- 13 7月, 2013 5 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@ti.com>
-
-
由 Simon Glass 提交于
A recent bootm fix left the error path incomplete. If CONFIG_TRACE is set it may still not be a supported command, so cover that with the unsupported subcommand print. Once we handle BOOTM_STATE_OS_GO, we can just move into the error handler itself, no need for a goto there. Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: Update slightly based on Simon's changes to also cover CONFIG_TRACE/BOOTM_STATE_FAKE_OS_GO] Signed-off-by: NTom Rini <trini@ti.com>
-
由 Marek Vasut 提交于
The driver triggered a BUG() in nand_base.c:3214/nand_scan_tail() because the ecc.strength was not set in NAND_ECC_HW_SYNDROME ECC mode. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Benoit Thebaudeau <benoit.thebaudeau@advansee.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Stefano Babic 提交于
A FIT image with a ramdisk that sets the entry or load points to 0x0 must be treated as meaning "leave in place" and NOT "relocate to 0x0". This regression was introduced in a51ec63b. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
- 12 7月, 2013 21 次提交
-
-
git://git.denx.de/u-boot-arm由 Tom Rini 提交于
Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and serial. Conflicts: arch/arm/dts/exynos5250.dtsi Signed-off-by: NTom Rini <trini@ti.com>
-
由 Simon Glass 提交于
The arguments were out of place since commit 983c72f4, since this file was missed and not tested. Correct this. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
If a specific configuraion is selected by the bootm command, e.g. with 'bootm 84000000#recoveryconf' we must honour this for not just the kernel, but also the ramdisk and FDT. In the conversion to using a common fit_image_load() function for loading images from FITs (commits a51ec63b and 53f375fa) this feature was lost. Reinstate it by passing the selected configuration back from fit_image_load() to boot_get_kernel(), then use this configuration (which is stored in images->fit_uname_cfg) in both boot_get_ramdisk() and boot_get_fdt(). Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The OS function is now always called with the PREP stage. Adjust the remaining bootm OS functions to deal with this correctly. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This is not needed as we already print 'OK' later in all cases. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
With ELDK4.2 we were getting a warning that load_end may be used uninitialized in calling lmb_reserve. This could not be the case, however. If we re-order the checks (and make them slightly clearer as well) the warning goes away. bootm_load_os may only return 0 on success, BOOTM_ERR_OVERLAP in a non-fatal overlap (already covered in comments) or a fatal BOOTM_ERR that is covered in the error handler. Signed-off-by: NTom Rini <trini@ti.com>
-
由 Albert ARIBAUD 提交于
-
由 Otavio Salvador 提交于
OpenEmbedded has change partitioning layout of generated image so it does not raise warnings during the boot regarding unkown partition being used for U-Boot. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br> Acked-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Otavio Salvador 提交于
OpenEmbedded has change partitioning layout of generated image so it does not raise warnings during the boot regarding unkown partition being used for U-Boot. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br> Acked-by: NStefano Babic <sbabic@denx.de>
-
由 Otavio Salvador 提交于
OpenEmbedded has change partitioning layout of generated image so it does not raise warnings during the boot regarding unkown partition being used for U-Boot. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br> Acked-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Otavio Salvador 提交于
OpenEmbedded has change partitioning layout of generated image so it does not raise warnings during the boot regarding unkown partition being used for U-Boot. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br> Acked-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Otavio Salvador 提交于
OpenEmbedded has change partitioning layout of generated image so it does not raise warnings during the boot regarding unkown partition being used for U-Boot. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br> Acked-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Otavio Salvador 提交于
OpenEmbedded has change partitioning layout of generated image so it does not raise warnings during the boot regarding unkown partition being used for U-Boot. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br> Acked-by: NJason Liu <r64343@freescale.com>
-
由 Marek Vasut 提交于
The MX28 multi-layer AHB bus can be too slow and trigger the FEC DMA too early, before all the data hit the DRAM. This patch ensures the data are written in the RAM before the DMA starts. Please see the comment in the patch for full details. This patch was produced with an amazing help from Albert Aribaud, who pointed out it can possibly be such a bus synchronisation issue. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Tested-by: NFabio Estevam <fabio.estevam@freescale.com> Tested-by: NAlexandre Pereira da Silva <aletes.xgr@gmail.com>
-
由 Marek Vasut 提交于
Remove incorrectly called and duplicate flush_dcache_range() call from fec_mxc driver. The call is not needed, since the caches are already flushed in fec_tbd_init(), moreover the second argument should be the ending address, not size. Signed-off-by: NMarek Vasut <marex@denx.de> Reported-by: NAlbert Aribaud <albert.u.boot@aribaud.net> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com>
-
由 Marek Vasut 提交于
this is usefull when writing an UBI image which contains and UBIFS volume (check README.nand and UBI FAQ for more details) Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
-
由 Stephen Warren 提交于
Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Stephen Warren 提交于
Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Jim Lin 提交于
Add USB EHCI, storage and network support. Tested on Tegra30 Cardhu, and Tegra114 Dalmore platforms. All works well. Signed-off-by: NJim Lin <jilin@nvidia.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Jim Lin 提交于
Tegra30 and Tegra114 are compatible except PLL parameters. Tested on Tegra30 Cardhu, and Tegra114 Dalmore platforms. All works well. Signed-off-by: NJim Lin <jilin@nvidia.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Jim Lin 提交于
Add DT node for USB EHCI function. Add support for T30-Cardhu, T30-Beaver, T114-Dalmore boards. Signed-off-by: NJim Lin <jilin@nvidia.com> Reviewed-by: NStephen Warren <swarren@nvidia.com> Tested-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 11 7月, 2013 3 次提交
-
-
由 Albert ARIBAUD 提交于
-
由 Mike Dunn 提交于
Newer gcc versions warn about unused variables. This patch corrects a few of those warnings that popped up in a build for the palmtreo680 board. Signed-off-by: NMike Dunn <mikedunn@newsguy.com>
-
由 Łukasz Majewski 提交于
The DFU's state machine original implementation author and copyright were missing. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Acked-by: NStefan Schmidt <stefan@datenfreihafen.org>
-
- 10 7月, 2013 8 次提交
-
-
由 Tom Rini 提交于
As a zImage does not have a U-Boot header, we cannot really do what BOOTM_STATE_FINDOTHER does, exactly. Break the ramdisk/fdt portions of bootm_find_other into bootm_find_ramdisk/fdt which can be called in both cases. Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
Like 'bootm', 'bootz' needs to consume 'bootz' so that the rest of the state functions will work. Signed-off-by: NTom Rini <trini@ti.com>
-
由 Simon Glass 提交于
In the recent bootm refactor, the PREP stage was missing in the bootz command. This causes unpredictable behaviour. The use of a local variable means that the reset of cmd_bootm.c does not in fact use the same image structure, so remove this. Also manually set the OS type to Linux, since this is the only possibility at present, and we need to select the right boot function. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This function has no prototype in the headers and passes void * around, thus requiring several casts. Tidy this up. - Add new patch to clean up bootz_setup() function Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The original bootm code (before commit 35fc84fa) did not check for a valid boot function in the subcommand case, which was incorrect. This check was introduced in all cases, but in fact we should only check for the function when we need it. Otherwise in some cases the check fires before the OS type is known. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
With the move of the interrupt code to earlier in the sequence, we exposed a problem where the interrupts are disabled at each bootm stage. This is not correct - it should be done only once. Let's disable interrupts in the LOAD stage. Put the code in a function for clarity. Also, bootz lost its interrupt code altogether, so reinstate it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
-
由 Amar 提交于
This patch resolves the below mentioned compilation error of i2c driver for non-FDT case Compilation error: s3c24x0_i2c.c: In function 'board_i2c_init': s3c24x0_i2c.c:544:18: error: 'CONFIG_MAX_I2C_NUM' undeclared (first use in this function) s3c24x0_i2c.c:544:18: note: each undeclared identifier is reported only once for each function it appears in s3c24x0_i2c.c:545:3: warning: implicit declaration of function Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: NAmar <amarendra.xt@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 09 7月, 2013 2 次提交
-
-
由 Minkyu Kang 提交于
There are differnce with clock calcuation by cpu variations. This patch will fix it according to user manual. Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com> Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com>
-
由 Anatolij Gustschin 提交于
Code for checking "splashpos" environment variable is duplicated in drivers, move it to the common function. Call this function also in the bmp display command to consider "splashpos" settings. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Acked-by: NOtavio Salvador <otavio@ossystems.com.br>
-
- 05 7月, 2013 1 次提交
-
-
由 Łukasz Majewski 提交于
Add support for disabling battery charging with ctrl+C keyboard combination pressed. Moreover the battery update is done more frequently. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-