board: sama5d4_xplained: Set mac address from eeprom

Add the code to set the ethernet mac address from eeprom by using
the common code from the common folder.
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

arch/arm/dts/at91-sama5d4_xplained.dts

@@ -88,6 +88,11 @@
 
 			i2c0: i2c@f8014000 {
 				status = "okay";
+
+				i2c_eeprom: i2c_eeprom@5c {
+					compatible = "atmel,24mac402";
+					reg = <0x5c>;
+				};
 			};
 
 			macb0: ethernet@f8020000 {

board/atmel/sama5d4_xplained/sama5d4_xplained.c

@@ -192,6 +192,18 @@ int board_early_init_f(void)
 }
 #endif
 
+#define AT24MAC_MAC_OFFSET	0x9a
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+#ifdef CONFIG_I2C_EEPROM
+	at91_set_ethaddr(AT24MAC_MAC_OFFSET);
+#endif
+	return 0;
+}
+#endif
+
 int board_init(void)
 {
 	/* adress of boot parameters */

configs/sama5d4_xplained_mmc_defconfig

@@ -47,6 +47,9 @@ CONFIG_AT91_UTMI=y
 CONFIG_AT91_H32MX=y
 CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_DM_SPI_FLASH=y

configs/sama5d4_xplained_nandflash_defconfig

@@ -44,6 +44,9 @@ CONFIG_AT91_UTMI=y
 CONFIG_AT91_H32MX=y
 CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_DM_SPI_FLASH=y

configs/sama5d4_xplained_spiflash_defconfig

@@ -46,6 +46,9 @@ CONFIG_AT91_UTMI=y
 CONFIG_AT91_H32MX=y
 CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_DM_SPI_FLASH=y

include/configs/sama5d4_xplained.h

@@ -12,6 +12,8 @@
 
 #include "at91-sama5_common.h"
 
+#define CONFIG_MISC_INIT_R
+
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS