- 10 9月, 2016 1 次提交
-
-
由 Tom Rini 提交于
In some cases we were missing CONFIG_USB=y so enable that when needed. Reviewed-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 05 8月, 2016 1 次提交
-
-
由 Masahiro Yamada 提交于
We need to ensure that CONFIG_PHYS_64BIT is configured via Kconfig so that it is always available to the build system. Otherwise we can run into cases where we have inconsistent sizes of certain attributes. Ravi Babu reported offset mismatch of struct dwc3 across files since commit 95ebc253 ("types.h: move and redefine resource_size_t"). Since the commit, resource_addr_t points to phys_addr_t, whose size is dependent on CONFIG_PHYS_64BIT for ARM architecture. I tried my best to use "select" where possible (for example, ARMv8 architecture) because I think this kind of option is generally user- unconfigurable. However, I see some of PowerPC boards have 36BIT defconfigs as well as 32BIT ones. I moved CONFIG_PHYS_64BIT to the defconfigs for such boards. CONFIG_36BIT is no longer referenced, so all of the defines were removed from CONFIG_SYS_EXTRA_OPTIONS. Fixes: 95ebc253 ("types.h: move and redefine resource_size_t") Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reported-by: NRavi Babu <ravibabu@ti.com> Acked-by: NStefan Roese <sr@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 22 7月, 2016 1 次提交
-
-
由 Scott Wood 提交于
Loading the fdt at 0xc00000 fails if the uncompressed kernel image is greater than 12 MiB, which is quite common with modern kernels and multiplatform defconfigs. Move fdtaddr to 0x1e00000 which is just under the ramdiskaddr on most targets. Signed-off-by: NScott Wood <oss@buserror.net> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Dirk Eibach <eibach@gdsys.de> Cc: Andy Fleming <afleming@gmail.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 10 6月, 2016 1 次提交
-
-
由 Heiko Schocher 提交于
move CONFIG_BOOTDELAY into a Kconfig option. Used for this purpose the moveconfig.py tool in tools. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
- 04 5月, 2016 1 次提交
-
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
- 26 4月, 2016 4 次提交
-
-
由 Tom Rini 提交于
Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
A number of moveconfig.py runs have left a instances of multiple empty lines in a row. Correct this to a single empty line. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 15 3月, 2016 2 次提交
-
-
由 Simon Glass 提交于
There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing boards. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 25 11月, 2015 2 次提交
-
-
由 Bin Meng 提交于
There are already Kconfig options for SPI flash drivers, but we have not moved them from config.h to defconfig files. This commit does this in a batch. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
There are already Kconfig options for SPI drivers, but we have not moved them from config.h to defconfig files. This commit does this in a batch. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
- 22 11月, 2015 1 次提交
-
-
由 Thomas Chou 提交于
Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py. Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
-
- 30 10月, 2015 1 次提交
-
-
由 Gong Qianyu 提交于
For most PPC platforms, they will call the first get_clocks() in init_sequence_f[] as they define CONFIG_PPC. CONFIG_SYS_FSL_CLK is then defined to call the second get_clocks(), which should be redundant for PPC. Signed-off-by: NGong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 25 10月, 2015 2 次提交
-
-
由 Gong Qianyu 提交于
get_clocks() should not be limited by ESDHC. Signed-off-by: NGong Qianyu <Qianyu.Gong@freescale.com>
-
由 Masahiro Yamada 提交于
We have finished Generic Board conversion for ARM and PowerPC, i.e. all the boards have been converted except OpenRISC, SuperH, SPARC, which have not supported Generic Board framework yet. Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro defines in include/configs/*.h. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 21 10月, 2015 1 次提交
-
-
由 Bin Meng 提交于
Convert CONFIG_CMD_ELF to Kconfig and tidy up affected boards. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
- 31 8月, 2015 1 次提交
-
-
由 Simon Glass 提交于
Convert all TPM options to Kconfig and tidy up. Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NChristophe Ricard <christophe-h.ricard@st.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
- 26 6月, 2015 2 次提交
-
-
由 Joe Hershberger 提交于
This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Joe Hershberger 提交于
Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 01 6月, 2015 2 次提交
-
-
由 Joe Hershberger 提交于
This also selects CONFIG_NET for any CONFIG_CMD_NET board. Remove the imx default for CONFIG_NET. This moves the config that was defined by 60296a83 (commands: add more command entries in Kconfig). Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
Another shell scripting command that has not been moved. Moved using tools/moveconfig.py using these settings: CMD_SETEXPR bool n y Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
-
- 25 9月, 2014 1 次提交
-
-
由 Masahiro Yamada 提交于
CONFIG_CMD_BOOTM is defined in config_cmd_defaults.h which is forcebly included from each board. So, the default value of "config CMD_BOOTM" should be "y". For some boards undefining it (bf506f-ezkit, controlcenterd_TRAILBLA, controlcenterd_TRAILBLAZER_DEVELOP, controlcenterd_TRAILBLAZER), "# CONFIG_CMD_BOOTM is not set" should be added to their defconfig. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 25 7月, 2014 1 次提交
-
-
由 Dirk Eibach 提交于
Add the generic board infrastructure to all gdsys boards. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 08 7月, 2014 1 次提交
-
-
由 Dirk Eibach 提交于
The I2C bridge on DP501 supports EDID, MCCS and HDCP by default. Allow EDID only to avoid I2C address conflicts. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
- 25 1月, 2014 1 次提交
-
-
由 Masahiro Yamada 提交于
Define CONFIG_MPC85xx in arch/powerpc/cpu/mpc85xx/config.mk because all target boards with mpc85xx cpu define it. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 26 11月, 2013 1 次提交
-
-
由 York Sun 提交于
Freescale DDR driver has been used for mpc83xx, mpc85xx, mpc86xx SoCs. The similar DDR controllers will be used for ARM-based SoCs. Signed-off-by: NYork Sun <yorksun@freescale.com>
-
- 05 11月, 2013 2 次提交
-
-
由 Rob Herring 提交于
Remove platform CONFIG_SYS_HZ definition for configs a-z*. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
The definitions for CONFIG_SYS_PROMPT are varied with little reason other than to display the board name. Over half the definitions are "==> ", so make this the default. The rest of the boards remain unchanged to avoid breaking any external scripts expecting a certain prompt. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Reviewed-by: NFabio Estevam <fabio.estevam@freescale.com>
-
- 23 7月, 2013 1 次提交
-
-
由 Heiko Schocher 提交于
- added to fsl_i2c driver new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@wwwdotorg.org>
-
- 17 7月, 2013 1 次提交
-
-
由 Dirk Eibach 提交于
The gdsys ControlCenter Digital board is based on a Freescale P1022 QorIQ SOC. It boots from SPI-Flash but can be configured to boot from SD-card for factory programming and testing. On board peripherals include: - 2x GbE - Lattice ECP3 FPGA connected via PCIe - mSATA RAID1 - USB host - DisplayPort video output - Atmel TPM Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: NReinhard Pfau <reinhard.pfau@gdsys.cc> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-