- 24 5月, 2018 8 次提交
-
-
由 Eugen Hristev 提交于
dm_warn is too noisy, replace with dev_dbg for less noise. Based on original work by Wenyou Yang Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
-
由 Eugen Hristev 提交于
We have a new demo layout of our sama5 boards for the NAND Flash memory. According to this new layout, adjust the mtdparts variable in bootargs to align with this, which is available at : http://www.at91.com/linux4sam/bin/view/Linux4SAM/Sama5d3XplainedMainPage#NAND_Flash_demo_Memory_map, Based on original work by Wenyou Yang Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
-
由 Nicolas Ferre 提交于
In order to have a single ENV_OFFSET to manage, use the same as the sama5 one. This address matches our NAND flash map available at: http://www.at91.com/linux4sam/bin/view/Linux4SAM/Sama5d3XplainedMainPage#NAND_Flash_demo_Memory_mapSigned-off-by: NNicolas Ferre <nicolas.ferre@microchip.com> [eugen.hristev@microchip.com: rework on latest version of u-boot] Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
-
由 Nicolas Ferre 提交于
Fix the unaligned environment address. This address matches our NAND flash map available at: http://www.at91.com/linux4sam/bin/view/Linux4SAM/Sama5d3XplainedMainPage#NAND_Flash_demo_Memory_mapSigned-off-by: NNicolas Ferre <nicolas.ferre@microchip.com> [eugen.hristev@microchip.com: rework on latest version of u-boot] Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
-
由 Tom Rini 提交于
We only call fit_conf_print from one place in the code, so mark it as static and move it up to where we call it. This in turn has us move a few other already static functions up further as well. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
- Add an SPDX license tag to the file, saying it's GPL-2.0. - From the Linux Kernel v4.17-rc4, import the "License identifier syntax" section as-is from Documentation/process/license-rules.rst and then change it to be clearer about examples from the Linux Kernel vs examples found in U-Boot, and when we're talking about U-Boot. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Alex Kiernan 提交于
Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig. Split the command handling from the underlying support and expose this through CMD_MMC_RPMB. Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com>
-
由 Tom Rini 提交于
- The correct way to build with thumb mode is to select SYS_THUMB_BUILD - We should be setting -march=armv7-m in arch/arm/Makefile not the sub-config.mk file. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 23 5月, 2018 4 次提交
-
-
由 Tom Rini 提交于
- Xilinx aarch64 is caught in the general xilinx arm job, exclude from the general aarch64 job. - Give the generic aarch64 job a better name - Re-sort the PowerPC jobs so that we can complete them a bit quicker. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Daniel Schwierzeck 提交于
Add support for gcc versions 7.3.0, 6.4.0 and 4.9.4. Also use a regex for matching the tarball names. Some gcc versions use '-ARCH-' instead of '_ARCH-'. As part of this, we switch TravisCI to also using these toolchains for all platforms. Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
- spl_board_init is empty on smartweb so drop that function - When CONFIG_AT91SAM9_WATCHDOG is set we do not disable the watchdog in SPL and instead let full U-Boot handle it. Instead of an empty function just do not call a function. Signed-off-by: NTom Rini <trini@konsulko.com>
-
-
- 22 5月, 2018 6 次提交
-
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
For booting Linux in the generic distro mechanism, cmd/pxe.c retrieves the FDT file name from "fdtfile" environment variable. Rename "fdt_file" to "fdtfile" for easier migration to distro boot. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Kunihiko Hayashi 提交于
Change the phy-mode property to 'internal' that means to use a built-in PHY implemented on LD11 SoC. Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Kunihiko Hayashi 提交于
Add clock-names and reset-names because this node recognizes multiple clocks and resets. ("ether", and so on, for each) Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Kunihiko Hayashi 提交于
The GIO clock/reset, another MAC clock, and the PHY clock are required for the ethernet of Pro4 SoC. Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Kunihiko Hayashi 提交于
Add syscon-phy-mode property specifying a phandle of system controller to each ethernet node. Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 20 5月, 2018 15 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
-
-
-
由 Marek Vasut 提交于
Drop per-SoC Makefile entries and replace them with one unified entry now that the PFC tables are gone. Shuffle the Makefile around a bit to make it more organized. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
All the boards use new modern PFC framework, the old PFC tables are no longer used, so remove them. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
All the boards use new modern PFC framework, the old PFC tables are no longer used, so remove them. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
All the boards use new modern PFC framework, the old PFC tables are no longer used, so remove them. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
All the boards use new modern PFC framework, the old PFC tables are no longer used, so remove them. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
All the boards use new modern PFC framework, the old PFC tables are no longer used, so remove them. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
The V2H Blanche port was broken since some time. This patch updates the V2H Blanche port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Enable the DM capable driver instead of the legacy one. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Enable the DM capable driver instead of the legacy one. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Add derivative of the rcar_i2c driver which is capable of probing itself from DM and uses DT. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Remove the rcar_i2c driver, since it's no longer used by any board and will be superseded by a DM and DT capable variant. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 19 5月, 2018 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 18 5月, 2018 6 次提交
-
-
由 Mugunthan V N 提交于
devm_zalloc() is already defined in dm/device.h header, so devm_zalloc can be removed from linux_compact.h beader file. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Switch to DM_USB was done and there is no need to keep !DM_USB code in tree. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Michal Simek 提交于
Remove harcoded XHCI lists and detect mode, speed based on DT. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Serial-changes: 2 - Remove also XHCI macros from hardware.h - Remove additional new line in zcu106
-
由 Michal Simek 提交于
The patch is adding support for DM_USB for xhci driver. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
By enabling BLK by default this is the next driver which needs to get support for DM_USB. Adding generic DWC3 glue logic which only parse nodes and read device mode. Based on it probe proper host/peripheral DWC3 drivers for it. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Mugunthan V N 提交于
Add support to get maximum speed from dt so that usb drivers makes use of it for DT parsing. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com> (rebase and fix errors) Reviewed-by: NSimon Glass <sjg@chromium.org>
-