- 14 7月, 2009 4 次提交
-
-
由 Wolfgang Denk 提交于
-
-
由 Wolfgang Denk 提交于
-
-
- 11 7月, 2009 8 次提交
-
-
由 Kumar Gala 提交于
ehci-hcd.c: In function 'ehci_submit_root': ehci-hcd.c:719: warning: value computed is not used ehci-hcd.c:748: warning: value computed is not used Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NRemy Bohmer <linux@bohmer.net>
-
由 Matthias Fuchs 提交于
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
-
由 Peter Tyser 提交于
* Remove symlinking of files located outside api_examples/ * Auto generate dependencies for files located outside api_examples/ * Update names of variables to be similar to those in tools/Makefile * Fix out of tree build error Dependencies are calculated for all files in the SRCS variable. Previously, the SRCS variable contained files which were symlinked into the api_examples/ directory. These symlinked files did not exist when dependencies were calculated when building out of tree. This resulted in errors such as: make[1]: *** No rule to make target `/work/wd/tmp-ppc/api_examples/.depend', needed by `_depend'. Stop. make[1]: Leaving directory `/home/wd/git/u-boot/work/api_examples' make: *** [depend] Error 2 Since symlinked source files are no longer used, this bug no longer exists. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Acked-by: NRafal Jaworowski <raj@semihalf.com>
-
由 Peter Tyser 提交于
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Acked-by: NRafal Jaworowski <raj@semihalf.com>
-
由 Peter Tyser 提交于
Combining the two rules cleans up the Makefile a bit Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Acked-by: NRafal Jaworowski <raj@semihalf.com>
-
由 Peter Tyser 提交于
This cleans up the Makefile a bit and simplifies future changes Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Acked-by: NRafal Jaworowski <raj@semihalf.com>
-
由 Timur Tabi 提交于
The KSEG1ADDR macro used to be necessary for the RTL8139 Ethernet driver, but the code that used that macro was removed over a year ago, so board configuration files no longer need to define it. The _IO_BASE macro is also automatically defined to 0 if it isn't already set, so there's no need to define that macro either in the board configuration files. Signed-off-by: NTimur Tabi <timur@freescale.com> Acked-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: NAndy Fleming <afleming@freescale.com> Acked-by: NAndre Schwarz <andre.schwarz@matrix-vision.de> Acked-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Mike Frysinger 提交于
The current kallsyms code is using \\0 to escape the backslash in the awk code, but the shell too needs escaping. This way we make sure gcc is passed the \0. Then gcc itself will consume this as an octal, so we have to use 000 so gcc will create the final NUL. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 10 7月, 2009 6 次提交
-
-
由 Prafulla Wadaskar 提交于
This driver is tested on Sheevaplug platform Signed-off-by: NPrafulla Wadaskar <prafulla@marvell.com> Signed-off-by: NRemy Bohmer <linux@bohmer.net>
-
由 Vivek Mahajan 提交于
It fixes the access to the 'ehci' struct elements for mpc83xx which should have been taken care of in 4ef01010 Sorry about that. Signed-off-by: NVivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: NRemy Bohmer <linux@bohmer.net>
-
由 Vivek Mahajan 提交于
This patch fixes the access to the 'ehci' struct elements which should have been taken care off in 4ef01010 Sorry about that. Signed-off-by: NVivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: NRemy Bohmer <linux@bohmer.net>
-
由 Bryan Wu 提交于
Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NRemy Bohmer <linux@bohmer.net>
-
由 Mike Frysinger 提交于
These functions are no longer defined, so remove their prototypes. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NRemy Bohmer <linux@bohmer.net>
-
由 Kim Phillips 提交于
fix a stray CONFIG_MPC83XX that escaped commit 0f898604. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NRemy Bohmer <linux@bohmer.net>
-
- 09 7月, 2009 7 次提交
-
-
由 Simon Kagstrom 提交于
Check that an argument is passed to ubifsmount and that addresses and sizes are actually numbers for ubifsload. Also improve the instructions a bit. Signed-off-by: NSimon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Simon Kagstrom 提交于
The VID header offset is sometimes needed to initialize the UBI partition. This patch adds it (optionally) to the command line for the ubi part command. (Lines have been properly wrapped since last version) Signed-off-by: NSimon Kagstrom <simon.kagstrom@netinsight.net> Acked-by: NStefan Roese <sr@denx.de> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
-
-
由 Wolfgang Denk 提交于
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de>
-
- 08 7月, 2009 15 次提交
-
-
由 Matthias Fuchs 提交于
This patch makes pll_write on PPC405EP boards global and callable from C code. pll_write can be used to dynamically modify the PLB:PCI divider as it is required for 33/66 MHz pci adapters based on the 405EP. board_early_init_f() is a good place to do that (check M66EN signal and call pll_write() when it is required). Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Matthias Fuchs 提交于
This patch implements the is_pci_host() function in a similiar way as it is used on 440 targets. The former path with CONFIG_PCI_HOST == PCI_HOST_AUTO does not build on 405EP targets because checking the PCI arbiter is different. So putting the fixed code into a separate function makes the code more readable. Also using is_pci_host() on 405 brings 405 and 440 PCI code a little bit closer. In preparation for an upcoming 405EP based PMC module I made this function weak so that it can be overwritten from board specific code. Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Alessio Centazzo 提交于
This patch fixes a debug compilation error for PPC4xx platforms, all other architectures are not affected by this change. The 'handler' pointer was undefined. The fix is exercised and has effect only if DEBUG is defined. Signed-off-by: Alessio Centazzo acpatin@yahoo.com Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Felix Radensky 提交于
This patch fixes printf format string compilation warnings in several debug statements. It also fixes the dump of DDR controller MQ registers found on some 44x and 46x platforms. The current register dump code uses incorrect DCRs to access these registers. Signed-off-by: NFelix Radensky <felix@embedded-sol.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Felix Radensky 提交于
This patch fixes 2 problems with FDT EBC mappings on Canyonlands. First, NAND EBC mapping was missing, making Linux NAND driver unusable on this board. Second, NOR remapping code assumed that NOR is always on CS0, however when booting from NAND NOR is on CS3. Signed-off-by: NFelix Radensky <felix@embedded-sol.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 HeungJun Kim 提交于
If use the onenand boot, the env_relocate_spec() calls mtd->read(), and the type of the argument #2 of mtd->read() was changed to loff_t. But, the "env_addr" type is still unsigned long, thus this patch change the type from unsigned long to loff_t. Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NHeungJun, Kim <riverful.kim@samsung.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Mingkai Hu 提交于
The bbt descriptors contains the pointer to the bbt pattern which are statically initialized memory struct. When relocated to RAM, these pointers will continue point to NOR flash(or L2 SRAM, or other boot device). If the contents of NOR flash changed or L2 SRAM disabled, it'll hang the system. Signed-off-by: NMingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Scott Wood 提交于
When adding large page NAND support to this file, I had a misunderstanding about the exact semantics of NAND_CTRL_CHANGE (which isn't documented anywhere I can find) -- it is apparently just a hint to drivers, which aren't required to preserve the old value for subsequent non-"change" invocations. This change makes nand_boot.c no longer assume this. Note that this happened to work by chance with some NAND drivers, which don't preserve the value, but treat 0 equivalently to NAND_CTRL_ALE. I don't have hardware to test this, so any testing is appreciated. Signed-off-by: NScott Wood <scottwood@freescale.com>
-
The S3C2410 NAND driver source file is included in the makefile instead of the object file. Signed-off-by: NKevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Guennadi Liakhovetski 提交于
Currently, when booting from NAND using nand_spl, in the beginning the default environment is used until later in boot process the dynamic environment is read out. This way environment variables that must be interpreted early, like the baudrate or "silent", cannot be modified dynamically and remain at their default values. Fix this problem by reading out main and redundand (if used) copies of the environment in the nand_spl code. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
nand_util currently uses size_t which is arch dependent and not always a unsigned long. Now use loff_t, as does the linux mtd layer. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Wolfgang Denk 提交于
The "nand markbad" and "onenand markbad" commands did not check if an argument was passed; if this was forgotten, no error was raised but block 0 was marked as bad. While fixing this bug, clean up the code a bit and allow to pass more than one block address, thus allowing to mark several blocks as bad in a single command invocation. Signed-off-by: NWolfgang Denk <wd@denx.de> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Mike Frysinger 提交于
The BF537-STAMP Blackfin board had a driver for working with NAND devices that are simply memory mapped. Since there is nothing Blackfin specific about this, generalize the driver a bit so that everyone can leverage it. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Guennadi Liakhovetski 提交于
Remove an unused "total" variable in multiple functions. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de> Signed-off-by: NScott Wood <scottwood@freescale.com>
-