提交 b46694df 编写于 作者: S Stephen Warren 提交者: Tom Warren

ARM: tegra: enable LCD panel on Harmony

Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NTom Warren <twarren@nvidia.com>
上级 d6cf707e
......@@ -17,6 +17,17 @@
reg = <0x00000000 0x40000000>;
};
host1x {
status = "okay";
dc@54200000 {
status = "okay";
rgb {
status = "okay";
nvidia,panel = <&lcd_panel>;
};
};
};
serial@70006300 {
clock-frequency = < 216000000 >;
};
......@@ -70,4 +81,25 @@
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <8>;
};
lcd_panel: panel {
clock = <42430000>;
xres = <1024>;
yres = <600>;
left-margin = <138>;
right-margin = <34>;
hsync-len = <136>;
lower-margin = <4>;
upper-margin = <21>;
vsync-len = <4>;
hsync-active-high;
vsyncx-active-high;
nvidia,bits-per-pixel = <16>;
nvidia,pwm = <&pwm 0 0>;
nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */
nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */
nvidia,panel-timings = <0 0 200 0 0>;
};
};
......@@ -22,6 +22,7 @@
*/
#include <common.h>
#include <lcd.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
......@@ -59,3 +60,9 @@ void pin_mux_usb(void)
/* USB2 PHY reset GPIO */
pinmux_tristate_disable(PINGRP_UAC);
}
void pin_mux_display(void)
{
pinmux_set_func(PINGRP_SDC, PMUX_FUNC_PWM);
pinmux_tristate_disable(PINGRP_SDC);
}
......@@ -49,6 +49,7 @@
#define CONFIG_MACH_TYPE MACH_TYPE_HARMONY
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT /* Make sure LCD init is complete */
/* SD/MMC */
#define CONFIG_MMC
......@@ -83,6 +84,14 @@
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
/* LCD support */
#define CONFIG_LCD
#define CONFIG_PWM_TEGRA
#define CONFIG_VIDEO_TEGRA
#define LCD_BPP LCD_COLOR16
#define CONFIG_SYS_WHITE_ON_BLACK
#define CONFIG_CONSOLE_SCROLL_LINES 10
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册