- 15 11月, 2018 3 次提交
-
-
由 Mario Six 提交于
When the DM CPU drivers are active, printing information about a CPU should be delegated to a matching driver. Hence, add a static print_cpuinfo that implements this delegation when DM CPU drivers are active. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMario Six <mario.six@gdsys.cc> Changed condition to CONFIG_IS_ENABLED(CPU): Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
This brings in the u-boot-net PR from Joe.
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 14 11月, 2018 4 次提交
-
-
由 Anatolij Gustschin 提交于
Commit fb01e07a accidentally broke initialisation of GPIO descriptor flags from device tree: currently the active low flag from gpio-specifier is always ignored. Fix it. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: Mario Six <mario.six@gdsys.cc>
-
由 Tom Rini 提交于
Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms that had been enabling it turn it on by hand. This exposed that we had not yet migrated CMD_MTDPARTS fully, so do so now. Fixes: 86dfa556 ("cmd: ubi: Remove useless call to mtdparts_init()") Signed-off-by: NTom Rini <trini@konsulko.com>
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 13 11月, 2018 5 次提交
-
-
由 Boris Brezillon 提交于
Commit 9c5b0097 ("Convert CONFIG_MTD_PARTITIONS et al to Kconfig") introduced a publicly visible Kconfig entry for the CONFIG_MTD_PARTITIONS option, while the rework on MTD partitioning was in progress, and we somehow did not notice that the same Kconfig entry was added by commit 4048a5c5 ("mtd: declare MTD_PARTITIONS symbol in Kconfig"), but this time as an invisible entry (this can only be selected by other options). Keep the non-visible version of this symbol, since MTD_PARTITIONS is not something the user should be able to enable/disable directly. Fixes: 4048a5c5 ("mtd: declare MTD_PARTITIONS symbol in Kconfig") Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
由 Boris Brezillon 提交于
Commit c58fb2cd ("cmd: ubi: clean the partition handling") introduced a call to mtd_probe_devices() in the ubi_attach() path and this function takes care of parsing mtdparts/mtdids and creating/registering the associated mtd partitions. The mtdparts_init() call in the ubi_detach() path is not only unnecessary but can sometimes print error messages even when things work properly (that's the case with SPI NAND devices that have not been probed with 'mtd list'), which is misleading. Remove this call to mtdparts_init() and drop the dependency on CMD_MTDPARTS. Fixes: c58fb2cd ("cmd: ubi: clean the partition handling") Reported-by: NStefan Roese <sr@denx.de> Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com> Tested-by: NStefan Roese <sr@denx.de> Reviewed-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
由 Boris Brezillon 提交于
gwventana configs are relying on CMD_UBI to select CMD_MTDPARTS, which is then making {MTDIDS,MTDPARTS}_DEFAULT options available. We are about to remove the 'select CMD_MTDPARTS' statement in the CMD_UBI entry, but if we do that without first making sure {MTDIDS,MTDPARTS}_DEFAULT are visible, we end up with a build failure when building gwventana configs. Address that by adding a depends on MTD_PARTITIONS to {MTDIDS,MTDPARTS}_DEFAULT which does the trick since CMD_UBI selects MTD_UBI which in turn selects MTD_PARTITIONS. We also get rid of the depends on CMD_MTD, since CMD_MTD also selects MTD_PARTITIONS. Reported-by: NJagan Teki <jagan@amarulasolutions.com> Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
由 Boris Brezillon 提交于
dfu_fill_entity_nand() uses find_dev_and_part() and mtdparts_init() which are provided by cmd/mtdparts.c. Add the dependency to avoid build failures when CMD_MTDPARTS is not selected. Reported-by: NJagan Teki <jagan@amarulasolutions.com> Fixes: 6828e602 ("dfu: Migrate to Kconfig") Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
由 Boris Brezillon 提交于
U-boot provides a mean to define default values for mtdids and mtdparts when they're not defined in the environment. Patch mtd_probe_devices() to use those default values when env_get("mtdparts") or env_get("mtdids") return NULL. This implementation is based on the logic found in cmd/mtdparts.c. Fixes: 5db66b3a ("cmd: mtd: add 'mtd' command") Reported-by: NStefan Roese <sr@denx.de> Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com> Tested-by: NStefan Roese <sr@denx.de> Reviewed-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
- 12 11月, 2018 5 次提交
-
-
-
由 Marcel Ziswiler 提交于
The make macro to check if the binary exceeds the board size limit is taken straight from the root Makefile. Without this and e.g. enabled EFI Vybrid fails booting as the regular size limit check does not take the final u-boot.imx binary size into account which is bigger due to alignment as well as IMX header stuff. Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: NFabio Estevam <festevam@gmail.com>
-
由 Marcel Ziswiler 提交于
Drop SPI support saving precious 4 Kb on boards with tough size restrictions. Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>
-
由 Marcel Ziswiler 提交于
Unset CONFIG_CMDLINE_EDITING saving precious 4 Kb on boards with tough size restrictions. Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
-
由 Marcel Ziswiler 提交于
Unset CONFIG_EFI_UNICODE_CAPITALIZATION on boards with tough size restrictions. This is analogous to commit a90bf07a ("efi_loader: unset CONFIG_EFI_UNICODE_CAPITALIZATION"). Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: NAlexander Graf <agraf@suse.de>
-
- 10 11月, 2018 2 次提交
-
-
由 Marek Vasut 提交于
This patch adds check for command response CRC failure. The driver is currently ignoring CRC check failure on command resposes which have CRC atteched to it, which can be potentially dangerous. Even more grueling problem happens when the command response is followed by data transfer though, as in that case, the dwmci_data_transfer() function will spin until it reaches the 240s timeout. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Jun Nie 提交于
Build ymodem only on need to shrink spl image size. Signed-off-by: NJun Nie <jun.nie@linaro.org>
-
- 09 11月, 2018 5 次提交
-
-
由 Lars Povlsen 提交于
common/common_fit.c is including <spl.h>, but not actually using it. The inclusion will cuase compile error on platforms using CONFIG_OF_SEPARATE and not SPL. Signed-off-by: NLars Povlsen <lars.povlsen@microsemi.com> Reviewed-by: NJean-Jacques Hiblot <jjhiblot@ti.com>
-
由 Andy Shevchenko 提交于
The commit 484fdf5b ("dm: Add support for all targets which requires MANUAL_RELOC") introduces subtle typo, i.e. missed semicolon. Fixes: 484fdf5b ("dm: Add support for all targets which requires MANUAL_RELOC") Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Simon Goldschmidt 提交于
Tiny printf does not support %.*s and %lX. Since tiny printf should be very common in SPL, replace these by %32s (for printing image name) and %lx. Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
Add mailing list for stm32mp architecture and board. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Stefan Roese 提交于
Testing has shown that a line-break is missing in one debug line in fit_find_config_node(). Signed-off-by: NStefan Roese <sr@denx.de>
-
- 08 11月, 2018 4 次提交
-
-
由 Christoph Niedermaier 提交于
If the function gpr_init is used in a common MX6 spl implementation we have to ensure that it is only called for suitable cpu types, otherwise it breaks hardware parts like enet1, can1, can2, etc. Signed-off-by: NChristoph Niedermaier <cniedermaier@dh-electronics.de>
-
-
由 Bin Meng 提交于
Due to revert of commit c0434407, this board does not build any more. Disable CONFIG_DISPLAY_CPUINFO for v2018.11 release. This commit should be reverted after v2018.11 release. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
This reverts commit c0434407. It turns out commit c0434407 broke some boards which have DM CPU driver with CONFIG_DISPLAY_CPUINFO option on. These boards just fail to boot when print_cpuinfo() is called during boot. Fixes are already sent to ML and in u-boot-dm/next, however since we are getting close to the v2018.11 release, it's safer we revert the original commit. This commit should be reverted after v2018.11 release. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 07 11月, 2018 4 次提交
-
-
git://git.denx.de/u-boot-microblaze由 Tom Rini 提交于
Xilinx fixes for v2018.11-rc3 - Fix fit loading address for Zynq
-
由 Michal Simek 提交于
Default setup is 0 which is incorrect place because it points to OCM which is allocated for SPL only in our case. Use address in DDR. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Paul Davey 提交于
Add local size_t variable to crypto_comp_decompress as intermediate storage for destination length to avoid memory corruption and incorrect results on 64 bit targets. This is what linux does for the various lz compression implementations. Signed-off-by: NPaul Davey <paul.davey@alliedtelesis.co.nz> Cc: Heiko Schocher <hs@denx.de> Tested-by: NHeiko Schocher <hs@denx.de>
-
-
- 06 11月, 2018 8 次提交
-
-
-
-
由 Stefan Roese 提交于
The new board version has the 2nd FPGA connected via CS# 0 instead of 2 on SPI bus 1. Change this setup in the DT accordingly. Please note that this change does still work on the old board version because the CS signal is not used on this board. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
Add the "spi-flash" compatible string so that the generic sf_probe driver can probe the SPI flash on the theadorable Armada-XP board. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
With patch 49b23e03 (pci: mvebu: Increase size of PCIe default mapping) the mapping size for each PCI(e) controller was increased from 32MiB to 128MiB. This leads to problems on boards with multiple PCIe slots / ports which are unable to map all PCIe ports, e.g. the Armada-XP theadorable: DRAM: 2 GiB (667 MHz, 64-bit, ECC not enabled) SF: Detected m25p128 with page size 256 Bytes, erase size 256 KiB, total 16 MiB Cannot add window '4:f8', conflicts with another window PCIe unable to add mbus window for mem at f0000000+08000000 Model: Marvell Armada XP theadorable This patch moves the base address for the PCI(e) memory spaces from 0xe8000000 to the end of SDRAM (clipped to a max of 0xc0000000 right now). This gives move room and flexibility for PCI(e) mappings. Signed-off-by: NStefan Roese <sr@denx.de> Cc: VlaoMao <vlaomao@gmail.com> Tested-by: VlaoMao <vlaomao at gmail.com>
-
由 Peng Fan 提交于
Add NXP linux team upstream maillist as reviewer Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Fabio Estevam 提交于
Commit 3c28576b ("arm: dts: imx8qxp: fix build warining") fixed the dts warning by removing the unnecessary #address-cells/#size-cells, but the recommendation for regulators is not to place them under "simple-bus", so move the reg_usdhc2_vmmc regulator accordingly. Signed-off-by: NFabio Estevam <festevam@gmail.com>
-
由 Fabio Estevam 提交于
board/freescale/mx8mq_evk/README has been introduced by mistake in commit d0dd7397 ("imx: add i.MX8QXP MEK board support") Remove it for now as this should be introduced when mx8mq_evk support is in place. Reported-by: NTim Harvey <tharvey@gateworks.com> Signed-off-by: NFabio Estevam <festevam@gmail.com> Reviewed-by: NPeng Fan <peng.fan@nxp.com>
-