net: uec_phy: handle 88e1111 rev.B2 erratum 5.6

erratum 5.6 states the autoneg completion bit is functional only if the
autoneg bit is asserted.

This fixes any secondarily-issued networking commands on non-gigabit
links on the mpc8360 mds board.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

drivers/qe/uec_phy.c

@@ -574,6 +574,7 @@ void marvell_phy_interface_mode (struct eth_device *dev,
 {
 	uec_private_t *uec = (uec_private_t *) dev->priv;
 	struct uec_mii_info *mii_info;
+	u16 status;
 
 	if (!uec->mii_info) {
 		printf ("%s: the PHY not intialized\n", __FUNCTION__);
@@ -609,6 +610,13 @@ void marvell_phy_interface_mode (struct eth_device *dev,
 		phy_write (mii_info, 0x00, 0x8100);
 		udelay (1000000);
 	}
+
+	/* handle 88e1111 rev.B2 erratum 5.6 */
+	if (mii_info->autoneg) {
+		status = phy_read (mii_info, PHY_BMCR);
+		phy_write (mii_info, PHY_BMCR, status | PHY_BMCR_AUTON);
+	}
+	/* now the B2 will correctly report autoneg completion status */
 }
 
 void change_phy_interface_mode (struct eth_device *dev, enet_interface_e mode)