- 05 3月, 2008 2 次提交
-
-
由 Stefan Roese 提交于
This patch fixes a problem seen on PPC4xx boards, when no MAC address is defined. Then no ethernet interface is available but a simple "tftp" command will return without any error message which is quite confusing. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Jon Loeliger 提交于
Many of the spd.h #includers don't need it, and wanted to have spd_sdram() declared instead. Since they didn't get that, some also had open coded extern declarations of it instead or as well. Fix it all up by using spd_sdram.h where needed. Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
- 04 3月, 2008 3 次提交
-
-
由 Timur Tabi 提交于
Fix a typo in qe_upload_firmware() that prevented uploading firmware on systems with more than one RISC core. Signed-off-by: NTimur Tabi <timur@freescale.com>
-
由 Bernhard Nemec 提交于
Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>, see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846 Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
-
由 Kim B. Heino 提交于
If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash routines instead of dataflash. This is because it checks "if source address is not dataflash" instead of target address. Signed-off-by: NKim B. Heino <Kim.Heino@bluegiga.com>
-
- 03 3月, 2008 26 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 michael 提交于
This fixes the cluster size tests in the FAT32 file system. The current implementation of VFAT support doesn't work if the referred cluster has an offset > 16bit representation, causing "fatload" and "fatls" commands etc. to fail. Signed-off-by: Nmichael trimarchi <trimarchi@gandalf.sssup.it>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Stefan Roese 提交于
The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But currently 4k/2k is configured. This patch fixes this issue. Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Woodruff, Richard 提交于
Fix alignment fault on ARM when running modules. With out an explicit linker file gcc4.2.1 will half word align __bss_start's value. The word dereference will crash hello_world. signed-off-by Richard Woodruff <r-woodruff2@ti.com>
-
由 Dave Liu 提交于
The ext2 aligned process will corrupt the key data struct, the patch fix this. Signed-off-by: NDave Liu <daveliu@freescale.com>
-
由 Wolfgang Denk 提交于
Make sure CDPATH settings cannot interfere. Update CHANGELOG. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Li Yang 提交于
Add cscope build target to generate cscope database for code browsing. Signed-off-by: NLi Yang <leoli@freescale.com>
-
由 Kim Phillips 提交于
erratum 5.6 states the autoneg completion bit is functional only if the autoneg bit is asserted. This fixes any secondarily-issued networking commands on non-gigabit links on the mpc8360 mds board. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
-
由 John Rigby 提交于
Adds PCI support for MPC5121 Tested with drivers/net/rtl8139.c Support is conditional since PCI on old silicon does not work. ads5121_PCI_config turns on PCI In this version, condition compilation of PCI code has been moved from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as suggested by Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: NJohn Rigby <jrigby@freescale.com>
-
由 Anatolij Gustschin 提交于
Fix warnings while compilation with new gcc in eldk-4.2 Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
-
由 Anatolij Gustschin 提交于
U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is enabled. To reproduce the problem ensure that 'ethrotate' environment variable isn't set to "no" and then run "tftp 200000 not_existent_file". This patch tries to fix the issue. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Currently (since commit b2e2142c) u-boot crashes on sequoia board while SPR test if CONFIG_4xx_DCACHE is enabled. This patch disables the cache while SPR test. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Martin Krause 提交于
Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S, TB5200 and TB5200_B to fixup the /memory node with the memory values detected by U-Boot. Signed-off-by: NMartin Krause <martin.krause@tqs.de>
-
-
git://www.denx.de/git/u-boot-arm由 Wolfgang Denk 提交于
Conflicts: include/asm-arm/arch-imx/imx-regs.h Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Martin Krause 提交于
Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S, TB5200 and TB5200_B to fixup the /memory node with the memory values detected by U-Boot. Signed-off-by: NMartin Krause <martin.krause@tqs.de>
-
由 Martin Krause 提交于
This patch fixes a bug in the SDRAM initialization code for the TQM5200. The hi_addr bit is now set correctly. Without this patch the hi_addr bit is always set to 1, if the second SDRAM bank is not populated. For other MPC5200 boards a correspondig patch has already been applied some time ago, see commit a6310928. Signed-off-by: NMartin Krause <martin.krause@tqs.de> -- Forget the first patch please. I confused flash with SDRAM in the comment ...
-
"pointer targets in assignment differ in signedness" Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Sync register definitions with linux Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- actua1: actux1.c: In function 'checkboard': actux1.c:92: warning: unused variable 'revision' - actua2: actux2.c: In function 'checkboard': actux2.c:100: warning: unused variable 's' actux2.c:99: warning: unused variable 'revision' actux2.c: In function 'reset_phy': actux2.c:130: warning: unused variable 'i' - actua3: actux3.c: In function 'checkboard': actux3.c:114: warning: unused variable 'revision' Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Shinya Kuribayashi 提交于
The previous patch was lacking of i386, microblaze, nios and nios2. This patch tries to fix them. Signed-off-by: NShinya Kuribayashi <skuribay@ruby.dti.ne.jp>
-
- 28 2月, 2008 5 次提交
-
-
由 Kumar Gala 提交于
There is no reason to icbi when invalidating the temporary stack in the d-cache. Its impossible on e500 to have the i-cache contain any addresses in the temp stack and it can be problematic in generating transactions on the bus to non-valid addresses. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Andy Fleming 提交于
The source vector for the ECM was being set to 2, but that's what the source vector for DDR was being set to. Change it to 1. Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Andy Fleming 提交于
Commit 0db37dc2... (and some others) changed the INIT_RAM TLB mappings to be unguarded. This collided with an existing "bug" where the mappings for the INIT_RAM were being kept around. This meant that speculative loads to those addresses were succeeding in the TLB, and going out to the bus, where they were causing an exception (there's nothing at that address). The Flash code was coincidentally causing such a speculative load. Rather than go back to mapping the INIT RAM as guarded, we fix it so that the entries for the INIT_RAM are invalidated. Thus the speculative loads will fail in the TLB, and have no effect. Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 26 2月, 2008 1 次提交
-
-
由 Jon Loeliger 提交于
Back in commit a551cee9 (86xx: Fix GUR PCI config registers properly), we should have changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL symbols in the sbc8641d board as well. Fix this oversight. Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
- 25 2月, 2008 3 次提交
-
-
由 Stefan Roese 提交于
Don't include testdram() on NAND-booting target acadia_nand. This saves a few bytes and makes the target build clean again. Signed-off-by: NStefan Roese <sr@denx.de>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Sync registers definition with linux Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-