remove _IO_BASE and KSEG1ADDR from board configuration files

The KSEG1ADDR macro used to be necessary for the RTL8139 Ethernet
driver, but the code that used that macro was removed over a year
ago, so board configuration files no longer need to define it.

The _IO_BASE macro is also automatically defined to 0 if it isn't
already set, so there's no need to define that macro either in the
board configuration files.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Acked-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: NAndy Fleming <afleming@freescale.com>
Acked-by: NAndre Schwarz <andre.schwarz@matrix-vision.de>
Acked-by: NKim Phillips <kim.phillips@freescale.com>

include/configs/HIDDEN_DRAGON.h

@@ -103,9 +103,7 @@
 #define PCI_ENET1_MEMADDR	0x81000000
 
 #define CONFIG_RTL8139
-#define _IO_BASE	    0x00000000
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x)	    (x)
+
 /* Make sure the ethaddr can be overwritten
    TODO: Remove this on final product
 */

include/configs/M5253DEMO.h

@@ -85,7 +85,6 @@
 #	define CONFIG_SYS_ATA_REG_OFFSET	0xA0	/* Offset for normal register accesses */
 #	define CONFIG_SYS_ATA_ALT_OFFSET	0xC0	/* Offset for alternate registers */
 #	define CONFIG_SYS_ATA_STRIDE		4	/* Interval between registers */
-#	define _IO_BASE			0
 #endif
 
 #define CONFIG_NET_MULTI		1

include/configs/M5253EVBE.h

@@ -91,7 +91,6 @@
 #define CONFIG_SYS_ATA_REG_OFFSET	0xA0	/* Offset for normal register accesses */
 #define CONFIG_SYS_ATA_ALT_OFFSET	0xC0	/* Offset for alternate registers */
 #define CONFIG_SYS_ATA_STRIDE		4	/* Interval between registers */
-#define _IO_BASE		0
 
 #define CONFIG_SYS_PROMPT		"=> "
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */

include/configs/M54455EVB.h

@@ -180,7 +180,6 @@
 #define CONFIG_SYS_ATA_REG_OFFSET	0xA0	/* Offset for normal register accesses */
 #define CONFIG_SYS_ATA_ALT_OFFSET	0xC0	/* Offset for alternate registers           */
 #define CONFIG_SYS_ATA_STRIDE		4	/* Interval between registers                 */
-#define _IO_BASE		0
 
 /* Realtime clock */
 #define CONFIG_MCFRTC

include/configs/MPC8349ITX.h

@@ -360,16 +360,9 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_PCI2_IO_SIZE	0x01000000	/* 16M */
 #endif
 
-#define _IO_BASE		0x00000000	/* points to PCI I/O space */
-
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
-#ifdef CONFIG_RTL8139
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x)	    (x)
-#endif
-
 #ifndef CONFIG_PCI_PNP
     #define PCI_ENET0_IOADDR	0x00000000
     #define PCI_ENET0_MEMADDR	CONFIG_SYS_PCI2_MEM_BASE

include/configs/MPC8536DS.h

@@ -427,12 +427,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #undef CONFIG_TULIP
 #undef CONFIG_RTL8139
 
-#ifdef CONFIG_RTL8139
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x)		({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);})
-#define _IO_BASE	0x00000000
-#endif
-
 #ifndef CONFIG_PCI_PNP
 	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCI1_IO_BUS
 	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCI1_IO_BUS

include/configs/MPC8544DS.h

@@ -340,12 +340,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #undef CONFIG_TULIP
 #define CONFIG_RTL8139
 
-#ifdef CONFIG_RTL8139
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x)		(x)
-#define _IO_BASE	0x00000000
-#endif
-
 #ifndef CONFIG_PCI_PNP
 	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCI1_IO_BUS
 	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCI1_IO_BUS

include/configs/MPC8572DS.h

@@ -484,12 +484,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #undef CONFIG_TULIP
 #undef CONFIG_RTL8139
 
-#ifdef CONFIG_RTL8139
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x)		(x)
-#define _IO_BASE	0x00000000
-#endif
-
 #ifndef CONFIG_PCI_PNP
 	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCIE3_IO_BUS
 	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCIE3_IO_BUS

include/configs/MPC8610HPCD.h

@@ -280,10 +280,6 @@
 #define CONFIG_SYS_PCI1_IO_VIRT	0xe1000000
 #define CONFIG_SYS_PCI1_IO_SIZE	0x00100000	/* 1M */
 
-/* For RTL8139 */
-#define KSEG1ADDR(x)	({u32 _x = le32_to_cpu(*(u32 *)(x)); (&_x); })
-#define _IO_BASE		0x00000000
-
 /* controller 1, Base address 0xa000 */
 #define CONFIG_SYS_PCIE1_MEM_BUS	0xa0000000
 #define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BUS

include/configs/MPC8641HPCN.h

@@ -348,10 +348,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 				 | CONFIG_SYS_PHYS_ADDR_HIGH)
 #define CONFIG_SYS_PCI1_IO_SIZE	0x00010000	/* 64K */
 
-/* For RTL8139 */
-#define KSEG1ADDR(x)		({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);})
-#define _IO_BASE		0x00000000
-
 #ifdef CONFIG_PHYS_64BIT
 /*
  * Use the same PCI bus address on PCI1 and PCI2 if we have PHYS_64BIT.

include/configs/MVBLM7.h

@@ -193,8 +193,6 @@
 #define CONFIG_SYS_PCI1_IO_PHYS	0xE2000000
 #define CONFIG_SYS_PCI1_IO_SIZE	0x01000000
 
-#define _IO_BASE		0x00000000
-
 #define CONFIG_NET_MULTI	1
 #define CONFIG_NET_RETRY_COUNT	3
 

include/configs/P2020DS.h

@@ -519,12 +519,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 #undef CONFIG_TULIP
 #define CONFIG_RTL8139
 
-#ifdef CONFIG_RTL8139
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x)		(x)
-#define _IO_BASE	0x00000000
-#endif
-
 #ifndef CONFIG_PCI_PNP
 	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCIE3_IO_BUS
 	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCIE3_IO_BUS

include/configs/mpc7448hpc2.h

@@ -124,8 +124,6 @@
 
 /* Networking Configuration */
 
-#define KSEG1ADDR(a)	(a)	/* Needed by the rtl8139 driver */
-
 #define CONFIG_TSI108_ETH
 #define CONFIG_TSI108_ETH_NUM_PORTS	2
 
@@ -303,8 +301,6 @@
 
 #define CONFIG_SYS_PCI_IO_SIZE		0x01000000	/* 16MB */
 
-#define _IO_BASE		0x00000000	/* points to PCI I/O space      */
-
 /* PCI Config Space mapping */
 #define CONFIG_SYS_PCI_CFG_BASE	0xfb000000	/* Changed from FE000000 */
 #define CONFIG_SYS_PCI_CFG_SIZE	0x01000000	/* 16MB */

include/configs/r2dplus.h

@@ -123,7 +123,5 @@
  */
 #define CONFIG_NET_MULTI
 #define CONFIG_RTL8139
-#define _IO_BASE		0x00000000
-#define KSEG1ADDR(x)		(x)
 
 #endif /* __CONFIG_H */