
This reverts commit 25877d4e. This is a workaround for Raspberry Pi boot failures seen when passing on the device tree provided by the Raspberry Pi firmware at boot. Without CONFIG_OF_EMBED, we just get stuck at "Starting kernel ..." when we try to boot Linux with this device tree. Signed-off-by: NPaul Barker <pbarker@toganlabs.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: NJonathan Gray <jsg@jsg.id.au> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 05 9月, 2017 2 次提交
-
-
由 Kever Yang 提交于
enable the ATF option and SDCard in defconfig. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Wadim Egorov 提交于
Read SoM information from EEPROM and set ethaddr in late init. Signed-off-by: NWadim Egorov <w.egorov@phytec.de> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
- 04 9月, 2017 1 次提交
-
-
由 Derald D. Woods 提交于
- Pass MTDPARTS kernel arguments to kernel - Use Kconfig CONFIG_NAND instead of CONFIG_SYS_EXTRA_OPTIONS="NAND" - Call 'usb_stop' on kernel start - Update Falcon mode setup to match other OMAP3 boards - Use "uEnv.txt" as boot script instead of "boot.scr"
-
- 03 9月, 2017 1 次提交
-
-
由 Adam Ford 提交于
Add the following options to drivers/misc/Kconfig: SYS_I2C_EEPROM_ADDR SYS_I2C_EEPROM_BUS SYS_EEPROM_SIZE SYS_EEPROM_PAGE_WRITE_BITS SYS_EEPROM_PAGE_WRITE_DELAY_MS SYS_I2C_EEPROM_ADDR_LEN SYS_I2C_EEPROM_ADDR_OVERFLOW This does not migrate any boards, but provides a foundations for those who want/need these options Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Migrate uniphier] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 02 9月, 2017 4 次提交
-
-
由 Adam Ford 提交于
Manually enable SYS_NAND_U_BOOT_LOCATIONS. Set CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 and remove it from header Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_BCH Signed-off-by: NAdam Ford <aford173@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
- Move ANDROID_IMAGE_SUPPORT to top level Kconfig under images as it's not strictly part of fastboot. - Add some defaults for the fastboot buffer location and size - Migrate all options listed in cmd/fastboot/Kconfig - Cleanup the README Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This syncs all of the currently Kconfig'd symbols out of the headers and into the defconfig files. This has two exceptions, first am335x_evm needs to be converted to DM in SPL and then it can stop undef'ing CONFIG_DM_USB. Leaving this as-is results in a build failure, and without work, run time failure. The other case is am43xx_evm.h and in turn am43xx_evm_usbhost_boot. The problem here is that we need DWC3 USB host mode in SPL, but still desire to have gadget mode in U-Boot proper. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 30 8月, 2017 4 次提交
-
-
由 Jagan Teki 提交于
Add Falcon mode support in Engicam i.CoreM6 board. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
由 Masahiro Yamada 提交于
Now the entry to the NAND driver init can be is controlled by DT; it should not hurt to compile the driver all the time. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
This imply was added when the option was moved by the moveconfig tool, but the intention is not clear. Move it to defconfig. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Migrate to the DT-based NAND init entry. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 29 8月, 2017 2 次提交
-
-
由 Jagan Teki 提交于
U-Boot proper is using DM_MMC so, enable CONFIG_BLK otherwise find_mmc_device failed to detect MMC device. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NStefano Babic <sbabic@denx.de>
-
由 Jagan Teki 提交于
Add CONFIG_MMC_SUNXI_SLOT_EXTRA=2 to use eMMC on BPI_M3 board. Cc: Chen-Yu Tsai <wens@csie.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Tested-by: NJagan Teki <jagan@amarulasolutions.com>
-
- 28 8月, 2017 2 次提交
-
-
由 Bin Meng 提交于
This enables NVMe driver on sandbox for build testing. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 27 8月, 2017 5 次提交
-
-
由 Pau Pajuelo 提交于
Update igep00x0 code with the following features: - Add board and revision detection for the boards: - IGEP0020-RF - IGEP0020-RC - IGEP0030-RG - IGEP0030-RE - Merge IGEP0020 and IGEP0030 mux tables - Add suport to use GPIO_126, GPIO_127 and GPIO_129 - board_name and board_rev environment variables display board and revision informations - Move dtb name selection from code to boot script Signed-off-by: NPau Pajuelo <ppajuel@gmail.com> Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Tested-by: NPau Pajuelo <ppajuel@gmail.com>
-
由 Semen Protsenko 提交于
Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>
-
由 Semen Protsenko 提交于
Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>
-
Use the Atmel PIT timer driver which supports the driver model and device tree. Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
-
由 Simon Glass 提交于
This is currently disabled, so USB keyboards are not detected in U-Boot. Enable this option to fix that. Signed-off-by: NSimon Glass <sjg@chromium.org> Tested-by: NJonathan Gray <jsg@jsg.id.au> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Tested-by: NPaul Barker <pbarker@toganlabs.com>
-
- 26 8月, 2017 4 次提交
-
-
由 Marek Vasut 提交于
Enable the MMC and USB DM on the board since it's the modern method and now supported by the drivers. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Enable the MMC and USB DM on the board since it's the modern method and now supported by the drivers. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
The HUSH parser was disabled somewhere along the way, reenable it. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Alexandru Gagniuc <alex.g@adaptrum.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Commit da3b9e7f (Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig) broke ethernet support on R8A779x Salvator-X boards by disabling the KSZ90x1 PHY in Kconfig. Reenable it. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Alexandru Gagniuc <alex.g@adaptrum.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-